Tensile behaviour of corroded and hydrogen embrittled 2024 T351 aluminum alloy specimen

The synergetic effect of corrosion and corrosion induced hydrogen embrittlement damage processes which occur at local scale has been found to result in a dramatic macroscopic tensile ductility loss of the 2024 aluminum alloy. In the present work, the tensile behaviour of corroded 2024 T351 specimens has been estimated on the basis of FE analysis by taking into account the local material properties in the damaged areas. A parametric study is involved to account for the effect of thickness in the results. Calculated tensile properties obtained with the analysis agree well with experimental data.     

Investigation of multicomponent fluoride optical materials in the UV spectral region: I. Single crystals of Ca1−x R xF2+x (R = Sc, Y, La, Yb, Lu) solid solutions

Crystalline materials that are transparent in the vacuum UV spectral region and currently used have been reviewed. Transmission of crystals of solid solutions with the fluorite structure Ca_1?x R _xF_2+x (R = Sc, Y, La, Yb, Lu) in the UV and vacuum UV spectral regions has been investigated. It is shown that application of different methods of purification of fluorides from some impurities can significantly improve the optical quality of fluoride multicomponent crystals in the short-wavelength spectral region.     

Inverse Problem for a Mathematical Model of Adsorption Dynamics

A mixed problem is considered for a system of partial differential equations modeling the process of adsorption dynamics. An existence and uniqueness theorem is proved for this problem, and the solution properties are investigated. The inverse problem is posed, involving the determination of the system coefficient given additional information about the solution. A uniqueness theorem is proved for the solution of the inverse problem.__________Translated from Prikladnaya Matematika i Informatika, No. 16, pp. 5 – 14, 2004.     

Effect of ethylene glycol on the formation of extended crystals of M1/3Co2/3C2O4 · 2H2O (M = Zn, Mn) oxalates and their thermolysis products

The effect of ethylene glycol (EG) on the formation of whiskers and fibers of complex oxides with the general formula MCo₂O₄ upon the thermolysis of M_1/3Co_2/3C₂O₄ (M = Zn, Mn) oxalates has been studied. New compounds (solvates) are formed when powdered oxalates are heated with EG. In the solvates, EG molecules substitute for water molecules according to the reaction M_1/3Co_2/3C₂O₄ · 2H₂O + HOCH₂CH₂OH = M_1/3Co_2/3C₂O₄(HOCH₂CH₂OH) + 2H₂O. The solvates have been characterized using X-ray powder diffraction, microscopy, IR spectroscopy, thermogravimetry, and chemical analysis. The shape, structure, and particle size of the thermolysis products of EG-modified oxalates have been determined using scanning electron microscopy.     

A topological analysis of electron density and chemical bonding in cyclophosphazenes PnNnX2n (X = H, F, Cl; n = 2, 3, 4)

The restricted Hartree-Fock method was used to determine the cycle size effects on the geometric parameters of several inorganic templates, cyclophosphazenes P_nN_nX_2n (X = H, F, Cl; n = 2, 3, 4). A topological analysis of local electronic properties at the electron density critical points of bonds allowed us to quantitatively characterize the chemical bond in cyclophosphazenes and its dependence on the cycle size and substituents at phosphorus. The calculated distributions of the electron density Laplacian and electron pair localization functions revealed the special features of the electronic structure of the nitrogen and phosphorus atoms. These results explain the nature of noncovalent interactions between the P atoms of one cyclophosphazene molecule and the N atoms of the other.     

Vascular morphology by three-dimensional magnetic resonance imaging

A three-dimensional examination of blood vessels is provided using MR data from seven cases. The vascular surfaces are constructed with an algorithm that automatically follows the selected artery or vein and generates a projected three-dimensional gradient shaded image. Fast 3DFT pulse sequences were optimized to enhance the time-of-flight contrast of the intravascular region. By increasing the surface threshold value in a three-dimensional head study, the flesh of a patient's face was peeled away to demonstrate the superfacial temporal artery. Gated cardiac images show the great vessels and cardiac chambers. A three-dimensional view of the aorta shows an irregular surface in the vicinity of an adrenal tumor. 3D MR exams provide a non-invasive technique for assessing vascular morphology in a clinical setting.     

An AFM, XPS and electrochemical study of molecular electroactive monolayers formed by wet chemistry functionalization of H-terminated Si(1 0 0) with vinylferrocene

Molecular electroactive monolayers have been produced from vinylferrocene (VFC) via light-assisted surface anchoring to H-terminated n- and p-Si(1 0 0) wafers prepared via wet chemistry, in a controlled atmosphere. The resulting Si-C bound hybrids have been characterized by means of XPS and AFM. Their performance as semiconductor functionalized electrodes and their surface composition have been followed by combining electrochemical and XPS measurements on the same samples, before and after use in an electrochemical cell. White-light photoactivated anchoring at short (1 h) exposure times has resulted in a mild route, with a very limited impact on the initial quality of the silicon substrate. In fact, the functionalized Si surface results negligibly oxidized, and the C/Fe atomic ratio is close to the value expected for the pure molecular species. The VFC/Si hybrids can be described as (η⁵-C₅H₅)Fe²⁺(η⁵-C₅H₄)-CH₂-CH₂-Si species, on the basis of XPS results. Electrochemical methods have been applied in order to investigate the role played by a robust, covalent Si-C anchoring mode towards substrate-molecule electronic communication, a crucial issue for a perspective development of molecular electronics devices. The response found from cyclic voltammograms for p-Si(1 0 0) functionalized electrodes, run in the dark and under illumination, has shown that the electron transfer is not limited by the number of charge carriers, confirming the occurrence of electron transfer via the Si valence band. The hybrids have shown a noticeable electrochemical stability and reversibility under cyclic voltammetry (cv), and the trend in peak current intensity vs. the scan rate was linear. The molecule-Si bond is preserved even after thousands of voltammetric cycles, although the surface coverage, evaluated from cv and XPS, decreases in the same sequence. An increasingly larger surface concentration of Fe³⁺ at the expenses of Fe²⁺ redox centers has been found at increasing number of cv’s, experimentally associated with the growth of silicon oxide. Surface SiO⁻ groups from deprotonated silanol termination, induced by the electrochemical treatments, are proposed as the associated counterions for the Fe³⁺ species. They could be responsible for the observed decrease in the electron transfer rate constant with electrode ageing.     

Seminorms and Continuity Modules for Functions Defined on a Segment

We describe in detail fundamental properties of continuity modules of various orders in the spaces L ^p of functions defined on a finite segment. We establish some general estimates of seminorms in terms of continuity modules with the best known constants. An example of application of these results to the best approximations is considered. Bibliography: 32 titles.     

A novel approach to the acoustic characterisation of porous road surfaces

Porous road surfaces offer an effective means of reducing the generation and propagation of noise from road traffic. However, the porosity of these surfaces can deteriorate over time, leading to a reduction in their noise reducing properties. Efficient methods are therefore required for monitoring this performance. Existing techniques for performing in-situ measurements of acoustic absorption are unsuitable for use within the traffic stream. Static measurements using time domain Maximum Length Sequence (MLS) based techniques have been demonstrated to offer advantages over traditional techniques, presenting the opportunity for measurements under dynamic conditions. This paper describes the design of a system for carrying out dynamic MLS-based measurements. Results are presented which demonstrate that stable dynamic measurements can be carried out at speeds of up to 30 km/h.