Thermal stability and electronic structure of atomically uniform Pb films on Si(111)

Atomically uniform Pb films are successfully prepared on Si(111), despite a large lattice mismatch. Angle-resolved photoemission measurements of the electronic structure show layer-resolved quantum well states which can be correlated with dramatic variations in thermal stability. The odd film thicknesses N = 5, 7, and 9 monolayers show sharp quantum well states. The even film thicknesses N = 6 and 8 do not, but are much more stable than the odd film thicknesses. This correlation is discussed in terms of a total energy calculation and Friedel-like oscillations in properties.     

Electrochemical and structural investigations of oxide films anodically formed on ruthenium-plated titanium electrodes in sulfuric acid

The electrochemical characteristics of ruthenium oxides, formed on Ru-plated Ti electrodes in 0.5 M H₂SO₄ by potential cycling with different CV upper potential limits (E _SU), were systematically compared. The repeated potential cycling between 0.2 and 0.75 V activated the formation/reduction of surface Ru oxides with hysteretic behavior. This application of repeated CVs also modified the ability of Ru deposits for hydrogen adsorption/desorption. An irreducible Ru oxide accumulated on the electrode at potentials more positive than ca. 0.95 V, whose capacitive characteristics are applicable for electrochemical supercapacitors. This irreducible oxide was composed of an aggregate consisting of Ru in various oxidation states, bridged oxygen, OH and water in a 3D-like structure with a relatively ordered and compact nature, from the X-ray photoelectron spectroscopic and voltammetric results. The surface reconstruction of the Ru deposits induced by the repeated potential cycling with E _SU≥0.75 V was clearly observed from the SEM photographs. From the X-ray diffraction patterns, all the anodically formed Ru oxides showed an amorphous nature.     

Simultaneous quantification of ondansetron and tariquidar in rat and human plasma using a high performance liquid chromatography‐ultraviolet method

Ondansetron, a widely used antiemetic agent, is a P‐glycoprotein (P‐gp) substrate and therefore expression of P‐gp at the blood–brain barrier limits its distribution to the central nervous system (CNS), which was observed to be reversed by coadministration with P‐gp inhibitors. Tariquidar is a potent and selective third‐generation P‐gp inhibitor, and coadministration with ondansetron has shown improved ondansetron distribution to the CNS. There is currently no reported bioanalytical method for simultaneously quantifying ondansetron with a third‐generation P‐gp inhibitor. Therefore, we aimed to develop and validate a method for ondansetron and tariquidar in rat and human plasma samples. A full validation was performed for both ondansetron and tariquidar, and sample stability was tested under various storage conditions. To demonstrate its utility, the method was applied to a preclinical pharmacokinetic study following coadministration of ondansetron and tariquidar in rats. The presented method will be valuable in pharmacokinetic studies of ondansetron and tariquidar in which simultaneous determination may be required. In addition, this is the first report of a bioanalytical method validated for quantification of tariquidar in plasma samples.     

Polymer blends of polyamide-6 (PA6) and poly(phenylene ether) (PPE) compatibilized by a multifunctional epoxy coupler

A tetrafunctional epoxy monomer, N,N,N′-N′-tetraglycidyl-4,4′-diaminodiphenyl methane (TGDDM), has demonstrated to be a highly efficient reactive compatibilizer in compatibilizing the immiscible and incompatible polymer blends of polyamide-6 (PA6) and poly(2,6-dimethyl-1,4-phenylene ether) (PPE). This epoxy coupler can react with both PA6 and PPE to form various PA6-co-TGDDM-co-PPE mixed copolymers. These interfacially formed PA6-co-TGDDM-co-PPE copolymers tend to anchor along the interface to reduce the interfacial tension and result in finer phase domains and enhanced interfacial adhesion. A simple one-step melt blending has demonstrated to be more efficient in producing a better compatibilized PA6/PPE blend than a two-step sequential blending. The mechanical property improvement of the compatibilized blend over the uncompatibilized counterpart is very drastic, by considering the addition of a very small amount, a few fractions of 1%, of this epoxy coupling agent. © 1998 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 36: 1805–1819, 1998     

Characteristics of the hydrogen ion-sensitive field effect transistors with sol-gel-derived lead titanate gate

The sol-gel-derived lead titanate (PbTiO₃) membrane has been successfully applied as a pH sensitive layer to form the PbTiO₃ gate ion-sensitive field-effect transistor (ISFET). There exhibit the excellent quasi-Nernstian response of 56-59 mV pH⁻¹, good surface adsorption and anticorrosion characteristics via the C-V measurement of the EIS structure. At a specific pH concentration, the output and transfer characteristics are very similar to the behaviours of MOSFETs, and the ISFET model can be derived by the modified MOSFET model. As it operated in the nonsaturation region, there exhibits a linear pH response of about 56-59 mV pH⁻¹. On the other hand, as it operated in the saturation region, the pH response and linearity can be controlled by adjusting the V_GS values, e.g. the pH responses of −4.2, −24.8 and −31.3 μA pH⁻¹ and the correlation coefficients of 0.9491, 0.9995 and 0.9996 at V_GS=1, 3 and 5 V can be obtained, respectively. Besides, in order to get the best pH response and the minimized leakage current, the heat treatment temperature of the PbTiO₃ membrane must be limited between 350 and 450 °C.     

