Photochemical behavior of poly(ethylacryloylacetate) and poly(acryloylacetone) films

Films of poly(ethylacryloylacetate) (PEAA) and poly(acryloylacetone) (PAA) were subjected to UV irradiation (λ = 254 nm) at room temperature. The photoinduced structure transfer from cis-enol onto a diketo forms has been investigated. The structure transfer caused by UV light was found to be slower than for the corresponding process in solution. The spectral investigations (UV, IR) showed reversible process of photoketonization. The results were analyzed in terms of the model for the participation of the trans-enol form in the process of the ketonization. Based on the results obtained, some general conclusions were made about the organization of the units in the polymer chain. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35: 3683–3688, 1997     

The Biological Effects of Forsythia Leaves Containing the Cyclic AMP Phosphodiesterase 4 Inhibitor Phillyrin

Forsythia fruit (Forsythia suspensa Vahl (Oleaceae)) is a common component of Kampo medicines for treating the common cold, influenza, and allergies. The main polyphenolic compounds in the leaves of F. suspensa are pinoresinol β-d-glucoside, phillyrin and forsythiaside, and their levels are higher in the leaves of the plant than in the fruit. It is known that polyphenolic compounds stimulate lipid catabolism in the liver and suppress dyslipidemia, thereby attenuating diet-induced obesity and polyphenolic anti-oxidants might attenuate obesity in animals consuming high-fat diets. Recently, phillyrin was reported as a novel cyclic AMP phosphodiesterase 4 (PDE4) inhibitor derived from forsythia fruit. It was expected that the leaves of F. suspensa might display anti-obesity effects and serve as a health food material. In this review, we summarized our studies on the biological effects of forsythia leaves containing phillyrin and other polyphenolic compounds, particularly against obesity, atopic dermatitis, and influenza A virus infection, and its potential as a phytoestrogen.     

Optimal ordering and pricing policy for an inventory system with trial periods

It is a business practice that home shopping companies offer a free trial period for their products with a goal of increasing sales. Under this policy, if for any reason customers are not satisfied with the purchase, they can return the product for a refund within the trial period. To develop inventory strategies in such environment, home shopping companies should take the return phenomenon into account so as to increase their profit. This paper considers this phenomenon and develops a seasonal inventory model to deal with the problem. Two scenarios are analyzed. In the first scenario, demand is assumed to be linearly price-dependent while in the second one, it is assumed to be exponentially price-dependent. The purpose of this research is to maximize the total profit over a given planning period by determining the optimal ordering quantity and price. The analytical results demonstrate that the optimal ordering quantity and prices are obtained using closed-form formulas.     

First results from KamLAND: evidence for reactor antineutrino disappearance

KamLAND has measured the flux of nu;(e)'s from distant nuclear reactors. We find fewer nu;(e) events than expected from standard assumptions about nu;(e) propagation at the 99.95% C.L. In a 162 ton.yr exposure the ratio of the observed inverse beta-decay events to the expected number without nu;(e) disappearance is 0.611+/-0.085(stat)+/-0.041(syst) for nu;(e) energies >3.4 MeV. In the context of two-flavor neutrino oscillations with CPT invariance, all solutions to the solar neutrino problem except for the "large mixing angle" region are excluded.     

High-brightness 138-W green laser based on an intracavity-frequency-doubled diode-side-pumped Q-switched Nd:YAG laser

Green power of 138 W was generated at an estimated beam quality of M(2) = 11 by intracavity frequency doubling of a diode-pumped Nd:YAG laser. The laser employs a diffusive close-coupled diode-pumping design and a bifocusing-compensation resonator design to ensure stable operation.     

Longitudinal flow characteristics of vertically falling liquid films without concurrent gas flow

Flow characteristics of liquid films vertically falling along the outer wall of a circular tube without concurrent gas flow are experimentally studied, and attention is given to the longitudinally developing liquid film flow in the flow direction. Flow measurements are carried out by the methods of needle contact and electric capacity, and the obtained data are statistically processed.There exists a definite difference in flow characteristics such as wave motion patterns, film thicknesses, critical Reynolds number, and so on, depending strongly on the longitudinal distance in the flow direction as well as the liquid film Reynolds number. Measured probability distributions of interfacial waves can be well expressed by the functions of probability distribution statistically well-known as normal, logarithmic normal and gamma distributions. In terms of these functions, interfacial wave patterns are definitely classified over the whole experimental flow regime. As a rule, interfacial wave motion proceeds vigorously with increases of the longitudinal distance and Reynolds number; however, there exists a flow condition that wave fluctuation never grows up but declines regardless of an increase of Reynolds number.     

