Synthesis and characterisation of p-diethylaminomethylthiacalix[4]arene for selective recovery of platinum from automotive catalyst residue

The ability of chloroform solutions of p-diethylaminomethylthiacalix[4]arene 1 to extract platinum from HCl media was tested. As an ion-pair extractant, compound 1 had the highest platinum extraction ability among all the thiacalix[n]arene derivatives tested in this study. Compound 1 was a highly specific extractant for Pt(IV) ions from single-metal solutions and platinum-group metal solutions from automotive catalyst residue. Various conditions such as contact time, pH, concentration of 1, effect of chloride ions, effect of acidity and Pt(IV) concentration were studied. The distribution ratio of platinum ions (D) was calculated. The platinum complex stoichiometry ratio was obtained using slope analysis. The 1–Pt(IV) complex was characterised using X-ray photoelectron spectroscopy, FT-IR and ¹H NMR. Finally, the Pt(IV) extraction percentage of compound 1 was compared with that of previously reported thiacalix[n]arene-based extractants.     

Syntheses of β-amidovinyltellurides and oxazoles by addition reactions of alkynes with benzenetellurinyl trifluoromethanesulfonate in acetonitrile

Benzenetellurinyl trifluoromethanesulfonate in conjunction with acetonitrile readily effected amidotellurinylation reactions with alkynes. Most of the addition reactions proceeded in a trans fashion to form the (E)-β-acetamidovinyl phenyl telluroxides. Subsequently, it was found that the prevailing Markovnikov adducts from terminal alkynes immediately isomerized to (Z)-isomers which were isolated as the corresponding vinyltellurides. On the other hand, the adducts derived from internal alkynes thermally underwent a spontaneous intramolecular cyclization to be transformed eventually into oxazoles.     

Synthesis and radical ring-opening polymerization behavior of vinylcyclopropane bearing six-membered cyclic acetal moiety

Synthesis and radical ring-opening polymerization of vinylcyclopropane bearing six-membered cyclic acetal moiety, 1-vinyl-4,8-dioxaspiro[2.5]octane (1), were carried out. 1 was prepared by the reaction of 1,1-dichloro-2-vinylcyclopropane and 1,3-propanediol in DMF in the presence of a base. Radical polymerization of 1 was carried out in the presence of an appropriate initiator (3 mol % vs. 1) at 60 and 120°C in degassed sealed ampoules for 20 h. A colorless transparent viscous polymer was obtained by the isolation with preparative HPLC. The structure of poly(1) was determined to consist of two 1,5-ring-opened units and a unit bearing no olefinic moiety. The difference of the activation energies for the ring-opening reaction of the cyclopropane ring calculated by the molecular orbital method could explain the selectivity in the direction of the cleavage of the cyclopropane ring. Acid hydrolysis of poly(1) afforded the corresponding polyketone in quantitative conversion. © 1996 John Wiley & Sons, Inc.     

Syntheses and radical polymerizations of novel optically active vinyl and isopropenyl carbamates having L-leucine structures

Syntheses and radical polymerizations of vinyl and isopropenyl carbamates having L -leucine methyl ester structures, N-vinyloxycarbonyl-L -leucine methyl ester (VOC-L-M) and N-isopropenyloxycarbonyl-L -leucine methyl ester (IOC-L-M), were carried out. VOC-L-M and IOC-L-M were prepared by the reactions of L -leucine methyl ester with vinyl and isopropenyl chloroformates in the presence of sodium hydrogen carbonate. The radical polymerization of VOC-L-M with AIBN (1 mol %) in bulk, chlorobenzene, methanol, and N,N-dimethylformamide afforded the corresponding polymer (poly(VOC-L-M)) with M _n 7,400–19,000. Meanwhile, IOC-L-M afforded no polymer with AIBN at 60°C but afforded a polymer having low molecular weight with BPO at 80°C. The glass transition temperatures of poly(VOC-L-M) and poly(IOC-L-M) were 53 and 65°C, respectively. The 10% weight loss temperatures of poly(VOC-L-M) and poly(IOC-L-M) under nitrogen were 255 and 173, respectively. The copolymerization parameters of VOC-L-M (M₁) and vinyl acetate (M₂) were evaluated as r₁ = 0.92 and r₂ = 0.63. © 1996 John Wiley & Sons, Inc.     

Reactions of 2-Pyridyl Substituted Phosphine Oxides and Phosphonium Salts with Organometallic Reagents and in Aqueous Media

Phosphine oxides bearing two or three 2-pyridyl groups react with organometallic reagents affording 2,2′-bipyridyl, 2-substituted pyridines and pyridine in good yields. Phosphonium salts and phosphine oxides, bearing at least two 2-pyridyl or substituted 2-pyridyl groups also give the corresponding 2,2′-bipyridyls and pyridines upon treatment with acid or neutral solvents such as water and alcohols in substantial yields. The 2,2′-bipyridyls are considered to be formed by ligand coupling within the pentacoordinated phosphorus intermediate formed incipiently during the reaction.     

A sensitive and selective determination method of histamine by HPLC with intramolecular excimer-forming derivatization and fluorescence detection

A highly sensitive, selective and simple method is described for the determination of histamine by high-performance liquid chromatography (HPLC) with fluorescence detection. The method is based on an intramolecular excimer-forming fluorescence derivatization of histamine with 4-(1-pyrene)butyric acid N-hydroxysuccinimide ester (PSE), followed by reversed-phase HPLC. Histamine, having two amino moieties in a molecule, was converted to the dipyrene-labeled derivative by reaction with PSE. The derivative afforded intramolecular excimer fluorescence (450-540 nm), which can clearly be discriminated from the monomer fluorescence (370-420 nm) emitted from PSE. Typically, a 10 micro L sample solution was mixed with 100 micro L of derivatization reagent solution, which was a mixture of 0.5 mm PSE in acetonitrile and 0.5 mm potassium carbonate in water (8:2, v/v). The derivatization was carried out at 100 degrees C for 90 min. The PSE derivative of histamine could be separated by reversed-phase ODS column with isocratic elution using acetonitrile:water (82:18, v/v) containing 0.03% triethylamine. The detection limit (singnal-to-noise ratio = 3) of histamine was 0.5 fmol for a 30 micro L injection. The method was successfully applied to the determination of histamine in human urine, and had enough selectivity and sensitivity for urinary histamine quantification.     

Permselective monolayer membrane based on two-dimensional cross-linked polysiloxane LB films for hydrogen peroxide detecting glucose sensors

Novel two-dimensional (2D) cross-linked polysiloxane LB films were prepared and applied for glucose sensing as H2O2-permselective films in order to block other electroactive interferences, such as L-ascorbic acid, L-cysteine, uric acid and acetaminophen; the 2D cross-linked polysiloxane monolayers were remarkably effective in eliminating interfering responses and had a rapid response for glucose, even though the films were only a monolayer thick.     

Mechanochemistry and co-crystal formation: effect of solvent on reaction kinetics

We demonstrate that significant improvements in kinetics of co-crystal formation by grinding can be achieved by the addition of minor amounts of appropriate solvent.     

Controlled monomer insertion into polymer main chain: synthesis of sequence ordered polystyrene containing thiourethane and trithiocarbonate units by the RAFT process

A polymer having a trithiocarbonate moiety in the main chain was applied as a polymeric precursor to the synthesis of a sequence ordered polymer by insertion polymerization of styrene into the main chain by a RAFT mechanism.