Synthesis, characterization and thermal properties of novel epoxy containing silicon and phosphorus nanocomposites by sol-gel method

Organic-inorganic hybrids were prepared using diglycidyl ether of bisphenol A (DGEBA) type epoxy and tetraethoxysilane via the sol-gel process. The DGEBA type epoxy was modified by a coupling agent to improve the compatibility of the organic and inorganic phases. The sol-gel technique was used successfully to incorporate silicon and phosphorus into the network of hybrids increasing flame retardance.Fourier transform infrared spectroscopy and ²⁹Si nuclear magnetic resonance spectroscopy were used to characterize the structure of the hybrids. In condensed siloxane species for TEOS, silicon atoms through mono-, di-, tri-, and tetra-substituted siloxane bonds are designated as Q¹, Q², Q³, Q⁴, respectively. For 3-isocyanatopropyltriethoxysilane and diethylphosphatoethyltriethoxysilane, mono-, di-, tri-, tetra-substituted siloxane bonds are designated as T¹, T², T³. Results revealed that Q⁴, Q³, T³ are the major environments forming a network structure. The morphology of the ceramer was examined by scanning electron microscopy and Si mapping. Particle sizes were below 100 nm. The hybrids were nanocomposites. The char yield of pure epoxy resin was 14.8 wt.% and that of modified epoxy nanocomposite was 31 wt.% at 800 °C. A higher char yield enhances the flame retardance. Values of limiting oxygen index of pure epoxy and modified epoxy nanocomposites are 24 and 32, respectively, indicating that modified epoxy nanocomposites possess better flame retardance than the pure epoxy resin.     

Synthesis of C60-diphenylaminofluorene dyad with large 2PA cross-sections and efficient intramolecular two-photon energy transfer

The first, highly two-photon active C60 derivative comprised of a A-sp3-D conjugate structure was synthesized showing effective two-photon absorption cross-sections (sigma 2' = 196 x 10(-48) cm4 sec-1 molecule-1) in the nanosecond regime among the best values for diphenylaminofluorene-based AFX chromophores.     

Simultaneous determination of selenium and antimony compounds by capillary electrophoresis with indirect fluorescence detection

Capillary electrophoresis (CE) with indirect fluorescence detection was used to analyze selenium (selenite, selenate, selenomethionine, and selenocystine) and antimony (antimonite and antimonate) compounds. The separation was achieved by CE in 6 min with a 1.2 mM fluorescein solution at pH 9.5. Fluorescein also functioned as a background fluorophore for the indirect detection of these nonfluorescent species. Linearity of more than two orders of magnitude was generally obtained. Precision of migration times and peak areas was less than 1.0% and 7.2%, respectively. The concentration limits of detection (CLODs) was in the microM range. The detection sensitivity was generally dependent upon the transfer ratio (TR, defined as the number of moles of fluorescein ions displaced by one mole of analyte ions) of each species.     

Unsymmetrical linear pentanuclear nickel string complexes: [Ni(5)(tpda)(4)(H(2)O)(BF(4))](BF(4))(2) and [Ni(5)(tpda)(4)(SO(3)CF(3))(2)](SO(3)CF(3))

The one-electron oxidized linear pentanuclear nickel complexes [Ni(5)(tpda)(4)(H(2)O)(BF(4))](BF(4))(2) (1) and [Ni(5)(tpda)(4)(SO(3)CF(3))(2)](SO(3)CF(3)) (2) have been synthesized by reacting the neutral compound [Ni(5)(tpda)(4)Cl(2)] with the corresponding silver salts. These compounds have been characterized by various spectroscopic techniques. Compound 1 crystallizes in the monoclinic space group P2(1)/n with a = 15.3022(1) A, b = 31.0705(3) A, c = 15.8109(2) A, beta = 92.2425(4) degrees, V = 7511.49(13) A(3), Z = 4, and compound 2 crystallizes in the monoclinic space group C2/c with a = 42.1894(7) A, b = 17.0770(3) A, c = 21.2117(4) A, beta = 102.5688(8) degrees, V = 14916.1(5) A(3), Z = 8. X-ray structural studies reveal an unsymmetrical Ni(5) unit for both compounds 1 and 2. Compounds 1 and 2 show stronger Ni-Ni interactions as compared to those of the neutral compounds.