Thermally stimulated current from extended-chain crystals of polyethylene

Thermally stimulated current (TSC) has been observed in extended-chain crystals of polyethylene above room temperature. The TSC spectra exhibit two current peaks of opposite polarity. The peaks were separated into separate components by curve fitting. The position of the negative peak, which appears at 123°C, is independent of charging conditions. The positive current increases after γ irradiation or aging of the samples.     

Hydrogen-induced instability of the Ge(105) surface

The structure and stability of the hydrogen-terminated (105) surface of Ge deposited on Si(105) substrates are investigated by scanning tunneling microscopy (STM). Investigations combining STM, electron energy loss spectroscopy, and theory reveal that Si incorporation into the surface Ge layer of hydrogen-terminated Ge/Si(105) drastically destabilizes the surface. The STM images obtained on this surface are well explained by the recently established rebonded-step structure model.     

Flavonoids from Sedum japonicum subsp. oryzifolium (Crassulaceae)

Twenty-two flavonoids were isolated from the leaves and stems of Sedum japonicum subsp. oryzifolium (Crassulaceae). Of these compounds, five flavonoids were reported in nature for the first time, and identified as herbacetin 3-O-xyloside-8-O-glucoside, herbacetin 3-O-glucoside-8-O-(2′′′-acetylxyloside), gossypetin 3-O-glucoside-8-O-arabinoside, gossypetin 3-O-glucoside-8-O-(2′′′-acetylxyloside) and hibiscetin 3-O-glucoside-8-O-arabinoside via UV, HR-MS, LC-MS, acid hydrolysis and NMR. Other seventeen known flavonoids were identified as herbacetin 3-O-glucoside-8-O-arabinoside, herbacetin 3-O-glucoside-8-O-xyloside, gossypetin 3-O-glucoside-8-O-xyloside, quercetin, quercetin 3-O-glucoside, quercetin 3-O-xylosyl-(1→2)-rhamnoside-7-O-rhamnoside, quercetin 3-O-rhamnoside-7-O-glucoside, kaempferol, kaempferol 3-O-glucoside, kaempferol 7-O-rhamnoside, kaempferol 3,7-di-O-rhamnoside, kaempferol 3-O-glucoside-7-O-rhamnoside, kaempferol 3-O-glucosyl-(1→2)-rhamnoside-7-O-rhamnoside, kaempferol 3-O-xylosyl-(1→2)-rhamnoside, kaempferol 3-O-xylosyl-(1→2)-rhamnoside-7-O-rhamnoside, myricetin 3-O-glucoside and cyanidin 3-O-glucoside. Some flavonol 3,8-di-O-glycosides were found in Sedum japonicum subsp. oryzifolium as major flavonoids in this survey. They were presumed to be the diagnostic flavonoids in the species. Flavonoids were reported from S. japonicum for the first time.     

Effects of metal salts on polymerization. VI. Photo and thermally catalyzed polymerization of N-vinylimidazole in the presence of metal salts

Polymerization of 2-methyl-1-vinylimidazole (MVI) and 2-ethyl-1-vinylimidazole (EVI) was found to be markedly photosensitized in the presence of oxidizing metal salts such as UO₂(NO₃)₂, Ce(NH₄)₂(NO₃)₆, Hg(CH₃COO)₂, AgNO₃; non-oxidizing metal salts such as Zn^II did not act as photosensitizers. The interaction of monomer with a metal salt is discussed on the basis of infrared and electronic spectroscopy. This photopolymerization is very specific with respect to the kind of monomer. The polymerization of noncomplexing monomer (styrene) is not photosensitized by these metal salts. Consequently, photosensitized electron transfer between monomer and metal salt via complex formation is considered to be the most probable initiation mechanism. Cupric acetate and sodium chlorolaurate, which have been reported as efficient initiators for the polymerization of vinylpyridine and N-vinylcarbazole, respectively, act as linear terminators of growing radicals. The radical polymerizability of the zinc complex of MVI was studied by means of copolymerization with styrene. The reduction of the reactivity of MVI on complexing was explained by correlating with the spectroscopic observations. Because the polymerization system is heterogeneous, a detailed discussion was not possible.