Defects in ZnO nanorods prepared by a hydrothermal method

ZnO nanorod arrays were fabricated using a hydrothermal method. The nanorods were studied by scanning electron microscopy, photoluminescence (PL), time-resolved PL, X-ray photoelectron spectroscopy, and positron annihilation spectroscopy before and after annealing in different environments and at different temperatures. Annealing atmosphere and temperature had significant effects on the PL spectrum, while in all cases the positron diffusion length and PL decay times were increased. We found that, while the defect emission can be significantly reduced by annealing at 200 degrees C, the rods still have large defect concentrations as confirmed by their low positron diffusion length and short PL decay time constants.     

Comparison between mathematical modeling and experimental identification of a spatial slider–crank mechanism

In this paper, Hamilton’s principle, Lagrange multiplier, geometric constraints, partitioning method and Baumgarte stabilization method (BSM) are employed to derive the dynamic equations of a spatial slider–crank mechanism that is driven by a servomotor. The formulation considers the effects of links masses, external forces and motor electric inputs. Comparing dynamic responses between the experimental results and numerical simulations, dynamic modeling gives a wonderful interpretation for the spatial slider–crank mechanism. In this paper, a new identification method based on real-coded genetic algorithm (RGA) is presented to identify the parameters of a spatial slider–crank mechanism. The method promotes the calculation efficiency very much, and is calculated by real-code without the operations of encoding and decoding. The results of numerical simulations and experimental results prove that the identification method is feasible. The contributions of this paper are that the comparison of mathematical modeling and identification between numerical simulations and experimental results are all realized.     

Morphology and deformation of melt-spun polyethylene fibers

Studies have been conducted on the melt-spinning and tensile properties of polyethylene fibers. The process whereby a filament of molten polyethylene is converted into a fiber has been noted to occur within an identifiable constriction zone. It has been inferred that this constriction zone results from a mechanical instability caused by different viscous compliances in fiber exterior and interior. This difference makes the skin move faster than the core and creates a flow field that produces a stress-crystallized morphology in the final melt-spun fibers. Birefringence studies on transverse thin sections suggest that the chains are tilted with respect to the fiber axis at an angle which varies with radius but is axially symmetric. Elastic strain in these fibers results largely from cooperative bending and bowing of lamellae. Plastic deformation beyond the yield point appears chiefly to be derived from lamellar tilting in combination with the formation of microfibrillar crystallites.     

A series of fluorenone-carbazole based regioisomers as bipolar host materials for efficient organic light emitting diodes

A series of fluorenone-carbazole based regioisomers (1–4) have been synthesized and applied as host materials for red OLEDs to investigate the effect of different connection configuration on the optoelectronic properties, charge transport capability and device performance. The optoelectronic properties, thermal stability, redox behaviors and charge transport characteristics of these four compounds were fully characterized. These four hosts demonstrated high thermal stability, bipolar charge transport properties and good EL performance. Although these four compounds demonstrated similar HOMO and LUMO energy levels, the twisted structure of 1 led to the smallest singlet-triplet energy gap, which could account in part for the observation of its better EL performance.     

Probing noise in flux qubits via macroscopic resonant tunneling

Macroscopic resonant tunneling between the two lowest lying states of a bistable rf SQUID is used to characterize noise in a flux qubit. Measurements of the incoherent decay rate as a function of flux bias revealed a Gaussian-shaped profile that is not peaked at the resonance point but is shifted to a bias at which the initial well is higher than the target well. The rms amplitude of the noise, which is proportional to the dephasing rate 1/tauphi, was observed to be weakly dependent on temperature below 70 mK. Analysis of these results indicates that the dominant source of low energy flux noise in this device is a quantum mechanical environment in thermal equilibrium.     

Efficient acid catalytic synthesis of pyrazolopyrimidines from 1H-pyrazol-5-yl-N,N-dimethylformamidines with cyanamide

The efficient acid catalytic synthesis of pyrazolo [3,4-d]pyrimidine was developed by treating 1H-pyrazol-5-yl-N,N-dimethylformamidine with various aminating agents including N,O-bis(trimethylsilyl)hydroxylamine (NHSiMe₃(OSiMe₃)), cyanamide (NH₂CN), hydroxylamine (NH₂OH), methoxyamine (NH₂OMe), hydrazine (NH₂NH₂), and urea (NH₂C(O)NH₂) in acidic solution at reflux. Based on the experimental result, cyanamide (NH₂CN) and methanesulfonic acid were indicated the best aminating agent and acid mediated solvent. On the other hands, the reactivity tendency was involved the activity of original leaving species grafting on the aminating agents, such as –OH, –OMe, –OSiMe₃, –NH₂, –OSiMe₃, –C(O)NH₂, and –CN, in acid catalytic heterocyclic reaction.     

