Use of monomer fraction data in the parametrization of association theories

Association theories such as the CPA (cubic-plus-association), NRHB (non-random hydrogen bonding) equations of state and the various variants of SAFT (statistical associating fluid theory) have been extensively applied to phase equilibrium calculations. Such models can also be used for estimating the monomer fraction of hydrogen bonding compounds and their mixtures. Monomer fraction data are obtained from spectroscopic measurements and they are available for a few compounds such as pure water and alcohols as well as for some alcohol–alkane and similar mixtures. These data are useful for an understanding of the capabilities and limitations of association models. The purpose of this work is two-fold: (i) to compare the performance of three models, CPA, NRHB and sPC-SAFT, in predicting the monomer fraction of water, alcohols and mixtures of alcohol-inert compounds and (ii) to investigate whether “improved” model parameters can be obtained if monomer fraction data are included in the parameter estimation together with vapor pressures and liquid densities. The expression “improved” implies parameters which can represent several pure compound properties as well as monomer fraction data for pure compounds and mixtures. The accuracy of experimental monomer fraction data is discussed, as well as the role of monomer fraction data in clarifying which association scheme should be used in these equations of state. The results reveal that the investigated association models (CPA, sPC-SAFT and NRHB) can predict, at least qualitatively correct, monomer fractions of associating compounds and mixtures. Only, small differences are observed between the models. In addition, it has been shown that, using a suitable association scheme, a single set of parameters can describe satisfactorily vapor pressures, liquid densities and monomer fractions of water and alcohols. The 4C scheme is the best choice for water, while for methanol there is small difference between the 2B and 3B association schemes.     

Near infrared spectroscopy of stearic acid adsorbed on montmorillonite

The adsorption of stearic acid on both sodium montmorillonites and calcium montmorillonites has been studied by near infrared spectroscopy complimented with infrared spectroscopy. Upon adsorption of stearic acid on Ca–Mt additional near infrared bands are observed at 8236 cm^?1 and is assigned to an interaction of stearic acid with the water of hydration. Upon adsorption of the stearic acid on Na–Mt, the NIR bands are now observed at 5671, 5778, 5848 and 5912 cm^?1 and are assigned to the overtone and combination bands of the CH fundamentals. Additional bands at 4177, 4250, 4324, 4337, 4689 and 4809 cm^?1 are attributed to CH combination bands resulting from the adsorption of the stearic acid. Stearic acid is used as a model molecule for adsorption studies. The application of near infrared spectroscopy to the study of this adsorption proved most useful.     

Microwave synthesis and spectroscopic characterization of manganese oxalate nanocrystals

The microwave synthesis of MnC₂O₄·2H₂O nanoparticles was performed through the thermal double decomposition of oxalic acid dihydrate (C₂H₂O₄·2H₂O) and Mn(OAc)₂·4H2O solutions using a CATA-2R microwave reactor. Structural characterization was performed using X-ray diffraction (XRD), particle size and shape were analyzed using transmission electron microscopy (TEM). The chemical in the structures was investigated using electron paramagnetic resonance (EPR) as well as optical absorption spectra and near-infrared (NIR) spectroscopies. The nanocrystals produced with this method were pure and had a distorted rhombic octahedral structure.     

Self-organized dot patterns on Si surfaces during noble gas ion beam erosion

The erosion of target materials with energetic ions can lead to the formation of patterns on the surface. During low-energy (?2000 eV) noble gas (Ne⁺, Ar⁺, Kr⁺, Xe⁺) ion beam erosion of silicon surfaces dot patterns evolve on the surface. Dot structures form at oblique ion incidence of 75° with respect to surface normal, with simultaneous sample rotation, at room temperature. The lateral ordering of dots increases while the dot size remains constant with ion fluence, leading to very well ordered dot patterns for prolonged sputtering. Depending on ion beam parameters, dot nanostructures have a mean size from 25 nm up to 50 nm, and a mean height up to 15 nm. The formation of dot patterns depends on the ion/target mass ratio and on the ion energy. The temporal evolution and the lateral ordering of these nanostructures is studied using scanning force microscopy (AFM).     

Effect of an inhibitor on high-speed turbulent flames and the transition to detonation

The influence of an inhibitor (CF₃Br or Halon 1301) on the propagation of high-speed turbulent flames, quasi-detonations and the transition to detonation has been investigated for methane-air, propane-air and acetylene-air mixtures. The experiments are carried out in a 13 m tube (15 cm diameter) filled with regularly spaced orifice plates (blockage ratio of 0.39) to ensure rapid flame acceleration. In all cases, the addition of the inhibitor reduces the turbulent flame velocity and extinguishes the flame with sufficient inhibitor concentration (2.7% and 7.5% for methane-air and propane-air, respectively). For acetylene-air mixtures, the quasi-detonation speed is progressively reduced with increasing inhibitor concentration and eventually causes the failure of the quasi-detonation and transition back to a fast turbulent flame. The inhibitor also narrows the propagation limits in all cases. To elucidate the inhibition mechanism, detailed modelling of both the turbulent flame structure as well as the chemical kinetics are required.     

