Cationic ring-opening polymerization of 1,4-anhydro-2,3-di-O-benzyl-α-L-arabinopyranose and synthesis of L-arabinofuranan

1,4-Anhydro-2,3-di-O-benzyl-α-L -arabinopyranose (=1,5-anhydro-2,3-di-O-benzyl-β-L -arabinofuranose) (ABAP) was synthesized and underwent cationic ring-opening polymerization with several kinds of Lewis acids. All the polylmers prepared by Lewis acids as catalyst were found to consist of two different structural units, α-furanosidic and β-furanosidic units, and the structure of the polymers greatly depended on the polymerization conditions. Polymerization of ABAP with antimony pentachloride catalyst at 0°C for 42 h gave a polymer with the highest α content of 93%, and that at ?20°C for 3 h gave a polymer with the lowest (25%) α content. The other catalysts such as phosphorus pentafluoride, boron trifluoride etherate, niobium pentafluoride, and tantalum pentafluoride also afforded polymers with mixed structure of α-and β-furanosides. After debenzylation of poly(ABAP), a new polysaccharide, L -arabinofuranan was obtained.     

QUATERNARY STRUCTURE OF PEA PHYTOCHROME I DIMER STUDIED WITH SMALL-ANGLE X-RAY SCATTERING and ROTARY-SHADOWING ELECTRON MICROSCOPY

Abstract— The quaternary structure of pea phytochrome type I (PI) dimer in the red-light-absorbing form was studied by small-angle X-ray scattering (SAXS) technique and rotary-shadowing electron microscopy. Structural parameters for PI 114 kDa chromopeptide dimer and its tryptically digested N-terminal 59 kDa chromopeptide monomer, such as average electron density, molecular volume and the second moment of electron density distribution, were determined in terms of SAXS using the contrast variation method. Furthermore, by means of model simulation for the scattering profiles of the chromopeptides, most plausible structural models for both peptides were constructed. The distance between the chromophoric domains was estimated to be about 70 A in the resultant model for 114 kDa chromopeptide dimer. Furthermore, the model was consistent with the electron-micrographic images of both the intact PI dimer and the PI 114 kDa chromopeptide dimer, so that the N-terminal 7 kDa fragment did not significantly contribute the low-resolution images of the dimer.     

Syntheses and radical polymerizations of novel optically active vinyl and isopropenyl carbamates having L-leucine structures

Syntheses and radical polymerizations of vinyl and isopropenyl carbamates having L -leucine methyl ester structures, N-vinyloxycarbonyl-L -leucine methyl ester (VOC-L-M) and N-isopropenyloxycarbonyl-L -leucine methyl ester (IOC-L-M), were carried out. VOC-L-M and IOC-L-M were prepared by the reactions of L -leucine methyl ester with vinyl and isopropenyl chloroformates in the presence of sodium hydrogen carbonate. The radical polymerization of VOC-L-M with AIBN (1 mol %) in bulk, chlorobenzene, methanol, and N,N-dimethylformamide afforded the corresponding polymer (poly(VOC-L-M)) with M _n 7,400–19,000. Meanwhile, IOC-L-M afforded no polymer with AIBN at 60°C but afforded a polymer having low molecular weight with BPO at 80°C. The glass transition temperatures of poly(VOC-L-M) and poly(IOC-L-M) were 53 and 65°C, respectively. The 10% weight loss temperatures of poly(VOC-L-M) and poly(IOC-L-M) under nitrogen were 255 and 173, respectively. The copolymerization parameters of VOC-L-M (M₁) and vinyl acetate (M₂) were evaluated as r₁ = 0.92 and r₂ = 0.63. © 1996 John Wiley & Sons, Inc.     

Preparation of palladium clusters protected by silica-supported,crosslinking, partially phosphorylated poly(vinyl alcohol) and their catalytic activity

The palladium cluster protected by silica-supported, crosslinking, partially phosphorylated poly(vinyl alcohol) (P-PVA) was prepared from a crosslinking P-PVA–Pd(II) complex by reduction in alcohol. The P-PVA–Pd complex and the palladium cluster protected by P-PVA were analyzed by electron spectroscopy, X-ray photoelectron spectrometry and transmission electron microscopy. The complex formation between the Pd(II) ion and phosphoric acid groups in P-PVA was important in the formation of a fine palladium cluster. Palladium clusters protected by silica-supported crosslinking P-PVA were used as catalysts for the hydrogenation of nitrobenzene or acrylic acid at 30°C under atmospheric pressure. The palladium cluster protected by crosslinking P-PVA supported on silica was the most active catalyst, was stable and had no by-products, compared with the palladium cluster protected by silica-supported noncrosslinking P-PVA or PVA.     