Conductivity and FTIR studies on PEO-LiX [X: CF3SO3(-), SO4(2-)] polymer electrolytes

Polymer electrolytes based on poly(ethylene oxide)-lithium triflate (PEO-LiCF3SO3) and poly(ethylene oxide)-lithium sulphate (PEO-Li2S4) were prepared by using solution casting method. Measurements of conductivity and dielectric were carried out on these films as a function of frequency at various temperatures. It was observed that PEO-LiCF3SO3 polymer electrolytes have higher conductivity. The interaction between PEO and Li salts were studied by Fourier transform infrared (FTIR).     

Determination of gaseous and particulate carbonyls in air by gradient-elution micellar electrokinetic capillary chromatography

A new continuous-flow gradient-elution micellar electrokinetic capillary chromatography method is developed for the determination of airborne carbonyls after derivatization with 2,4-dinitrophenylhydrazine. A total of 16 carbonyls can be determined with detection limits ranging from 0.94 to 8.50 mg/L, working range from 4.72 to 346 mg/L, and repeatabilities (relative standard deviation, n=5) from 1.23 to 4.6% or 3.93 to 7.6% for migration time and peak area, respectively. Coupling with denuder-filter sampling, a preliminary survey has been conducted to determine gaseous and particulate carbonyls from air sampled at a roadside station. The method is shown to have sufficient sensitivity for 1-h sampling of ambient carbonyls with detection limits ranging from 0.045 to 1.2 microg/m3 and working range from 0.11 to 43.3 microg/m3 at a flow rate of 10 Lpm. The method requires minimal modification of commercially available capillary electrophoresis equipment and can differentiate gaseous and particulate carbonyls to provide essential information and objective data for adopting effective measures to combat the discharge of carbonyl compounds to the atmosphere.     

Microchip capillary electrophoresis for frontal analysis of free bilirubin and study of its interaction with human serum albumin

To meet the need for bedside monitoring of free bilirubin for neonates under critical conditions, a microfluidic chip was fabricated and tested for its coupling with CE/frontal analysis (FA) to determine free bilirubin and study of its binding interaction with HSA, which regulated its concentration in plasma. The poly(methyl methacrylate) (PMMA) multichannel chip was fabricated by CO2 laser ablation and bonded with a fused-silica separation capillary for CE/FA separation with UV detection. The chip was designed to allow a complete assay of four electrophoretic runs using preconditioned channels to speed up the determination of free bilirubin and to deliver quick results for bedside monitoring. Under optimized conditions, the linear working range for free bilirubin was from 10 to 200 micromol with RSDs from 2.1 to 5.0% for n=3, and the LOD at 9 micromol for S/N=3. From a binding study between bilirubin and HSA under FA condition, the second binding constant for bilirubin-HSA was determined as 1.07x10(5) L/mol and the number of binding sites per HSA as 3.46. The results enabled the calculation of free bilirubin for jaundiced infants based on the clinically significant level of total bilirubin, producing a range of 118.3-119.4 micromol/L. The developed method is shown to meet the clinical requirement with additional margin of protection to detect the early rising level of free bilirubin prior to jaundice condition. The low-cost microchip CE/FA device is shown to produce quick results with high potential to deliver a suitable bed-side monitoring method for bilirubin management in neonates.     

Bifurcating fragmentation behavior of gas-phase tryptic peptide dications in collisional activation

Collision-activated dissociation (CAD) of tryptic peptides is a cornerstone of mass spectrometry-based proteomics research. Principal component analysis of a database containing 15,000 high-resolution CAD mass spectra of gas-phase tryptic peptide dications revealed that they fall into two classes with a good separation between the classes. The main factor determining the class identity is the relative abundance of the peptide bond cleavage after the first two N-terminal residues. A possible scenario explaining this bifurcation involves trans- to cis-isomerization of the N-terminal peptide bond, which facilitates solvation of the N-terminal charge on the second backbone amide and formation of stable b(2) ions in the form of protonated diketopiperazines. Evidence supporting this scenario is derived from statistical analysis of the high-resolution CAD MS/MS database. It includes the observation of the strong deficit of a(3) ions and anomalous amino acid preferences for b(2) ion formation.