Effect of polyethylene glycol on preparation of rifampicin-loaded PLGA microspheres with membrane emulsification technique

Monodisperse poly(lactide-co-glycolide) (PLGA) microspheres containing rifampicin (RFP), anti-tubercle drug, as hydrophobic model drug were prepared by solvent evaporation method with a membrane emulsification technique using Shirasu Porous Glass (SPG) membranes. Five kinds of rifampicin-loaded PLGA (RFP/PLGA) microspheres with different sizes were prepared by changing pore size of the membranes. Effect of polyethylene glycol (PEG) added to polyvinyl alcohol (PVA) solution (continuous phase) upon the monodispersity of microspheres was studied. PEG was used as a stabilizer for microspheres dispersing in PVA solution. The most suitable molecular weight of PEG as a stabilizer was 20,000. RFP/PLGA microspheres prepared with PEG20000 were apparently more uniform than those prepared without PEG. The yield of RFP/PLGA microspheres was 100%. The initial burst observed in the release of RFP from RFP/PLGA microspheres was suppressed by the addition of PEG.     

Factors affecting the loading efficiency of water-soluble drugs in PLGA microspheres

Poly(lactide-co-glycolide), PLGA, microspheres containing blue dextran as a hydrophilic model drug were prepared by a solvent evaporation method from w/o/w emulsions using a micro homogenizer. Effects of surfactant concentration in oil phase, stirring time period and stirring rate in the preparation procedure of primary emulsion (w/o) upon drug-loading efficiency were evaluated. Stirring rate during preparation of primary emulsion and surfactant concentration in oil phase affected drug-loading efficiency and the particle size of primary emulsion. Microspheres having the higher drug-loading efficiency were obtained when size differences between the primary emulsions and the secondary ones were large. That is, when the diameter of the primary emulsion is much smaller than that of the secondary emulsion, PLGA microspheres with high-loading efficiency of blue dextran were obtained.     

Paramagnetic relaxation-based 19f MRI probe to detect protease activity

A novel design principle for 19F MRI probes detecting protease activity was developed. This principle is based on 19F MRI signal quenching by the intramolecular paramagnetic effect from Gd3+. The intramolecular Gd3+ dramatically attenuated the 19F probe signal, and the paramagnetic effect was cancelled by the probe hydrolyzation by caspase-3. Using this probe, it was shown that the probe could detect caspase-3 activity spatially from a phantom image using 19F MRI.     

Preparation and properties of monodispersed rifampicin-loaded poly(lactide-co-glycolide) microspheres

Monodispersed rifampicin (RFP)-loaded poly(lactide-co-glycolide) (PLGA) microspheres were prepared by a solvent evaporation method. In order to control the sizes of the microspheres, a membrane emulsification technique using Shirasu porous glass (SPG) membranes was applied. RFP/PLGA microspheres with the average diameters of 1.3, 2.2, 5.2, and 9.0 microm were obtained. They were relatively monodisperse and the values of the coefficient of variation (CV) for the size distributions of the microspheres were in the range between 7.0 and 16.0%. The loading efficiency of RFP was in the range between 50.3 and 67.4% independent of the microsphere size. The release ratio of RFP from RFP/PLGA microspheres was measured in pH 7.4 PBS at 37 degrees C. From RFP/PLGA microspheres with average diameters of 1.3 and 2.2 microm, almost 60% of RFP loaded in the microspheres was released in the initial day and the release was terminated almost within 10 days. On the other hand, from those with average diameters of 5.2, and 9.0 microm, the release of RFP was observed even 20 days after the release started.     

Prediction of micro-bubble dissolution characteristics in water and seawater

This paper is concerned with the prediction of micro-bubble dissolution characteristics in water and seawater when microbubbles are generated by a Sadatomi-type micro-bubble generator (2003) with a spherical body in a flowing liquid tube. In the experiments, in order to know the effects of the salinity on the characteristics, tap water and an artificial seawater with different salt concentrations of 1 and 3 wt% were used as the test liquids. Parameters measured were the Sauter mean diameter of bubbles, d_BS, the void fraction, α, the rising velocity of bubbles, u_G, the interfacial area concentration, a, the volumetric mass transfer coefficient, K_La, and the liquid-side mass transfer coefficient, K_L. In the analysis, for predicting α, K_La and K_L, some correlations in the literatures were tested against the present data. Furthermore, in order to improve the predictability, new correlations were developed based on the present data. The prediction of K_La with the new correlation agreed well with Nishino et al.’s [T. Nishino, K. Terasaka, M. Ishida, Application for several micro-bubble generators for gas absorber, in: Proceedings of the Annual Meeting of the Japanese Society for Multiphase Flow, 2006, pp. 276–277 (in Japanese)] and Li and Tsuge’s [P. Li, H. Tsuge, Water treatment by induced air flotation using microbubbles, Journal of Chemical Engineering of Japan 39 (2006) 896–903; P. Li, H. Tsuge, Ozone transfer in a new gas-induced contactor with microbubbles, Journal of Chemical Engineering of Japan 39 (2006) 1213–1220] data for different aeration systems using several different micro-bubble generators.     

