Optical switch of diffractive light from a BCT photonic crystal based on HPDLC doped with azo component

This study demonstrates an optical switch of the diffractive light from a body-centered tetragonal photonic crystal based on holographic polymer-dispersed liquid crystals that are fabricated using two-beam interference with multiple exposures. The liquid crystal-rich regions form the lattice points of the PC, which contains a liquid crystal/azo-dye mixture. The concentration of the cis isomer changes under laser light exposure; this change, in turn, modulates the effective index of the LCs, and then switches diffractive light.     

Abnormal grain growth of WC with small amount of cobalt

Abnormal grain growth (AGG) often appears in the synthesis of cemented tungsten carbide (WC), especially where ultra-fine powder is used. In this study, it was observed that AGG was strongly affected by the amount of Co. The obvious AGG was found to occur when the amount of Co was between 0.2 and 0.9 wt%. Careful examination of the etched samples found crack-like defects in abnormal grains, which were indications of grain boundaries in these large grains. Therefore, it is suggested that the considerable AGG of WC at lower Co concentrations be attributed to a grain boundary re-entrant edge (GBRE)-assisted two-dimensional nucleation process. Grain coalescence during sintering was the source of the grain boundaries. Due to the selective wetting of (0001) WC planes with the Co liquid, those grain boundaries were parallel to the (0001) planes resulting in platelet-like large grains with high aspect ratio. The amount of Co would affect the number of the wetted (0001) planes and the probability of grain boundary formation, and hence affect the AGG. The correspondence of the calculated weight percentage of Co required surrounding all the planes of WC grains and the experimental upper limit of the range supported this mechanism.     

Charged Higgs Boson Contribution to \overline{\nu}_{e}-e Scattering from Low to Ultrahigh Energy in Higgs Triplet Model

We study the $\overline{\nu}_{e}-e$ scattering from low to ultrahigh energy in the framework of Higgs Triplet Model (HTM). We add the contribution of charged Higgs boson exchange to the total cross section of the scattering. We obtain the upper bound $h_{ee}/M_{H^{\pm}}\lesssim2.8\times10^{-3}~\mbox{GeV}^{-1}$ in this process from low energy experiment. We show that by using the upper bound obtained, the charged Higgs contribution can give enhancements to the total cross section with respect to the SM prediction up to 5.16 % at E≤10¹⁴ eV and maximum at $s\approx M_{H^{\pm}}^{2}$ and would help to determine the feasibility experiments to discriminate between SM and HTM at current available facilities.     

Synthesis and evaluation of in vitro bioactivity for polysubstituted N-arylpyrazole derivatives

New polysubstituted N-arylpyrazole derivatives were synthesized from N1-arylsydnone with acetylene and boronic acid, including 2-thiophenyl, 3-thiophenyl, 2-benzo[b]thiophenyl, or dibenzothiophenyl-4-boronic acid, via 1,3-dipolar cycloaddition and Suzuki coupling reaction. Based on the growth inhibitory activity results against lung carcinoma (NCI-H226), nasopharyngeal (NPC-TW01), and T-cell leukemia (Jurkat) cancer cells, compounds 5d and 7d with dibenzothiophenyl bioisostere possessed the significant inhibitory activity for NPC-TW01 (32 μM and 16 μM) and NCI-H226 (16 μM and 8.9 μM), respectively.     

Use of ultraviolet-light irradiated multiple myeloma cells as immunogens to generate tumor-specific cytolytic T lymphocytes

Background

As the eradication of tumor cells in vivo is most efficiently performed by cytolytic T lymphocytes (CTL), various methods for priming tumor-reactive lymphocytes have been developed. In this study, a method of priming CTLs with ultraviolet (UV)-irradiated tumor cells, which results in termination of tumor cell proliferation, apoptosis, as well as upregulation of heat shock proteins (HSP) expression is described.

Methods

Peripheral blood mononuclear cells (PBMC) were primed weekly with UV-irradiated or mitomycin-treated RPMI 8226 multiple myeloma cells. Following three rounds of stimulation over 21 days, the lymphocytes from the mixed culture conditions were analyzed for anti-MM cell reactivity.

Results

By day 10 of cultures, PBMCs primed using UV-irradiated tumor cells demonstrated a higher percentage of activated CD8+/CD4- T lymphocytes than non-primed PBMCs or PBMCs primed using mitomycin-treated MM cells. Cytotoxicity assays revealed that primed PBMCs were markedly more effective (p < 0.01) than non-primed PBMCs in killing RPMI 8226 MM cells. Surface expression of glucose regulated protein 94 (Grp94/Gp96) and Grp78 were both found to be induced in UV-treated MM cells.

