The magnetocaloric effect in Nd(Co1−xFex)12B6 alloys

The first-order phase transitions in NdFe₁₂B₆ and PrFe₁₂B₆ alloys give rise to giant values of magnetic entropy changes in relatively low field. However, the metastable nature of these alloys associates with a special procedure of preparation and considerable amount of impurities inevitably. By alloying NdFe₁₂B₆ with the iso-structural compound of NdCo₁₂B₆ appropriately, a Nd(Co_1−xFe_x)₁₂B₆ system which possesses the stable SrNi₁₂B₆-type structure can be obtained directly via the standard casting-and-annealing method. Remarkably improved thermal and magnetic reversibility are observed in the present system. The second-order phase transitions in NdCo₁₂B₆ alloy give rise to the relative cooling power, which is comparable with that of NdFe₁₂B₆ alloy around the ordering temperature.     

Structural, elastic and electronic properties of a new ternary-layered Ti2SiN

The structural, elastic and electronic properties of Ti₂SiN were studied by first-principle calculations. The calculated bond lengths of Ti-Si and Ti-C are 2.65 and 2.09 Å, respectively. The results show Ti₂SiN is mechanically stable, and its bulk modulus B, shear modulus G, Young's modulus E, Poisson's ratio μ and anisotropy factor A are determined to be 182 GPa, 118 GPa, 291 GPa, 0.233 and 1.57, respectively. The calculated electronic structure indicates that Ti₂SiN is anisotropic and conductive.     

Dual-core ytterbium fiber amplifier for high-power 1060 nm swept source multichannel optical coherence tomography imaging

A novel (to our knowledge) dual-core ytterbium (Yb(3+)) doped fiber, as an optically pumped amplifier, boosts the output power from a 1060 nm swept source laser beyond 250 mW, while providing a wavelength tuning range of 93 nm, for optical coherence tomography (OCT) imaging. The design of the dual-core Yb-doped fiber amplifier and its multiple wavelength optical pumping scheme to optimize output bandwidth are discussed. Use of the dual-core fiber amplifier showed no appreciable degradation to the coherence length of the seed laser. The signal intensity improvement of this amplifier is demonstrated on a multichannel in vivo OCT imaging system at 1060 nm.     

Bounds on an anomalous dijet resonance in W+jets production in pp collisions at √s = 1.96 TeV

We present a study of the dijet invariant mass spectrum in events with two jets produced in association with a W boson in data corresponding to an integrated luminosity of 4.3 fb(-1) collected with the D0 detector at √s = 1.96 TeV. We find no evidence for anomalous resonant dijet production and derive upper limits on the production cross section of an anomalous dijet resonance recently reported by the CDF Collaboration, investigating the range of dijet invariant mass from 110 to 170 GeV/c(2). The probability of the D0 data being consistent with the presence of a dijet resonance with 4 pb production cross section at 145 GeV/c(2) is 8×10(-6).     

The research and preparation of a novel nano biodegradable polymer external reinforcement

The use of current drug-loaded vascular scaffolds is limited in sustained drug release and stability studies in clinical and preclinical trials. We found that poly(l-glutamic acid)-b-poly(propylene oxide)-b-poly(l-glutamic acid) (PLGA-b-PPO-b-PLGA) triblock copolymers can deliver multiple poorly water-soluble drugs (e.g., Paclitaxel) at clinically relevant doses. In this study, we synthesized a new drug-loaded vascular external graft with electrospun nanofibrous scaffolds [poly(l-lactide-co-?-caprolactone) (PLCL):fibrinogen; 2:1 (w/w)] and drug-loaded PLGA-b-PPO-b-PLGA micelles. Cell proliferation and viability assay results showed that beagle smooth muscle cells grew well on the surface of vascular graft-coated micelles at a percentages of 10% (w/w) GPG:PLCL-fibrinogen. This study demonstrates that micelle-coated electrospun PLCL-fibrinogen vascular scaffolds have potential applications in vascular tissue engineering.     

Anomalous changes in CuO2 plane in YBa2Cu4O8 under pressure

We report the results of an atomistic simulation study of the pressure-induced structural changes in YBa₂Cu₄O₈ from 0 to 20 GPa. It is found that the crystal has similar compressibilities in the a- and b-directions over the whole pressure range, whereas in the c-direction there are quite different compressibilities at different pressures. Our results suggest that there exists a correlation between the charge transfer and the change in the Cu(2)---O(1) bond length, but we do not support the suggestion of a direct dependence of T_c on the length of this bond. However, we predict that there are anomalous changes in the CuO₂ plane with pressure, which we propose may lead to a charge carrier redistribution on in-plane copper and in-plane oxygens, which in turn may be related to the optimum carrier concentration in the CuO₂ plane.     

高纯金属镨中痕量稀土杂质的电感耦合等离子体原子发射光谱分析及光谱干扰的校正

本文提出了PGS-2型平面光栅光谱仪(色散率0.18纳米,二级光谱)与PlasmaTherm ICP-5000D射频发生器联用,乙醇预去溶方式进样,同时直接测定高纯金属镨中5个痕量稀土杂质元素的方法。并讨论了基体浓度对检出限的影响以及光谱干扰及其校正方法。当样品溶液中镨的浓度为5毫克/毫升时,测定下限分别为镧、钕和钐0.002%,铈0.003%和钇0.0005%。获得了良好的实验结果,其相对标准偏差为1.2-6.2%。     

Characterization of graded-index planar waveguides and analysis of modal coupling for the design of integrated optical components produced by ion-exchange in glass and induced by Kerr effect

An experimental analysis of graded-index (GRIN) planar waveguides produced by ion exchange in soda-lime glass is presented. This study is based on a recent model describing nonlinear diffusion. Likewise the modal coupling between planar waveguides, produced in the same substrate, is analyzed in order to design efficient integrated optical components. Finally, waveguiding structures induced by Kerr effect in glass are proposed and analyzed.     

光致聚合物的高密度数字全息存储特性综述

文章综述了光致聚合物的高密度数字全息存储特性,可以看到光致聚合物将是高密度数字全息存储最有希望最先获得突破的材料。     

半导体量子电子和光电子器件

本阐述了半导体异质结构电子的量子特性,如电子波输运,库仑阻塞效应等,介绍了几种新颖,典型的量子电子器件和量子光电子器件的物理模型和基本原理,这些器件包括了单电子晶体管,共振隧穿二极管,高电子迁移率晶体管,δ掺杂场效应晶体管,量子点元胞自动机,量子阱红外探测器,埋沟异质结半导体激光器,量子级联激光器等,给出了作在半导体量子器件物理方面的最新研究结果。