场源基本微元的对称性与场的性质

直接由标量基本微元（点源）和矢量基本微元（电流元等）的对称性和两个基本假设讨论基本微元产生的场矢量的性质。     

Ab Initio Study on the Isomerization and Dehydrogenation of Methylnitrene

The ab initio calculations were performed at the RHF/4-31G level with the reaction pathways of the iso-merization and dehydrogenation of methylnitrene by the intrinsic reaction coordinate method. The results show that the transformation from methylnitrene to methylenimine would be very easy. This accountes for the experimental fact that one couldn' t find the methylnitrene, but only obtained the methylenimine in the pyrolysis of methyl azide. The mode-selective study reveals the reaction coordinates (IRC) of isomerization and dehydrogenation of methylnitrene are associated with the molecular deformation mode of 1191 cm-1 and the methyl group unsymmetrical stretch mode, respectively. The coupling between normal coordinates is favourable to select the reaction channel of isomerization.     

长波长大应变InGaAs/InGaAsP分布反馈激光器的材料生长与器件制备

采用低压金属有机化合物气相沉积法(LP-MOCVD)生长并制作了1.6—1.7μm大应变InGaAs/InGaAsP分布反馈激光器.采用应变缓冲层技术，得到质量良好的大应变InGaAs/InP体材料.器件采用了4个大应变的量子阱，加入了载流子阻挡层改善器件的温度特性.1.66μm和1.74μm未镀膜的3μm脊型波导器件阈值电流低(小于15mA)，输出功率高(100mA时大于14mW).从10—40℃，1.74μm激光器的特征温度T₀=57K，和1.55μm InGaAsP分布反馈激光器的特征温度相当. 关键词： MOCVD InGaAs/InGaAsP 应变量子阱 分布反馈激光器     

A regioselective synthesis of 3-benzazepinones via intramolecular hydroamidation of acetylenes

Synthesis of 3-benzazepinones by palladium-catalyzed intramolecular addition of amides to alkynes is achieved. Phenyl acetylenes substituted in the ortho-position with tethered amide functionality were prepared in a few steps from readily available starting materials. It was found that 5% Pd(OAc)₂(PPh₃)₂ and KOH most effectively promoted cyclization. When the tethered group is an acetamide and an alkyl substituent is on the acetylene unit, regioselective 3-benzazepinone synthesis could be achieved in good yields.     

Regioselectivity in the ene-reaction of singlet oxygen with cyclic alkenes: photooxygenation of methyl-substituted 1,4-cyclohexadiene derivatives

The photooxygenation of the 1-methyl-, 2,3-dimethyl-, and 1,4-dimethylcyclohexa-1,4-dienes, which are readily available through Birch reduction, yielded the corresponding ene-products. The formed endocyclic dienes were trapped by the addition of singlet oxygen to give the corresponding bicyclic endoperoxy hydroperoxides. In the case of 1-methylcyclohexa-1,4-diene and 1,4-dimethylcyclohexa-1,4,-diene, the cis-effect determined the product distribution. Photooxygenation of 2,3-dimethylcyclohexa-1,4-dienes gave mainly exocyclic olefin, which was attributed to the lowered rotational barrier of the methyl group and increased reactivity of the methyl groups.     

Structural studies of Cr-doped mullite derived from single-phase precursors

Cr-doped mullites were prepared from single-phase precursors containing up to 9.60 wt% Cr₂O₃ using a sol-gel technique followed by thermal treatment. Particle induced X-ray emission spectroscopy and X-ray powder diffraction were used to characterize the samples. Mullites were orthorhombic, space group Pbam. Cr doping caused the increase of unit-cell parameters. Strongest expansion was noticed along c-axis followed by a and b (Δc/c=0.089, Δa/a=0.061, Δb/b=0.045% per mole Cr₂O₃). A second phase, namely θ-(Al,Cr)₂O₃, was revealed by XRD in the sample containing 9.60 wt% Cr₂O₃. The structure of mullites was refined by the Rietveld method, location of Cr³⁺ was performed by the EPR spectroscopy. At low chromium doping level (Cr₂O₃ content less than ∼5 wt%) Cr³⁺ ions were substituted for Al³⁺ in the AlO₆ octahedra of the mullite structure (M1 site). For higher doping level, Cr³⁺ ions were additionally substituted for Al³⁺ in the AlO₆ octahedra of the second phase [θ-(Al,Cr)₂O₃ at 1400 °C, or α-(Al,Cr)₂O₃ at 1600 °C] which segregated in the system. Substitution of Cr³⁺ for Al³⁺ on M1 site in the mullite structure resulted in increase of average distances in (M1)O₆ octahedron and decrease of average distances in T*O₄ tetrahedron, while average distances in TO₄ tetrahedron stayed almost constant.     

位移和速度反馈的数学模型及实现方法

本文提出了位移和速度同时反馈的数学模型 .并给出了位移和速度反馈的实现方法 ,该方法用传统的差动变压器实现了位移和速度的同时反馈     

Surface free energy of CrNx films deposited using closed field unbalanced magnetron sputtering

CrN_x thin films have attracted much attention for semiconductor IC packaging molding dies and forming tools due to their excellent hardness, thermal stability and non-sticking properties (low surface free energy). However, few data has been published on the surface free energy (SFE) of CrN_x films at temperatures in the range 20-170 °C. In this study CrN_x thin films with CrN, Cr(N), Cr₂N (and mixture of these phases) were prepared using closed field unbalanced magnetron sputtering at a wide range of Cr⁺² emission intensity. The contact angles of water, di-iodomethane and ethylene glycol on the coated surfaces were measured at temperatures in the range 20-170 °C using a Dataphysics OCA-20 contact angle analyzer. The surface free energy of the CrN_x films and their components (e.g., dispersion, polar) were calculated using the Owens-Wendt geometric mean approach. The influences of CrN_x film surface roughness and microstructure on the surface free energy were investigated by atomic force microscopy (AFM) and X-ray diffraction (XRD), respectively. The experimental results showed that the lowest total SFE was obtained corresponding to CrN at temperature in 20 °C. This is lower than that of Cr(N), Cr₂N (and mixture of these phases). The total SFE, dispersive SFE and polar SFE of CrN_x films decreased with increasing surface temperature. The film roughness has an obvious effect on the SFE and there is tendency for the SFE to increase with increasing film surface roughness.     

西咪替丁的应用进展

综述了近年来国内外报道的H2受体抗拮剂－西咪替丁应用于除治疗消化性溃疡以外的其他疾病的进展情况，以其为临床用药提供参考。     

Conversion of single-stranded oligonucleotides into cloned duplexes and its consecutive application to short artificial genes.

A general method to convert single-stranded, chemically synthesized oligonucleotides into cloned duplexes is described. Oligonucleotides supplied with 3'-terminal extensions that are complementary to 3'-protruding ends obtained by certain restriction enzymes can be cloned either directly or with the help of an adapter molecule into double-stranded vectors. Two methods have also been developed for consecutive cloning applications. According to these methods, the synthetic oligonucleotides (and their enzymatically prepared complementary strands) are joined, one after the other, inside a cloning vector, each joining requiring one cloning step. Synthetic genes are thus built up from oligonucleotides corresponding to only one strand of the DNA. The sequential assembly of the cloned duplex takes place in the 5' to 3' direction. Each oligonucleotide is supplied with a four-nucleotide-long 3'-terminal extension, but this sequence is eliminated when the joining takes place, leaving no limiting sequence between the oligonucleotides. The two consecutive cloning methods, the adapter and the polycloning site methods, are illustrated by the assembly of short artificial genes.