Effects of Roxadustat on Erythropoietin Production in the Rat Body

Anemia is a major complication of chronic renal failure. To treat this anemia, prolylhydroxylase domain enzyme (PHD) inhibitors as well as erythropoiesis-stimulating agents (ESAs) have been used. Although PHD inhibitors rapidly stimulate erythropoietin (Epo) production, the precise sites of Epo production following the administration of these drugs have not been identified. We developed a novel method for the detection of the Epo protein that employs deglycosylation-coupled Western blotting. With protein deglycosylation, tissue Epo contents can be quantified over an extremely wide range. Using this method, we examined the effects of the PHD inhibitor, Roxadustat (ROX), and severe hypoxia on Epo production in various tissues in rats. We observed that ROX increased Epo mRNA expression in both the kidneys and liver. However, Epo protein was detected in the kidneys but not in the liver. Epo protein was also detected in the salivary glands, spleen, epididymis and ovaries. However, both PHD inhibitors (ROX) and severe hypoxia increased the Epo protein abundance only in the kidneys. These data show that, while Epo is produced in many tissues, PHD inhibitors as well as severe hypoxia regulate Epo production only in the kidneys.     

New Temperature Control Apparatus for X-ray Experiments

A temperature control apparatus for X-ray experiments for organic compounds was newly designed. It is a gas furnace system equipped with a proportional integrated differential (PID) controller. In this study, a position sensitive proportional counter (PSPC) was used as a detector in order to make quick measurements. Using this apparatus, the long spacing of 1-octadecanol was measured by the small angle X-ray scattering (SAXS) method. The long spacings of 1-octadecanol in the high temperature phase and the low temperature stable one were 48.7 and 41.7 Å, respectively. The result obtained was consistent with that reported. It was confirmed that the apparatus designed here operated properly for the temperature control of organic compounds in X-ray experiments and was useful for the structural study on the phase transition of organic samples.     

Assessing the biocompatibility of NiTi shape memory alloys used for medical applications

The present paper reviews aspects related to the biocompatibility of NiTi shape memory alloys used for medical applications. These smart metallic materials, which are characterised by outstanding mechanical properties, have been gaining increasing importance over the last two decades in many minimal invasive surgery and diagnostic applications, as well as for other uses, such as in orthodontic appliances. Due to the presence of high amounts of Ni, the cytotoxicity of such alloys is under scrutiny. In this review paper we analyse work published on the biocompatibility of NiTi alloys, considering aspects related to: (1) corrosion properties and the different methods used to test them, as well as specimen surface states; (2) biocompatibility tests in vitro and in vivo; (3) the release of Ni ions. It is shown that NiTi shape memory alloys are generally characterised by good corrosion properties, in most cases superior to those of conventional stainless steel or Co–Cr–Mo-based biomedical materials. The majority of biocompatibility studies suggest that these alloys have low cytotoxicity (both in vitro and in vivo) as well as low genotoxicity. The release of Ni ions depends on the surface state and the surface chemistry. Smooth surfaces with well-controlled structures and chemistries of the outermost protective TiO₂ layer lead to negligible release of Ni ions, with concentrations below the normal human daily intake.     

Passive sampling and/or extraction techniques in environmental analysis: a review

The current state-of-the-art of passive sampling and/or extraction methods for long-term monitoring of pollutants in different environmental compartments is discussed in this review. Passive dosimeters that have been successfully used to monitor organic and inorganic contaminants in air, water, sediments, and soil are presented. The application of new approaches to the determination of pollutants at the sampling stage is discussed. The main milestones in the development of passive techniques for sampling and/or extraction of analytes, and in biomonitors used in environmental analysis, are summarized in this review. Passive samplers and biomonitors are compared.     

Kinetic Modeling of the Decomposition of Carbon Tetrachloride in Thermal Plasma

Decomposition of carbon tetrachloride in a RF thermal plasma reactor was investigated in argon atmosphere. The net conversion of CCl₄ and the main products of its decomposition were determined from the mass spectrometric analysis of outlet gases. Flow and temperature profiles in the reactor were calculated and concentration profiles of the species along the axis of the reactor were estimated using a newly developed chemical kinetic mechanism, containing 12 species and 34 reaction steps. The simulations indicated that all carbon tetrachloride decomposed within a few microseconds. However, CCl₄ was partly recombined from its decomposition products. The calculations predicted 70\% net conversion of CCl₄, which was close to the experimentally determined value of 60\%. A thermodynamic equilibrium model also simulated the decomposition. Results of the kinetic and thermodynamic simulations agreed well above 2000 K. However, below 2000 K the thermodynamic equilibrium model gave wrong predictions. Therefore, application of detailed kinetic mechanisms is recommended for modeling CCl₄ decomposition under thermal plasma conditions.     

