Formation of polymeric micelles with amino surfaces from amphiphilic AB‐type diblock copolymers composed of poly(glycolic acid lysine) segments and polylactide segments

Amphiphilic AB‐type diblock copolymers composed of hydrophobic poly(L ‐lactide) (PLA) segments and hydrophilic poly(glycolic acid lysine) [poly(Glc‐Lys)] segments with amino side‐chain groups self‐associated to form PLA‐based polymeric micelles with amino surfaces in an aqueous solution. The average diameter of the loose core–shell polymeric micelles for poly(Glc‐Lys) [number‐average molecular weight (M_n) = 1240]‐b‐PLA (M_n = 7000) obtained by a dimethyl sulfoxide/water dialysis method was estimated to be about 50 nm in water by dynamic light scattering measurements. The size and shape of the obtained polymeric micelles were further observed with transmission electron microscopy and atomic force microscopy. To investigate the possibility of applying the obtained PLA‐based polymeric micelles as bioabsorbable vehicles for hydrophobic drugs, we tested the entrapment of drugs in poly(Glc‐Lys) (M_n = 1240)‐b‐PLA (M_n = 7000) micelles and their release with doxorubicin as a hydrophobic drug. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 1426–1432, 2002     

A flow-based enzyme-linked immunosorbent assay on a polydimethylsiloxane microchip for the rapid determination of immunoglobulin A

A flow-based enzyme-linked immunosorbent assay (ELISA) on a polydimethylsiloxane (PDMS) microchip has been developed for the rapid determination of immunoglobulin A (IgA). The analytical principle of this integrated method is the same as the conventional sandwich-type ELISA. A primary antibody (anti-IgA) was adsorbed on the surface of a PDMS microchannel, and then an antigen (IgA) and a secondary antibody (anti-IgA HRP labeled) were reacted successively. The resulting antigen-antibody complex, fixed on the surface of the microchannel, was detected using Amplex^® Red and a fluorescent imaging system. The calibration curve of the IgA standard solution was linear in the range of 0-50 ng/mL at the flow rate of 10 μL/min. This flow rate corresponds to the reaction time of 4.8 s. Compared to the conventional assay on a 96-well microtiter plate, the present assay on the microchip dramatically shortened the reaction time necessary for the enzyme-substrate reaction from 30 min to 4.8 s, i.e., to 1/375. The amounts of the reagent and sample were also reduced to 1/100 compared to the 96-well microtiter plate.     

Structural and Physical Properties of New Conducting Cation Radical Salts with Te-Based Counteranions, Tetraiodotellurate(II) and Hexaiododitellurate(II)

This article reports preparation, structure, and conducting property of several cation radical salts of organic donors tetramethyltetrathiafulvalene (TMTTF), ethylenedithiotetrathiafulvalene (EDT-TTF), bis(ethylenedithio)tetrathiafulvalene (ET), bis(ethylenedithio)tetraselenafulvalene (BETS) and hexamethylenetetraselenafulvalene (HMTSF) with two novel planar Te-based dianions, TeI₄²⁻ and Te₂I₆²⁻. (ET)₅Te₂I₆ 1 and (BETS)₅Te₂I₆ 2 are isostructural. In these Te₂I₆²⁻ salts, intermolecular short I···I contacts form a supramolecular corrugated anion sheet. Donor arrangement is similar to the θ-type. With lowering temperature, the resistivity of 1 shows a gradual increase followed by a sharp upturn at 110 K. 2 is metallic down to 120 K and shows a gradual increase of the resistivity followed by a clear transition to an insulating state around 60 K. Crystal structure of (ET)₄TeI₄ 3 is based on the “herring bone” arrangement of ET molecules similar to the α-type. 3 shows a semiconductive behavior around room temperature followed by a transition to an insulating state at 210 K. (EDT-TTF)₄TeI₄ 4, a semiconductor, exhibits a unique two-dimensional arrangement of dimerized EDT-TTF molecules.     

Unconventional Magnetic and Resistive Hysteresis in an Iodine‐Bonded Molecular Conductor

Simultaneous manipulation of both spin and charge is a crucial issue in magnetic conductors. We report on a strong correlation between magnetism and conductivity in the iodine‐bonded molecular conductor (DIETSe)₂FeBr₂Cl₂ [DIETSe=diiodo(ethylenedithio)tetraselenafulvalene], which is the first molecular conductor showing a large hysteresis in both magnetic moment and magnetoresistance associated with a spin‐flop transition. Utilizing a mixed‐anion approach and iodine bonding interactions, we tailored a molecular conductor with random exchange interactions exhibiting unforeseen physical properties.     