Unidirectional crystallization of charged colloidal silica due to the diffusion of a base

Dilute aqueous dispersions of charged colloidal silica (particle volume fraction = approximately 0.03-0.04, particle diameter = 110 nm) exhibit unidirectional crystal growth due to the diffusion of a weak base, pyridine (Py). Similar diffusion-crystallization is enabled by a salt of a weak acid and a strong base, sodium hydrogen carbonate (NaHCO3). The resulting crystals consist of columnar (or cubic) crystal grains with a maximum height of a few centimeters and a maximum width of 1 cm. The crystal growth process is attributed to a combination of (i) the diffusion of Py or NaHCO3 accompanied by a charging reaction of the silica particles and (ii) the charge-induced crystallization of the silica colloids. Theoretical growth curves based on the reaction-diffusion model for the case of Py were in good agreement with the observed curves. We also report the immobilization of the resulting large crystals by using a polymer hydrogel matrix.     

Vibrational relaxation on the mixed vibronic levels of the and states in all-trans-neurosporene as revealed by subpicosecond time-resolved, stimulated emission and transient absorption spectroscopy

In all-trans-neurosporene, whose level is lower than the level by one vibrational quantum, the following two steps of vibrational relaxation from the mixed vibronic states were identified, in the order, stimulated emission stimulated emission transient absorption. The stimulated emission patterns were simulated by the use of Franck–Condon factors in the transitions from the pair of mixed vibronic levels down to the ground vibronic levels. The vibronic levels of the mixed and state were characterized theoretically based on the diabatic approximation.     

Separation of closely related structural isomers by inclusion complexation with tailor-made host compounds. Crystal structures of 2,2-di (p-hydroxyphenyl) propane and Its 1:1 complex withp-cresol

The crystal structures of the 2,2-di(p-hydroxyphenyl)propane host and its 1:1 adducts withm-andp-cresol guests have been studied. The preferential complexation of this host withp-cresol overm-cresol is related to the opposite trend exhibited by 1,1-di(p-hydroxyphenyl)cyclohexane; both hosts can separate effectively the two cresols from their liquid mixture by crystalline inclusion. A plausible explanation of the different inclusion features is provided by examining the intermolecular association in the corresponding solids. The analysed structures are stabilized by strong and continuous H-bonding between the constituent entities along two dimensions, and by weak van der Waals forces along the third axis. The p-cresol complex of the title host reveals a unique arrangement within and a more efficient packing of the layered structure, and thus represents a more stable and less soluble crystal lattice than itsm-cresol analog. Supplementary Data relating to this article are deposited with the British Library as Supplementary Publication No. SUP 82099 (8 pages).     

Study on the structures of 2-substituted iminothiazolidine derivatives

The reaction of 2-bromoethylamine 1 with methylisothiocyanate 2 under mild condition gave 2-methyl-amino-2-thiazoline 3 as the major product together with two kinds of byproducts, 3-(N-methylthiocar-bamoyl)-2-methyliminothiazolidine 4 and N,N′-dimethyl-N-(2-thiazolin-2-yl)thiourea 5. Thermal isomer-ization of 5 to 4 was observed. The structures of the byproducts were confirmed by X-ray crystallography.     

Cationic polymerization behavior of seven-membered cyclic sulfite

Cationic ring-opening polymerization behavior of a seven-membered cyclic sulfite ( 1 ) was examined. 1 was prepared by the reaction of 1,4-butanediol with SOCl₂ in 58% yield. The cationic polymerization of 1 was carried out at 0, 25, 60, or 100°C with trifluoromethanesulfonic acid (TfOH), methyl trifluoromethanesulfonate (TfOMe), BF₃ · OEt₂, SnCl₄, methyl p-toluenesulfonate (TsOMe), or MeI as an initiator in bulk under a nitrogen atmosphere to afford the polymer with M̄_n 1000–10,400. The order of activities of the initiators for 1 was as follows, TfOH ≅ TfOMe > SnCl₄ > BF₃ · OEt₂ > TsOMe ≅ MeI. The polymerization of 1 with TfOMe afforded a poly(sulfite) below 25°C, but afforded a polymer containing an ether unit at 60°C, which was formed by a desulfoxylation. The higher the activity of the initiator was, the more easily the desulfoxylation occurred. We expected volume expansion on polymerization because cyclic sulfites have large dipole moment values, but it turned out that 1 showed 4.34% shrinkage on polymerization. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35: 3673–3682, 1997