A new Zn(II) coordination polymer with 4-pyridylthioacetate: assemblies of homo-chiral helices with sulfide sites

A coordination polymer [Zn(pyta)(OH)] (pyta = 4-pyridylthioacetate), was synthesized and structurally characterized; it is constructed by an alternating assembly of two types of homo-chiral helices, [Zn-OH] and [Zn-pyta], in which the sulfide moieties are fastened in the latter columns.     

Supramolecular assembly based on π-π stacking and π-cation interactions between thiacalix[6]arene and DMF

The molecular assembly of thiacalix[6]arene was formed by π-π stacking and π-DMF interactions between thiacalix[6]arene and adjoining thiacalix[6]arene and between thiacalix[6]arene and DMF, respectively. The X-ray crystal analysis also revealed that hydroxyl groups of thiacalix[6]arene adopted novel two sets of hydrogen bond with two DMF and intramolecular hydrogen bond between phenolic units, which cause to make 1,2,3-alternate configuration structure of thiacalix[6]arene.     

Novel pyridinium salts as cationic thermal and photoinitiators and their photosensitization properties

Novel pyridinium salts [N‐(α‐phenylbenzyl)‐, N‐(1‐naphthylmethyl)‐, or N‐cinnamyl p‐ or o‐cyanopyridinium hexafluoroantimonates] were synthesized by the reaction of p‐ or o‐cyanopyridine and the corresponding bromides followed by anion exchange with KSbF₆. These pyridinium salts polymerized epoxy monomers at lower temperatures than previously reported for N‐benzyl‐2‐cyanopyridinium hexafluoroantimonate. The o‐substituted pyridinium salts showed higher activity than the p‐substituted ones, and the crosslinked epoxy polymers cured with these initiators showed higher glass‐transition temperatures. These pyridinium salts photoinitiated radical polymerization as well as cationic polymerization. The photopolymerization was accelerated by the addition of aromatic ketones as photosensitizers. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 1037–1046, 2002     

PHOTOCHEMICAL REACTION OF 13-CIS-BACTERIORHODOPSIN STUDIED BY LOW TEMPERATURE SPECTROPHOTOMETRY

Abstract— The photoreaction cycle of 13- cis -bacteriorhodopsin (13- cis -bR) was investigated by low temperature spectrophotometry using two different preparations; 13- cis -bR constituted from bacterioopsin and 13- cis -retinal, and dark-adapted bacteriorhodopsin (bR^D), which is an equi-molar mixture of 13- cis -bR and trans -bR.
By irradiation with 500 nm light at — 190°C, 13- cis -bR was converted to its batho-product, batho-13- cis -bR (batho-bR¹³), which is different from batho-product from trans -bR, batho-bR^t. On warming batho-bR¹³ to -5°C in the dark, it completely changed to trans -bR. We estimated the composition of 13- cis -bR and trans -bR in the warmed sample spectrophotometrically and then the absorption spectrum of batho-bR¹³ was calculated. The absorption maximum lies at 608 nm, 1250 cm⁻¹ longer than that of 13- cis -bR; the molar extinction coefficient (ε) is about 74000 M ⁻¹ cm⁻¹, larger than that of 13- cis -bR (52000 M ⁻¹ cm⁻¹).
On the warming the sample containing batho-bR¹³ formed by irradiating 13- cis -bR or bR^D at — 190°C, we could not detect other intermediates such as the lumi- or meta-intermediates seen in trans-bR system.     

Dynamic coordination polymers with 4,4'-oxybis(benzoate): reversible transformations of nano- and nonporous coordination frameworks responding to present solvents

Reversible construction of a nanoporous framework from a nonporous framework has been found in the zinc(II) coordination polymer with 4,4'-oxybis(benzoate) (oba). [Zn(2)(oba)(2)(dmf)(2)].2DMF (1), which has 1 nm scale channels, transforms to the nonporous coordination polymer [Zn(oba)(H(2)O)] (2) with the loss of the open framework. Compound 2 on treatment with DMF reversibly yields nanoporous compound 1.     

Application of DEM modified with enlarged particle model to simulation of bead motion in a bead mill

We applied the discrete element method （DEM） of simulation modified by an enlarged particle model to simulate bead motion in a large bead mill. The stainless-steel bead mill has inner diameter of 102 mm and mill length of 198 mm. The bead diameter and filling ratio were fixed respectively at 0.5 mm and 85%. The agitator rotational speed was changed from 1863 to 3261 rpm. The bead motion was monitored experimentally using a high-speed video camera through a transparent mill body. For the simulation, enlarged particle sizes were set as 3-6 mm in diameter. With the DEM modified by the enlarged particle model, the motion of enlarged particles in a mill was simulated.The velocity data of the simulated enlarged particles were compared with those obtained in the experiment. The simulated velocity of the enlarged particles depends on the virtual frictional coefficient in the DEM model. The optimized value of the virtual frictional coefficient can be determined by considering the accumulated mean value. Results show that the velocity of the enlarged particles simulated increases with an increase in the optimum virtual frictional coefficient, but the simulated velocity agrees well with that determined experimentally by optimizing the virtual frictional coefficient in the simulation. The computing time in the simulation decreases with increased particle size.     