Enantiotopos‐Selective CH Oxygenation Catalyzed by a Supramolecular Ruthenium Complex

Spirocyclic oxindoles undergo an enantioselective oxygenation reaction (nine examples; e.r. up to 97:3) upon catalysis by a chiral ruthenium porphyrin complex (1 mol %). The catalyst exhibits a lactam ring, which is responsible for substrate association through hydrogen bonds, and an active ruthenium center, which is in a defined spatial relationship to the oxygenation substrate. DFT calculations illustrate the perfect alignment of the active site with the reactive C? H bond and suggest—in line with the kinetic isotope effect—an oxygen rebound mechanism for the reaction.     

Amorphous Silicon: New Insights into an Old Material

Amorphous silicon is synthesized by treating the tetrahalosilanes SiX₄ (X=Cl, F) with molten sodium in high boiling polar and non‐polar solvents such as diglyme or nonane to give a brown or a black solid showing different reactivities towards suitable reagents. With regards to their technical relevance, their stability towards oxygen, air, moisture, chlorine‐containing reaction partners RCl (R=H, Cl, Me) and alcohols is investigated. In particular, reactions with methanol are a versatile tool to deliver important products. Besides tetramethoxysilane formation, methanolysis of silicon releases hydrogen gas under ambient conditions and is thus suitable for a decentralized hydrogen production; competitive insertion into the MeO?H versus the Me?OH bond either yields H‐ and/or methyl‐substituted methoxy functional silanes. Moreover, compounds, such as Me_nSi(OMe)_4?n (n=0–3) are simply accessible in more than 75 % yield from thermolysis of, for example, tetramethoxysilane over molten sodium. Based on our systematic investigations we identified reaction conditions to produce the methoxysilanes Me_nSi(OMe)_4?n in excellent (n=0:100 %) to acceptable yields (n=1:51 %; n=2:27 %); the yield of HSi(OMe)₃ is about 85 %. Thus, the methoxysilanes formed might possibly open the door for future routes to silicon‐based products.     

Surface modification of alumina nanofibres for the selective adsorption of alachlor and imazaquin herbicides

The effective removal of pollutants using a thermally and chemically stable substrate that has controllable absorption properties is a goal of water treatment. In this study, the surfaces of thin alumina (γ-Al(2)O(3)) nanofibres were modified by the grafting either of two organosilane agents, 3-chloro-propyl-triethoxysilane (CPTES) and octyl-triethoxysilane (OTES). These modified materials were then trialed as absorbents for the removal of two herbicides, alachlor and imazaquin from water. The formation of organic groups during the functionalisation process established super hydrophobic sites on the surfaces of the nanofibres. This super hydrophobic group is a kind of protruding adsorption site which facilitates the intimate contact with the pollutants. OTES grafted substrate were shown to be more selective for alachlor while imazaquin selectivity is shown by the CPTES grafted substrate. Kinetics studies revealed that imazaquin was rapidly adsorbed on CPTES-modified surfaces. However, the adsorption of alachlor by OTES grafted surface was achieved more slowly.     

Minimising reversion, using seawater and magnesium chloride, caused by the dissolution of tricalcium aluminate hexahydrate

The increase in pH and aluminium concentration after the neutralisation of bauxite refinery residues is commonly known as reversion. This investigation reports the extent of reversion in synthetic supernatant liquor and possible methods to reduce reversion. This work is based on bauxite refinery residues produced from alumina refineries, where reversion is a real life situation in neutralised refinery residues. Tricalcium aluminate hexahydrate, a common phase in bauxite refinery residues, has been found to cause reversion. It has been established that reductions in both pH and aluminium from the seawater neutralisation process are due to the formation of 'Bayer' hydrotalcite Mg(7)Al(2)(OH)(18)(CO(3)(2-),SO(4)(2-))·xH(2)O. This is the primary mechanism involved in the removal of aluminium from solution. Increasing the volume of seawater used for the neutralisation process minimises the extent of reversion for both synthetic supernatant liquor and red mud slurry. The addition of MgCl(2)·6H(2)O also showed a reduction in reversion and confirmed that the decrease in aluminium and hydroxyl ions is due to the formation of Bayer hydrotalcite and not simply a dilution effect.