Light attenuation in a semitransparent foam sheet-Thickness measurement for industrial use

An optical method for measuring the thickness of heterogeneous materials has been studied. The method is based on the light attenuation theory. A complete system has been constructed in order to demonstrate the applicability of the present method for industrial use. The experimental set-up consists of semiconductor lasers, focusing lenses, photo-diodes serving as a power meter and a personal computer with an A/D converter for data acquisition. Averaging of numerous measurements is required in the present method because the heterogeneous cell structure of the foam material yields large fluctuations in transmitted light levels. The fluctuations can be reduced to below 1% of the transmitted light power by 80 times averaging. The error of the measurement is considered to be a few tens of micrometers in thickness. The present system is capable of sampling data at a rate of 400 Hz and has been successfully applied to a manufacturing process.     

QUANTUM EFFICIENCY FOR THE PHOTOCONVERSION OF BACTERIORHODOPSIN AT VERY LOW TEMPERATURES

Abstract— Quantum efficiencies for photoconversion of bacteriorhodopsin (trans-bR) to a bathochromic product (batho-bR^t) and its photoreversion in purple membrane at 77 and 9 K were investigated with low temperature spectrophotometry. The kinetics of the photoconversion and its photoreversion cannot be expressed by a single exponential curve. The photoconversions at 77 and 9 K showed the same slope in the early stage. The kinetics of the photoreversions were identical at the two temperatures. These results indicate that the quantum efficiencies for the conversion of trans-bR to batho-bR^t or for its photoreversion are identical at the two temperatures.
The fact that the photoreversion cannot be expressed by a single exponential curve suggests the existence of several conformational states of batho-bR^t due to the trimer structure of the purple membrane.     

Semi-stable curves on algebraic surfaces and logarithmic pluricanonical maps

Mathematische Annalen -     

Enrichment of surfactant from its aqueous solution using ultrasonic atomization

Dilute aqueous solutions of dodecyl-benzenesulfonic acid sodium salt (DBS-Na) and polyoxyethylenenonylphenyl ethers (PONPEs) were ultrasonically atomized. The surfactants were concentrated in collected mist droplets. The enrichment ratio increased with decreasing surfactant concentration. Depending on the surfactant’s molecular weight and affinity to water, different enrichment ratio was observed in the range of low feed concentrations. For anionic surfactant, DBS-Na, the enrichment ratio was significantly improved by KCl addition and a peak appeared on the plot of the ratio against KCl concentration. Addition of NaCl or CaCl₂ · 2H₂O to the surfactant solution also enhanced the enrichment ratio; however, the effect was relatively small. Such behaviors of the ratio were interpreted as enhanced interfacial adsorption of the surfactant and a lack of supply of surfactant monomers from liquid bulk because of slow breaking of surfactant micelles. Time required for collecting an amount of mist was also observed. Among the three salt systems, the time for KCl system was twice as long as others. This fact suggested that the formation of smaller droplets in KCl system.     

A new ent-clerodane diterpene from the aerial parts of Baccharis gaudichaudiana

A new ent-clerodane diterpene, named bacchariol (1) was isolated from the aerial parts of Baccharis gaudichaudiana DC. (Compositae), together with known ent-clerodane diterpenes (2, 3), eight known flavonoids (4-11) and 3, 5-dicaffeoylquinic acid (12). Their structures were determined by spectroscopic analyses. Flavonoids (7, 8, 11) and 12 showed moderate scavenging activities toward 1, 1-diphenyl-2-picrylhydrazyl (DPPH) radicals.     

Scale-up study of high osmotic pressure chromatography for separation of poly(epsilon-caprolactone)

Methods to prepare fractions of poly(epsilon-caprolactone) with a narrow molecular mass distribution in large quantities have been examined using high osmotic pressure chromatography under the theta condition. Effects of column dimension and coupling columns in series on the separation resolution were studied. We found that use of a thicker column can improve the resolution if adverse effects of viscous fingering are avoided. We also demonstrated that coupling the columns results in a better separation if the second column does not adsorb high-molecular-mass components purified in the first column.     

Spontaneous alternating copolymerization of isobutoxyallene with 4-phenyl-1,2,4-triazoline-3,5-dione

The spontaneous copolymerization of isobutoxyallene ( 1 ) with 4-phenyl-1,2,4-triazoline-3,5-dione ( 2 ) was carried out to afford a copolymer with a number-average molecular weight of 5900–10,300. The copolymer consisted of a 2,3-polymerization unit of 1 and a  NN polymerization unit of 2 , maintaining an alternating character regardless of the monomer feed ratio. The corresponding copolymerization of 1 with 2 in the presence of methanol afforded the adduct of the compounds without the polymer, indicating the generation of a zwitterion of 1 and 2 . © 2001 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 1564–1571, 2001