Intracluster electron transfer from a metal atom/cluster followed by anionic oligomerization of vinyl molecules

Intracluster electron transfer and oligomerization reaction were investigated by mass spectrometry of clusters of alkali metal atom (M) with acrylonitrile (AN; CH₂=CHCN). In the photoionization mass spectra of M(AN)_n, magic numbers were clearly observed at n = 3k (k = 1-4 for M = Na and K, k = 1 for M = Li). The results of photodissociation of neutral K(AN)_n indicate that the n = 3 cluster has an anomalous stability relative to other sizes of clusters. The C=C bond in vinyl molecules is also found to be necessary to form the magic numbers by measuring the photoionization mass spectrum of K atom with propionitrile. These results strongly support the intracluster anionic oligomerization reaction initiated by electron transfer from the alkali atom. The quantum chemical calculations have revealed that the evaporation induced by excess energy generated by intracluster oligomerization is important to form the magic numbers in the present clusters. Received 29 November 2000     

High‐sensitivity simultaneous quantification of tacrolimus and 13‐O‐demethyl tacrolimus in human whole blood using ultra‐performance liquid chromatography coupled to tandem mass spectrometry

Blood concentrations of tacrolimus show large variability among patients and the narrow therapeutic range is related to adverse effects. Therefore, therapeutic drug monitoring is needed for strict management. 13‐O‐Demethyl tacrolimus (13‐O‐DMT) was reported as the major metabolite formed by cytochrome P450 (CYP)3A such as CYP3A5. In previous studies, the best lower limit of quantification (LLOQ) was 0.1 ng/mL for both substances. However, this LLOQ may not be low enough now because the dosage of tacrolimus has decreased in recent years. The purpose of this study was to develop and validate a high‐sensitivity and high‐throughput assay for simultaneous quantification of tacrolimus and 13‐O‐DMT in human whole blood using ultra‐performance liquid chromatography with tandem mass spectrometry (UPLC–MS/MS). Thirty‐five stable kidney transplant recipients receiving tacrolimus were recruited in this study. The calibration curve range was 0.04–40 ng/mL. All calibration samples and quality control samples fulfilled the requirements of the US Food and Drug Administration and the European Medicines Agency guidelines for assay validation. Trough concentrations of tacrolimus and 13‐O‐DMT in 35 stable kidney transplant recipients receiving tacrolimus were within the range of the respective calibration curve. Our novel UPLC–MS/MS method is more sensitive than previous methods for quantification of tacrolimus and 13‐O‐DMT.     

Impacts of earmarked private donations for disaster fundraising

Faced with large humanitarian emergencies like the earthquakes in Haiti and Japan, aid agencies have to decide how to collect money for their relief work. They can either decide to establish a special fund for the emergency and allow for earmarked donations or they can only allow for unearmarked donations. In this paper, we analyze impacts of this decision on donors, aid agencies, and policy makers. To this end, we compare two prevalent fundraising modes using optimization models: fundraising with the option of earmarking donations and fundraising without an earmarking option. In the earmarked case, we consider a new fundraising challenge, excessive funds raised for certain disaster relief projects. We find that desirable fundraising modes for donors, aid agencies, and policy makers differ depending on levels of several parameters, including an aid agency’s utility of a dollar raised, the fundraising cost factor, and donors’ unit utility of donations. Allowing for earmarking leads to a lower overall fundraising cost percentage. For emergencies with strong media attention and donor interest, allowing for earmarking of donations is likely to reduce fundraising activities of organizations with low fundraising costs, while it is likely to encourage fundraising activities among organizations with high fundraising costs.     

A Novel Double‐Network Hydrogel Induces Spontaneous Articular Cartilage Regeneration in vivo in a Large Osteochondral Defect

We have developed a novel method to induce spontaneous hyaline cartilage regeneration in vivo for a large osteochondral defect by implanting a plug made from a double‐network hydrogel composed of poly(2‐acrylamido‐2‐methylpropanesulfonic acid) and poly(N,N′‐dimethylacrylamide) at the bottom of the defect, leaving the cavity vacant. In cells regenerated in the treated defect, type‐2 collagen, Aggrican, and SOX9 mRNAs were highly expressed and the regenerated matrix was rich in proteoglycan and type‐2 collagen at 4 weeks. This fact gave a significant modification to the commonly established concept that hyaline cartilage tissue cannot regenerate in vivo. This study prompted an innovative strategy in the field of joint surgery to repair an osteochondral defect using an advanced, high‐function hydrogel.