Coupled whispering gallery modes in a multilayer-coated microsphere

Whispering gallery modes in a microsphere coated with three layers of high, low, and high refractive indices (RIs) are considered. Coastal modes and inland modes, centered on the outer and inner high-RI layers, exist as different radial modes. At right values of RI and thickness of the three layers, an inland mode and a coastal mode couple to produce a radial distribution of the photonic field that resembles bonding and antibonding orbitals. The coupling occurs across a layer of the middle low-RI layer, much thicker than the wavelength of light. The coupling is analyzed in a quantum-mechanical analog of a one-dimensional particle in a double-well potential.     

Synthesis and crosslinking reaction of a novel polymer containing benzoxazine and phenyleneethynylene moieties in the main chain

A novel polymer, poly( 1 ) containing benzoxazine and phenyleneethynylene moieties in the main chain with number‐average molecular weights ranging from 1400 to 9800 was obtained quantitatively by the Sonogashira–Hagihara coupling polymerization of the corresponding iodophenyl‐ and ethynylphenyl‐substituted monomer 1 . Poly( 1 ) was heated at 200 °C under N₂ for 2 h to obtain the cured polymer, poly( 1 )′ via the ring‐opening polymerization of the benzoxazine moieties. The structures of the polymer before and after curing were confirmed by ¹H‐NMR, IR, and UV–vis absorption and reflectance spectroscopies. Poly( 1 )′ was thermally more stable than monomer 1 and poly( 1 ). A specimen was prepared from a mixture of poly( 1 ) and phenol‐diaminodiphenylmethane type benzoxazine 2 by heating at 200 °C for 2 h under N₂. The poly( 1 )/ 2 resin was thermally stable than bisphenol‐A type benzoxazine resin 3 . Poly( 1 ) exhibited XRD peaks corresponding to the d‐spacings of 1.26–0.98 and 0.40 nm, assignable to the repeating monomer unit and alignment of polymer molecules, respectively. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 2581–2589     

Alkane Shape- and Size-Recognized Selective Vapor Sorption in “Channel-Like” Crystals Based on Thiacalixarene Assemblies

Alkanes composed of C−C and C−H show a low electric polarization, and therefore, there is only very weak interaction between alkanes and adsorbents. Thus, it is difficult to separate a specific alkane from a mixture of alkanes by adsorption. Here, two activated “channel-like” crystals generated from brominated thiacalix[4]arene propyl ethers, which adopt 1,3-alternate and partial cone conformations, recognize specific alkane vapors depending on alkane-shape and -size, sorting in three-type alkane guests such as linear, branched, and cyclic alkanes. Two activated crystals, which are prepared by removal of solvent upon heating under reduced pressure, incorporate branched and/or cyclic alkane vapors by a unique “gate-opening” mechanism via a crystal transformation in the process. Linear alkane vapors do not trigger gate opening and are not taken up by the activated crystals. The shape and size molecular-recognition properties of the activated crystals promises considerable usefulness for the separation of linear, branched, and cyclic alkanes.     

Synchrotron radiation photoelectron spectroscopy and near-edge X-ray absorption fine structure study on oxidative etching of diamond-like carbon films by hyperthermal atomic oxygen

Surface structural changes of a hydrogenated diamond-like carbon (DLC) film exposed to a hyperthermal atomic oxygen beam were investigated by Rutherford backscattering spectroscopy (RBS), synchrotron radiation photoelectron spectroscopy (SR-PES), and near-edge X-ray absorption fine structure (NEXAFS). It was confirmed that the DLC surface was oxidized and etched by high-energy collisions of atomic oxygen. RBS and real-time mass-loss data showed a linear relationship between etching and atomic oxygen fluence. SR-PES data suggested that the oxide layer was restricted to the topmost surface of the DLC film. NEXAFS data were interpreted to mean that the sp² structure at the DLC surface was selectively etched by collisions with hyperthermal atomic oxygen, and an sp³-rich region remained at the topmost DLC surface. The formation of an sp³-rich layer at the DLC surface led to surface roughening and a reduced erosion yield relative to the pristine DLC surface.     

Measurement on Spot Size Dependence of Dense WDM Dielectric Multilayer Filters

We present the spot size dependence of dielectric multilayer filters for use in dense WDM systems. We found large dependences of filter performances on the spot size and the incident angle of input light, which should be important for miniaturizing multi-channel add/drop filters.     

Identification of conjugation positions of urinary glucuronidated vitamin D3 metabolites by LC/ESI–MS/MS after conversion to MS/MS‐fragmentable derivatives

A liquid chromatography/electrospray ionization–tandem mass spectrometry‐based method was developed for the identification of the conjugation positions of the monoglucuronides of 25‐hydroxyvitamin D₃ [25(OH)D₃] and 24,25‐dihydroxyvitamin D₃ [24,25(OH)₂D₃] in human urine. The method employed derivatization with 4‐(4‐dimethylaminophenyl)‐1,2,4‐triazoline‐3,5‐dione to convert the glucuronides into fragmentable derivatives, which provided useful product ions for identifying the conjugation positions during the MS/MS. The derivatization also enhanced the assay sensitivity and specificity for urine sample analysis. The positional isomeric monoglucuronides, 25(OH)D₃‐3‐ and ‐25‐glucuronides, or 24,25(OH)₂D₃‐3‐, ‐24‐ and ‐25‐glucuronides, were completely separated from each other under the optimized LC conditions. Using this method, the conjugation positions were successfully determined to be the C3 and C24 positions for the glucuronidated 25(OH)D₃ and 24,25(OH)₂D₃, respectively. The 3‐glucuronide was not present for 24,25(OH)₂D₃, unlike 25(OH)D₃, thus we found that selective glucuronidation occurs at the C24‐hydroxy group for 24,25(OH)₂D₃.     