Fe K‐Edge X‐ray Absorption Fine Structure Determination of γ‐Al2O3‐Supported Iron‐Oxide Species

The structure of FeO_x species supported on γ‐Al₂O₃ was investigated by using Fe K‐edge X‐ray absorption fine structure (XAFS) and X‐ray diffraction (XRD) measurements. The samples were prepared through the impregnation of iron nitrate on Al₂O₃ and co‐gelation of aluminum and iron sulfates. The dependence of the XRD patterns on Fe loading revealed the formation of α‐Fe₂O₃ particles at an Fe loading of above 10 wt %, whereas the formation of iron‐oxide crystals was not observed at Fe loadings of less than 9.0 wt %. The Fe K‐edge XAFS was characterized by a clear pre‐edge peak, which indicated that the Fe?O coordination structure deviates from central symmetry and that the degree of Fe?O?Fe bond formation is significantly lower than that in bulk samples at low Fe loading (<9.0 wt %). Fe K‐edge extended XAFS oscillations of the samples with low Fe loadings were explained by assuming an isolated iron‐oxide monomer on the γ‐Al₂O₃ surface.     

Unsymmetrical Pincer‐Type Ruthenium Complex Containing β‐Protic Pyrazole and N‐Heterocyclic Carbene Arms: Comparison of Brønsted Acidity of NH Groups in Second Coordination Sphere

A reaction of a 2‐(imidazol‐1‐yl)methyl‐6‐(pyrazol‐3‐yl)pyridine with [RuCl₂(PPh₃)₃] resulted in tautomerization of the imidazole unit to afford the unsymmetrical pincer‐type ruthenium complex 2 containing a protic pyrazole and N‐heterocyclic carbene (NHC) arms. Deprotonation of 2 with one equivalent of a base led to the formation of the NHC–pyrazolato complex 3 , indicating that the protic NHC arm is less acidic. When 2 was treated with two equivalents of a base under H₂ or in 2‐propanol, the hydrido complex 4 containing protic NHC and pyrazolato groups was obtained through metal–ligand cooperation.     

Vinyl Polymerization. 418. Polymerization of Vinyl Monomer Initiated by Betaine-Type Polymers in Aqueous Solution

Abstract

Three kinds of betaine-type polymers, which are macromolecular amphoteric electrolytes, were found to be able to polymerize vinyl monomers in aqueous solution through a radical mechanism without any further initiator. Betain-type polymers form hydrophobic areas (HA) in water. Vinyl polymerization commenced in the HA. The effect of the pH of the aqueous solution on polymerization was investigated.     

Vinyl Polymerization. 431. Vinyl Polymerizations Initiated by Block and Random Poly(Styrene-co-Sodium Methacrylate)

Abstract

The polymerization of some kinds of vinyl monomer was found to occur without an ordinary initiator in aqueous solutions of AB-type block or random copolymers of sodium methacrylate with styrene as a so-called “uncatalyzed polymerization.” Although the spin trapping technique showed that the initiation mechanism by the block copolymer was the same as that by the random copolymer, the initiating ability of the block copolymer was lower than that of the random copolymer. Such results are attributable to the difference in the incorporating ability of monomer into the micelles formed by the block copolymer and into the hydrophobic areas formed by the random copolymer.     

Circumventing air bubbles in microfluidic systems and quantitative continuous-flow PCR applications

Polymerase chain reaction (PCR) is an essential part of research based on genomics or cell analysis. The development of a microfluidic device that would be suitable for high-temperature-based reactions therefore becomes an important contribution towards the integration of micro-total analysis systems (μTAS). However, problems associated with the generation of air bubbles in the microchannels before the introduction of the assay liquid, which we call the “initial start-up” in this study, made the flow irregular and unstable. In this report, we have tried to address these problems by adapting a novel liquid-flow method for high-temperature-based reactions. A PDMS-based microfluidic device was fabricated by soft-lithography techniques and placed on a cartridge heater. The generation of the air bubbles was prevented by introducing the fluorinated oil, an inert and highly viscous liquid, as the cap just before the introduction of the sample solutions into the microchannels. The technique was applied for continuous-flow PCR, which could perform PCR on-chip in a microfluidic system. For the evaluation of practical accuracy, plasmid DNA that serves as a reference molecule for the quantification of genetically modified (GM) maize was used as the template DNA for continuous-flow PCR. After PCR, the products were collected in a vial and analyzed by gel electrophoresis to confirm the accuracy of the results. Additionally, quantitative continuous-flow PCR was performed using TaqMan technology on our PCR device. A laser detection system was also used for the quantitative PCR method. We observed a linear relationship between the threshold cycle (Ct) and the initial DNA concentration. These results showed that it would be possible to quantify the initial copies of the template DNA on our microfluidic device. Accurate quantitative DNA analysis in microfluidic systems is required for the integration of PCR with μTAS, thus we anticipate that our device would have promising potential for applications in a wide range of research.