Preparation of Tin Oxide-Based Metal Oxide Particles

Tin oxide-doped hybrid particles were prepared by a wet chemical process with organic-inorganic (phenyl/silica) hybrid particles in an alcoholic solution. The phenyl/silica hybrid particles, with a diameter of ca. 790 nm were used as a new support material for tin oxide (SnO₂) particles from tin(IV) chloride. The surface of the particles was modified via nitration of aromatic groups in the particles, to promote formation of the tin oxide coating on the particles. The thickness and surface morphology of the tin oxide layer coated on the nitrated-phenyl/silica hybrid particles could be controlled by varying the tin(IV) chloride concentration and reaction time. The size and morphology of the resultant particles were investigated with field emission scanning electron microscopy (FE-SEM) and transmission electron microscopy (TEM). The particles obtained were also characterised by infrared (FTIR) and solid-state ¹³C magic angle spinning nuclear magnetic resonance (¹³C-CP/MAS NMR) spectroscopy. The effect of processing parameters on the crystallinity and structure of the doped hybrids were confirmed by X-ray diffraction (XRD) patterns.     

Use of solid-phase extraction to enable enhanced detection of acyl homoserine lactones (AHLs) in environmental samples

A challenge for understanding the role of bacterial cell–cell signalling in the environment is the detection of those signals, which are often present in low (nmol L⁻¹) concentrations. We describe here a simple purification method, solid-phase extraction (SPE), for increasing the sensitivity of detection for one such group of signals, acyl homoserine lactones (AHLs), in environmental samples. Spiking of dried marine sponge tissue (Stylinos sp.) with AHLs resulted in detection down to 0.01 ppm for 3-oxo-hexanoyl homoserine lactone (3-oxo C₆-HSL) and 1 ppm for hexanoyl homoserine lactone (C₆-HSL). Compared with liquid extraction methods use of SPE resulted in twofold and tenfold improvements in sensitivity, respectively.     

Microwave-assisted acid hydrolysis of proteins combined with liquid chromatography MALDI MS/MS for protein identification

Simple and efficient digestion of proteins, particularly hydrophobic membrane proteins, is of significance for comprehensive proteome analysis using the bottom-up approach. We report a microwave-assisted acid hydrolysis (MAAH) method for rapid protein degradation for peptide mass mapping and tandem mass spectrometric analysis of peptides for protein identification. It uses 25% trifluoroacetic acid (TFA) aqueous solution to dissolve or suspend proteins, followed by microwave irradiation for 10 min. This detergent-free method generates peptide mixtures that can be directly analyzed by liquid chromatography (LC) matrix-assisted laser desorption ionization (MALDI) mass spectrometry (MS) without the need of extensive sample cleanup. LC-MALDI MS/MS analysis of the hydrolysate from 5 microg of a model transmembrane protein, bacteriorhodopsin, resulted in almost complete sequence coverage by the peptides detected, including the identification of two posttranslational modification sites. Cleavage of peptide bonds inside all seven transmembrane domains took place, generating peptides of sizes amenable to MS/MS to determine possible sequence errors or modifications within these domains. Cleavage specificity, such as glycine residue cleavage, was observed. Terminal peptides were found to be present in relatively high abundance in the hydrolysate, particularly when low concentrations of proteins were used for MAAH. It was shown that these peptides could still be detected from MAAH of bacteriorhodopsin at a protein concentration of 1 ng/microl or 37 fmol/microl. To evaluate the general applicability of this method, it was applied to identify proteins from a membrane protein enriched fraction of cell lysates of human breast cancer cell line MCF7. With one-dimensional LC-MALDI MS/MS, a total of 119 proteins, including 41 membrane-associated or membrane proteins containing one to 12 transmembrane domains, were identified by MS/MS database searching based on matches of at least two peptides to a protein.     

Analysis of inorganic mercury species associated with airborne particulate matter/aerosols: method development

This paper describes a method for speciation of Hg associated with airborne particulate matter. This method uses a mini-sampler for sample collection and analysis, thermal desorption for separating Hg species, and inductively coupled plasma mass spectrometry (ICP–MS) for identification and quantification of Hg. Coal fly ash spiked with different Hg compounds (e.g. Hg⁰, HgCl₂, HgO, and HgS) was used for qualitative calibration. A standard reference material with a certified value for Hg concentration was used to evaluate the method. When the temperature of the furnace was programmed at a linear rate of increase of 50° min^–1, different Hg compounds could clearly be separated. Three airborne particulate matter samples were collected in parallel in Toronto, ON, Canada and analyzed using this method. Reproducible results were obtained and Hg⁰, HgCl₂, HgO, and HgS species from these samples were detected.