Surface-enhanced Raman scattering study of polymer on metals. III. Chemisorbed polybenzimidazole and its corrosion-inhibiting properties at high temperature

Chemisorption of polybenzimidazole on silver and copper etched with nitric acid has been observed by surface-enhanced Raman scattering (SERS). The polymer is found to react chemically with silver, forming a complexed film on the surface. The SERS spectra show that polybenzimidazole film inhibits oxidation of the metal at high temperature, unlike chemisorbed benzimidazole, benzotriazole, and poly(4-vinyl pyridine). © 1992 John Wiley & Sons, Inc.     

一维应变压缩下TC4钛合金绝热剪切研究

 利用内径为57 mm的压缩气炮，在撞击速度为0.2~1.2 km/s（相应的靶中压力为3~15 GPa）范围内进行对称碰撞实验，以研究TC4（Ti-Al6-V4）钛合金在一维应变冲击压缩条件下的绝热剪切现象。对回收得到的受冲击样品，在扫描电镜（SEM）下进行细观金相分析。结果指出，一维应变冲击压缩条件下，TC4钛合金中绝热剪切带产生的对称碰撞速度阈值为500 m/s（相当于样品中的压力为5.87 GPa）；主剪切带与冲击方向约为45°角，带上有圆形和椭圆形两种孔洞且随碰撞速度的增大而增多和长大，这是典型的韧性损伤特征。随碰撞速度增大，产生与主剪切带成15°角的支剪切带。这些与理论预言相符。X射线能谱分析结果指出，剪切带内材料发生了(α+β)→β相的转变，是典型的相变带。剪切带的温度估算与实验提供的信息吻合。     

从数学解题看数学美

本论述了“教学好玩”(陈省身语)的五个方面；教学语言精确；教学发现(类比发现；归纳发现和直党发现)；教学解题思路；教学思想方法和数学应用都体现了教学关。     

线性加指数效用函数的组合投资研究

应用无差异曲线法较好地解决了在投资决策分析中具有特殊重要地位的线性加指数效用函数的最优组合投资比例的求解问题,并给出实例予以说明.     

Bio-antioxidant of Anthraquinone Derivatives

The Rubiaceae family is well known for containing anthraquinones. More specifically, lapachol and its analogues are known to possess antitumor, antibiotic, antimalarial and antiulceric activities.[1] Several report indicated that some quinones containing OH in its structure were found to have higher bio-activity than quinines lacking the OH group.     

如何在教学中开拓学生的发散性思维

从初中进入高一级学校，物理跨了一个高台阶，常使学生感到束手无策，“一听就懂，一做就错．”是学生经常向老师谈的体会．为什么会产生这一情况呢?原因是他们的习惯思维在作怪，使他们在看问题时总有盲点，怎样才能开拓学生的发散性思维?使他们的思维在今后的学习中不为所“框”、不为所“漏”．我认为应从以下方面着手．     

Competitive influence of atactic polystyrene and supercritical carbon dioxide on the conformation of syndiotactic polystyrene

The crystallization behavior of miscible syndiotactic polystyrene (sPS) and atactic polystyrene (aPS) blends with different sPS/aPS weight ratios was investigated in supercritical CO₂ by using Fourier‐transform infrared spectroscopy, differential scanning calorimetry, and wide‐angle X‐ray diffraction. Supercritical CO₂ and aPS exhibited different effects on the conformational change of sPS and competed with each other. Increasing the content of amorphous aPS in the blends made its effect on the conformational change of sPS gradually surpass that of supercritical CO₂. Supercritical CO₂ favored the formation of the helical conformation of sPS in lower temperature range and the all trans planar conformation in higher temperature range, instead of forming the latter one only in higher temperature range in ambient atmosphere. However, increasing aPS content in the blends pushed the range for forming the helical conformation to lower temperature and made the all trans planar conformation dominant in aPS/sPS 25/75 blend after treating in supercritical CO₂ above 60 °C. The all trans planar zigzag conformation was more favorable than the helical conformation after mixing aPS in sPS in supercritical CO₂. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 1755–1764, 2007     

2,3,4,5,6‐Penta­nitro­aniline 1,2‐dichloro­ethane disolvate: `push–pull' deformation of aromatic rings by intra­molecular charge transfer

The title compound, C₆H₂N₆O₁₀·2C₂H₄Cl₂, forms layered stacks of penta­nitro­aniline mol­ecules, which possess twofold symmetry. The voids between these stacks are occupied by dichloro­ethane mol­ecules, which reside near a 2/m symmetry element and display pseudo‐inversion symmetry. The C atoms in one of the two solvent mol­ecules are threefold disordered. In the penta­nitro­aniline mol­ecule, considerable distortion of the benzenoid ring, coupled with the short C—N(H₂) bond and out‐of‐plane NO₂ twistings, point to significant intra­molecular `push–pull' charge transfer at the amino‐ and nitro‐substituted (ortho and para) positions, as theoretically quantified by natural bond orbital analysis of the π‐electron density.     

The fabrication and characterization of poly(lactic acid) scaffolds for tissue engineering by improved solid–liquid phase separation

In this article a new technique was developed to fabricate scaffolds with a unique microstructure by solid–liquid separation in combination with particulate-leaching. Firstly, the effects of polymer concentration, quenching temperature on the porous morphology and the mechanical property of obtained scaffolds during solid–liquid separation have been investigated. Then, salt granules as porogen were introduced into the solid–liquid phase separation to produce the unique pore structure of the scaffold. The pore diameter of the scaffold could be controlled with the particulate size and the wall of pores possessed special microstructure, which enhanced the pore interconnectivity. The cell culture results confirmed that a good interconnectivity of the scaffold prepared by the improved solid–liquid separation was useful for nutrition transportation and cell proliferation. Copyright © 2003 John Wiley & Sons, Ltd.