Effects of oblique-incidence evaporation on magnetic properties of Fe20Ni80/Fe70Co30 bilayer film

Evaporative deposition at oblique incidence is shown to enhance the magnetic anisotropy of an Fe₂₀Ni₈₀ magnetic film and induce magnetic anisotropy in an overlying, strongly isotropic Fe₇₀Co₃₀ film. This deposition method for the formation of an underlayer of several lattice parameters in thickness and semi-hard overlayer of a few thousands Angstroms in thickness achieves a significant change in the magnetization process and strong suppression of the coercive forces of Fe₇₀Co₃₀ in the hard magnetization direction. Soft magnetization of the Fe₇₀Co₃₀ overlayer is not achieved when one of the layers is deposited at oblique incidence. It is anticipated that shape magnetic anisotropy is responsible in part for the magnetic anisotropy induced in both in Fe₂₀Ni₈₀ under- and Fe₇₀Co₃₀ overlayer by oblique incidence evaporation.     

Reduction of inelastic scattering effect by introduction of GalnAs/GalnP strain-compensated superlattice into multi-quantum barriers

The effect of inelastic scattering on the electron reflection in multi-quantum barriers (MQBs) has been examined using the damped resonant tunnelling model for the first time. The electron reflectivity in the virtual barrier region for unstrained GalnAs/InP MQB deteriorates below 100% by about 10% for phase relaxation time of 0.22ps. We propose a strain-compensated GalnAs/GalnP MQB which not only has virtual barrier 4 times as high as that of an unstrained MQB, but whose reflectivity deterioration is reduced to less than 5% in comparison with 10% for unstrained MQB for the same phase relaxation time. We have also successfully grown a Ga_0.25In_0.75As (1.5% compressive) well/Ga_0.25In_0.75P (1.2% tensile) barrier short-period superlattice with six wells by chemical beam epitaxy, which exhibits the possibility of fabrication of the strain-compensated MQBs.     

Light attenuation in a semitransparent foam sheet-Thickness measurement for industrial use

An optical method for measuring the thickness of heterogeneous materials has been studied. The method is based on the light attenuation theory. A complete system has been constructed in order to demonstrate the applicability of the present method for industrial use. The experimental set-up consists of semiconductor lasers, focusing lenses, photo-diodes serving as a power meter and a personal computer with an A/D converter for data acquisition. Averaging of numerous measurements is required in the present method because the heterogeneous cell structure of the foam material yields large fluctuations in transmitted light levels. The fluctuations can be reduced to below 1% of the transmitted light power by 80 times averaging. The error of the measurement is considered to be a few tens of micrometers in thickness. The present system is capable of sampling data at a rate of 400 Hz and has been successfully applied to a manufacturing process.     

Light Diffraction of Aligned Polymer Fibers Periodically Dispersed by Phase Separation of Liquid Crystal and Polymer

We have confirmed light diffraction of aligned polymer fibers obtained by a phase separation of an anisotropic-phase solution of liquid crystal and polymer. He—Ne laser light passing through the polymer fibers was scattered in the axis vertical to the fibers, and had two peaks of light intensity symmetrical to the center of the transmitting laser spot. The two peaks were found to be caused by light diffraction due to the periodic polymer-fiber dispersion because the peaks corresponded to values calculated by intervals between the fibers. The periodical fiber networks are considered to be formed by anisotropic spinodal decomposition. This effect can be used to measure the dispersion order of the polymer fibers. © 2004 The Optical Society of Japan     

Magneto-Optical Measurement of Organic Conductor Using Rotational Cavity System

We have developed a new magneto-optical measurement system using a rotational cavity system equipped with a millimeter vector network analyzer and a 14 T solenoid type super conducting magnet. The measurement can be performed in the transmission configuration down to 1.6 K. The results of the precise angular dependence measurement of quasi-one-dimensional organic conductor (DMET)₂I₃ using the new system are shown, and its Fermi surface will be discussed in connection with the previous reports.     

Measurement on Spot Size Dependence of Dense WDM Dielectric Multilayer Filters

We present the spot size dependence of dielectric multilayer filters for use in dense WDM systems. We found large dependences of filter performances on the spot size and the incident angle of input light, which should be important for miniaturizing multi-channel add/drop filters.     

Density matrix and eigenstates for an excess electron in water

We extend the molecular theory of the solvated electrons [Chandler, Singh and Richardson, J. Chem. Phys. 81, 1975 (1984)] to calculate the density matrix for an excess electron in water. Using this density matrix, the numerically obtained solvent induced interaction [Miura and Hirata, J. Phys. Chem. 98, 9649 (1994)] and our developed method [Sethia, Sanyal and Singh, J. Chem. Phys. 93, 7268 (1990)], we have calculated the eigenstates of the electron in water. These results show that the excees electron in water behaves almost like a free particle with effective mass m* in a constant potential well.     

Enrichment of surfactant from its aqueous solution using ultrasonic atomization

Dilute aqueous solutions of dodecyl-benzenesulfonic acid sodium salt (DBS-Na) and polyoxyethylenenonylphenyl ethers (PONPEs) were ultrasonically atomized. The surfactants were concentrated in collected mist droplets. The enrichment ratio increased with decreasing surfactant concentration. Depending on the surfactant’s molecular weight and affinity to water, different enrichment ratio was observed in the range of low feed concentrations. For anionic surfactant, DBS-Na, the enrichment ratio was significantly improved by KCl addition and a peak appeared on the plot of the ratio against KCl concentration. Addition of NaCl or CaCl₂ · 2H₂O to the surfactant solution also enhanced the enrichment ratio; however, the effect was relatively small. Such behaviors of the ratio were interpreted as enhanced interfacial adsorption of the surfactant and a lack of supply of surfactant monomers from liquid bulk because of slow breaking of surfactant micelles. Time required for collecting an amount of mist was also observed. Among the three salt systems, the time for KCl system was twice as long as others. This fact suggested that the formation of smaller droplets in KCl system.     

Studies on vocal fold injection and changes in pitch associated with alcohol intake

The current study was carried out with particular emphasis on the association between phonetic function tests and alterations in the appearance of the hypopharyngeal and laryngeal mucosa, such as capillary dilatation, edema, and vocal fold injection after alcohol intake. The results demonstrated the occurrence of previously unrecognized pathophysiological changes associated with synchronous phonetic functions in the vocal pathway after alcohol intake. Serum ethanol and aldehyde concentration levels were evaluated hourly for 2.5 h after ingestion of alcohol. When an electronystagmogram showed the typical pattern of alcohol intake, the study was initiated. Occasionally, rhinography was performed on subjects complaining of a stuffy nose after alcohol intake.     

Staggered polarization of vertex models withU_q (\widehat{sl(}n))-Symmetry

In this paper we give an explicit formula for level 1 vertex operators related to as operators on the Fock spaces. We derive also their commutation relations. As an application we calculate with the vector representation of , thereby extending the recent work on the staggered polarization of the XXZ-model.