Physicochemical characterization of tamoxifen citrate pseudopolymorphs, methanolate and ethanolate

Two novel pseudopolymorphs, methanolate and ethanolate of tamoxifen [(Z)-2-[4-(1,2-diphenyl-1-butenyl)phenoxy]-N,N-dimethylethylamine]citrate, were prepared in addition to forms A and B reported previously. Their crystalline forms were identified and characterized by powder and single crystal X-ray diffractometry, differential scanning calorimetry, thermogravimetric analysis, hot-stage microscopy, scanning electron microscopy and diffuse reflectance infrared Fourier-transform spectroscopy, and their physicochemical stability was also evaluated. The results of single crystal X-ray analysis and thermogravimetric analysis of methanolate and ethanolate suggested that the stoichiometry of tamoxifen citrate : methanol and tamoxifen citrate : ethanol could be composed of a 1 : 1 molecular ratio for both solvates. The results of physicochemical stability evaluations at 75 and 97% RH at 40 and 60 degrees C indicated that the metastable form A was quite stable for at least 2 months even under severe storage conditions, whereas methanolate immediately transformed to a crystalline mixture of forms A and B, and subsequently changed to the stable form B.     

PHOTOCHEMICAL REACTION OF 13-CIS-BACTERIORHODOPSIN STUDIED BY LOW TEMPERATURE SPECTROPHOTOMETRY

Abstract— The photoreaction cycle of 13- cis -bacteriorhodopsin (13- cis -bR) was investigated by low temperature spectrophotometry using two different preparations; 13- cis -bR constituted from bacterioopsin and 13- cis -retinal, and dark-adapted bacteriorhodopsin (bR^D), which is an equi-molar mixture of 13- cis -bR and trans -bR.
By irradiation with 500 nm light at — 190°C, 13- cis -bR was converted to its batho-product, batho-13- cis -bR (batho-bR¹³), which is different from batho-product from trans -bR, batho-bR^t. On warming batho-bR¹³ to -5°C in the dark, it completely changed to trans -bR. We estimated the composition of 13- cis -bR and trans -bR in the warmed sample spectrophotometrically and then the absorption spectrum of batho-bR¹³ was calculated. The absorption maximum lies at 608 nm, 1250 cm⁻¹ longer than that of 13- cis -bR; the molar extinction coefficient (ε) is about 74000 M ⁻¹ cm⁻¹, larger than that of 13- cis -bR (52000 M ⁻¹ cm⁻¹).
On the warming the sample containing batho-bR¹³ formed by irradiating 13- cis -bR or bR^D at — 190°C, we could not detect other intermediates such as the lumi- or meta-intermediates seen in trans-bR system.     

Comparison of the equilibrium geometry of acetylene (C2H2) and disilyne (Si2H2)

The equilibrium geometry of disilyne is not linear, but is twisted. The potential surfaces of acetylene and disilyne have a critical internuclear distance between the central atoms, where the stable geometry changes from linear to twisted forms the R-dependence of the valence-shell electron energy causes the difference in the structure of the molecules.     

Use of the MALDI BioTyper system with MALDI–TOF mass spectrometry for rapid identification of microorganisms

In a clinical diagnosis microbiology laboratory, the current method of identifying bacterial isolates is based mainly on phenotypic characteristics, for example growth pattern on different media, colony morphology, Gram stain, and various biochemical reactions. These techniques collectively enable great accuracy in identifying most bacterial isolates, but are costly and time-consuming. In our clinical microbiology laboratory, we prospectively assessed the ability of matrix-assisted laser desorption ionization–time of flight mass spectrometry (MALDI–TOF MS) to identify bacterial strains that were routinely isolated from clinical samples. Bacterial colonies obtained from a total of 468 strains of 92 bacterial species isolated at the Department of Clinical Laboratory at Chiba University were directly placed on target MALDI plates followed by addition of CHCA matrix solution. The plates were then subjected to MALDI–TOF MS measurement and the microorganisms were identified by pattern matching with the libraries in the BioTyper 2.0 software. Identification success at the species and genus levels was 91.7% (429/468) and 97.0% (454/468), respectively. MALDI–TOF MS is a rapid, simple, and high-throughput proteomic technique for identification of a variety of bacterial species. Because colony-to-colony differences and effects of culture duration on the results are minimal, it can be implemented in a conventional laboratory setting. Although for some pathogens, preanalytical processes should be refined, and the current database should be improved to obtain more accurate results, the MALDI–TOF MS based method performs, in general, as well as conventional methods and is a promising technology in clinical laboratories.