Identification of conjugation positions of urinary glucuronidated vitamin D3 metabolites by LC/ESI–MS/MS after conversion to MS/MS‐fragmentable derivatives

A liquid chromatography/electrospray ionization–tandem mass spectrometry‐based method was developed for the identification of the conjugation positions of the monoglucuronides of 25‐hydroxyvitamin D₃ [25(OH)D₃] and 24,25‐dihydroxyvitamin D₃ [24,25(OH)₂D₃] in human urine. The method employed derivatization with 4‐(4‐dimethylaminophenyl)‐1,2,4‐triazoline‐3,5‐dione to convert the glucuronides into fragmentable derivatives, which provided useful product ions for identifying the conjugation positions during the MS/MS. The derivatization also enhanced the assay sensitivity and specificity for urine sample analysis. The positional isomeric monoglucuronides, 25(OH)D₃‐3‐ and ‐25‐glucuronides, or 24,25(OH)₂D₃‐3‐, ‐24‐ and ‐25‐glucuronides, were completely separated from each other under the optimized LC conditions. Using this method, the conjugation positions were successfully determined to be the C3 and C24 positions for the glucuronidated 25(OH)D₃ and 24,25(OH)₂D₃, respectively. The 3‐glucuronide was not present for 24,25(OH)₂D₃, unlike 25(OH)D₃, thus we found that selective glucuronidation occurs at the C24‐hydroxy group for 24,25(OH)₂D₃.     

Cyclic sample pooling using two‐dimensional liquid chromatography system enhances coverage in shotgun proteomics

We report a cyclic sample pooling technique devised in two‐dimensional liquid chromatography–electrospray ionization mass spectrometry (LC‐ESI‐MS) shotgun proteomics that renders deeper proteome coverage; we combined low pH reversed‐phase (RP) LC in trifluoroacetic acid in the first dimension, followed by cyclic sample pooling of the eluate and low‐pH RP‐LC in formic acid in the second dimension. The new protocol has a significantly higher resolving power suitable for LC‐ESI‐MS/MS shotgun proteomics. Copyright © 2013 John Wiley & Sons, Ltd.     

Synthesis and crosslinking reaction of a novel polymer containing benzoxazine and phenyleneethynylene moieties in the main chain

A novel polymer, poly( 1 ) containing benzoxazine and phenyleneethynylene moieties in the main chain with number‐average molecular weights ranging from 1400 to 9800 was obtained quantitatively by the Sonogashira–Hagihara coupling polymerization of the corresponding iodophenyl‐ and ethynylphenyl‐substituted monomer 1 . Poly( 1 ) was heated at 200 °C under N₂ for 2 h to obtain the cured polymer, poly( 1 )′ via the ring‐opening polymerization of the benzoxazine moieties. The structures of the polymer before and after curing were confirmed by ¹H‐NMR, IR, and UV–vis absorption and reflectance spectroscopies. Poly( 1 )′ was thermally more stable than monomer 1 and poly( 1 ). A specimen was prepared from a mixture of poly( 1 ) and phenol‐diaminodiphenylmethane type benzoxazine 2 by heating at 200 °C for 2 h under N₂. The poly( 1 )/ 2 resin was thermally stable than bisphenol‐A type benzoxazine resin 3 . Poly( 1 ) exhibited XRD peaks corresponding to the d‐spacings of 1.26–0.98 and 0.40 nm, assignable to the repeating monomer unit and alignment of polymer molecules, respectively. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 2581–2589     

False Detection of Cyanide Ion in Photographic Processing Waste Solutions Using Standardized Reference Methods

Abstract

Although cyanide compounds are not incorporated in photographic processing solutions, false detection of cyanide ion is often encountered during the determination of total cyanide by various standardized methods such as ISO, ANSI and JIS. Various organic compounds and nitrogen compounds in the processing solutions were examined because of this false detection. The results suggest that hydrogen cyanide is formed by a reaction between these compounds during the distillation process for the separation of total cyanide, even though ISO, ANSI and JIS were used. The results support the following three mechanisms of cyanide formation involved in the process: (1) Hydroxylammonium salts reacts with another ingredient, formaldehyde, to form formaldoxime, which then decomposes to HCN. (2) Hydroxylammonium is oxidized by air to form nitrite ion, which subsequently reacts with organic compounds such as aminocarboxylic acids and aromatic amines (the colour-developing agent) to form HCN. (3) Potassium permanganate oxidizes aromatic amines to form HCN.