Conclusion

Since, HSP-associated peptides are known to mediate tumor rejection; these data suggest that immune-mediated eradication of MM cells could be elicited via a UV-induced HSP process. The finding that the addition of 17-allylamide-17-demethoxygeldanamycin (17AAG, an inhibitor of HSP 90-peptide interactions) resulted in decreased CTL-induced cytotoxicity supported this hypothesis. Our study, therefore, provides the framework for the development of anti-tumor CTL cellular vaccines for treating MM using UV-irradiated tumor cells as immunogens.     

Growth and properties of GaSb, Ga1-xInxSb and Ga1-xAlxSb epilayers by MOCVD

GaSb-based compound semiconductors are suitable materials for low-noise avalanche photo-diodes(APD's) and long wavelength laser diodes and photodetectors. In this paper, we review the metal organic chemical vapor deposition (MOCVD) growth conditions and the properties of GaSb, GaInSb and AlGaSb epitaxial layers, including the effects of III/V ratio, growth temperature, pressure and growth rate on electrical quality, optical properties, surface morphology and solid distribution coefficients.     

Thin-disk piezoceramic ultrasonic motor. Part I: design and performance evaluation

The purpose of this study is to gain the knowledge and experience in the design of thin-disk piezoceramic-driving ultrasonic actuator dedicated. In this paper, the design and construction of an innovative ultrasonic actuator is developed as a stator, which is a composite structure consisting of piezoceramic (PZT) membrane bonded on a metal sheet. Such a concentric PZT structure possesses the electrical and mechanical coupling characteristics in flexural wave. The driving ability of the actuator comes from the mechanical vibration of extension and shrinkage of a metal sheet due to the converse piezoelectric effect, corresponding to the frequency of a single-phase AC power. By applying the constraints on the specific geometry positions on the metal sheet, the various behaviors of flexural waves have been at the different directions. The rotor is impelled by the actuator with rotational speeds of 600 rpm in maximum using a friction-contact mechanism. Very high actuating and braking abilities are obtained. This simple and inexpensive structure of actuator demonstrates that the mechanical design of actuator and rotor could be done separately and flexibly according to the requirements for various applications. And, its running accuracy and positioning precision are described in Part II.A closed loop servo positioning control i.e. sliding mode control (SMC) is used to compensate automatically for nonlinearly mechanical behaviors such as dry friction, ultrasonic vibrating, slip-stick phenomena. Additionally, SMC scheme has been successfully applied to position tracking to prove the excellent robust performance in noise rejection.     

Theoretical study of salicylaldehyde conformal isomers and their intramolecular oxygen and hydrogen relations

To verify the semiempirical‐type localized hydrogen bonding analysis methods introduced by us several years ago, the intramolecular oxygen and hydrogen relations within salicylaldehyde are selected as the major topic in this theoretical study. The B3LYP/6‐31G** density functional method is chosen for both the full‐optimization and frequency‐type calculations. Four ortho‐type planar conformal isomers are proven to be local minima, and four internal rotation transition states are found by QST3‐type calculation. The special interpretations of  CHO and  OH characteristic frequencies, energy barriers, and thermal chemical results are discussed. In the semiempirical scheme, both local hydrogen bonding population analysis and localized hydrogen bond energy breaking procedures are applied to five pairs of related oxygen and hydrogen atoms in each isomer. The explanations for the strong or weak hydrogen bonds and intra‐CHO repulsion relationships are discussed. ©1999 John Wiley & Sons, Inc. Int J Quant Chem 74: 395–404, 1999     

Rate Study of Proton Catalyzed SmI2 Reduction of 2‐Heptanone and 1,2‐Epoxydecane

Rate constants directly measured from the GC‐analyzed method for SmI₂ reduction of 2‐heptanone and 1,2‐epoxydecane in the presence of various proton sources were obtained. Water exhibits much stronger catalytic effect than methanol and t‐butanol. Dependence of reaction rates on concentration of SmI₂ and temperature were studied.     

‘One-flask’ synthesis to 3,5-disubstituted 1,2,4-triazoles from aldehydes with hydrazonoyl hydrochlorides via 1,3-dipolar cycloaddition

A new ‘one-flask’ synthesis of 3,5-disubstituted 1,2,4-triazoles has successfully been developed to synthesize a series of 3,5-disubstituted 1,2,4-triazoles. The transformation involves the 1,3-dipolar cycloaddition reaction of hydrazonoyl hydrochlorides with oxime intermediates prepared from aldehydes with hydroxylamine hydrochloride in the presence of excess amount of triethylamine. In this ‘one-flask’ 1,3-dipolar reaction, hydrazonoyl hydrochlorides was concerned as the masked 1,3-dipole nitrilimine under basic condition. Furthermore, this newly developed methodology can be applied to various aldehyde substrates including aliphatic, cyclic aliphatic, aromatic, and heterocyclic aldehydes.