时频方法分析长骨中的超声导波及皮质骨厚度

超声导波在长骨中传播时,接收信号中含有相互叠加的多个导波模式。本文提出将希尔伯特-黄变换(HHT)用于分析叠加的多模式导波信号,将其分解成许多单个独立的模式,然后对分解出的模式求得其对应频率下的群速度,并与短时傅里叶变换所得的结果进行比较。通过与理论计算结果比较,可得到长骨皮质骨的厚度。研究结果表明,实验得到的厚度与实际厚度一致。说明通过测量导波模式的速度可以评价皮质骨的厚度,也说明HHT方法是一种识别叠加多模式导波信号的有效方法。     

Amyloid Aggregates Arise from Amino Acid Condensations under Prebiotic Conditions

Current theories on the origin of life reveal significant gaps in our understanding of the mechanisms that allowed simple chemical precursors to coalesce into the complex polymers that are needed to sustain life. The volcanic gas carbonyl sulfide (COS) is known to catalyze the condensation of amino acids under aqueous conditions, but the reported di‐, tri‐, and tetra‐peptides are too short to support a regular tertiary structure. Here, we demonstrate that alanine and valine, two of the proteinogenic amino acids believed to have been among the most abundant on a prebiotic earth, can polymerize into peptides and subsequently assemble into ordered amyloid fibers comprising a cross‐β‐sheet quaternary structure following COS‐activated continuous polymerization of as little as 1 mm amino acid. Furthermore, this spontaneous assembly is not limited to pure amino acids, since mixtures of glycine, alanine, aspartate, and valine yield similar structures.     

超声导波评价长骨骨折的仿体实验研究

定量超声评价长骨骨折已成为近年来的研究热点之一,超声导波模式转换理论可被应用于长骨骨折状况的评价。采用三维时域有限差分法分析骨折长骨中导波模式转换的基本规律,提取模式转换定量评价参数;进而结合亚克力管仿体实验,分析不同裂纹程度下导波模式的转换情况。仿真与仿体实验表明,导波模式能量参数与裂纹程度具有很好的相关性,可用于评价长骨骨折状况。     

The topical isoflavonoid NV-07alpha reduces solar-simulated UV-induced suppression of Mantoux reactions in humans

UV radiation suppresses delayed-type hypersensitivity responses to intradermally injected tuberculin purified protein derivative in Mantoux-positive individuals. The effect of the topically administered isoflavonoid NV-07alpha, a synthetic derivative of the isoflavonoid equol, on UV-induced suppression of Mantoux reactions was assessed in 18 healthy Mantoux-positive volunteers. A single, fixed dose of solar-simulated UV radiation was delivered to the volunteers' lower backs. Different concentrations of NV-07alpha or its vehicle were applied to different sites within the irradiated field immediately after UV exposure and again 24 h later. Forty-eight hours after irradiation, Mantoux testing was performed at both the irradiated sites and adjacent, unirradiated sites. The intensity of Mantoux reactions was measured 72 h later with a reflectance erythema meter and by measuring the diameter of each reaction. Although lower concentrations of NV-07alpha (0.5 and 2 mM) did not prevent UV immunosuppression, 4 mM NV-07alpha partially but significantly attenuated UV-induced suppression of Mantoux-induced erythema. Minimal erythema doses were also determined for sites treated with NV-07alpha or its vehicle immediately after UV exposure. NV-07alpha had no significant effects on UV erythema. We conclude that 4 mM NV-07alpha prevented the suppressive effects of UV radiation on Mantoux responses in humans but did not affect UV-induced erythema at the concentrations used.     

纳米尺度CeO2在多相催化反应中的形貌效应

CeO2的催化性能不仅与粒子大小有关,而且与其形貌密切相关. 本文分析了CeO2的纳米结构和氧化还原特性,综述了CeO2在催化反应中的形貌效应,着重介绍了CeO2的结构和形貌对CO氧化、水气变换和乙醇水蒸气重整制氢以及二元醇脱水反应活性的影响.     

《硅光电池特性》实验教学探索和实践

为了更好地培养全校本科生的创新思维和动手实践能力,探索了适合九零后学生的教学方法。针对实验中存在的一些问题,引导学生积极思考,找到一些快速完成实验并且大大降低仪器损耗率的实验技巧,实现学生、教师、学校三方共赢的目标。     

Enhancement of the micro mechanical basis for local approach cleavage models

The present study is concerned with the investigation of the micro mechanisms of micro defect nucleation in bainitic steels in order to provide an enhanced basis for probabilistic cleavage models. By a micro mechanical modelling of the cleavage initiation process the effects and the interactions of the relevant parameters can be identified. For this purpose Representative Volume Elements (RVE) of the micro structure are utilised, accounting for both, the grain structure as well as the brittle particles at the grain boundaries. The RVE's are loaded based on the local mechanical field quantities determined numerically at the cleavage origins of different fracture mechanics specimens. (© 2012 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim)     

Co3O4纳米立方体的可控合成及其CO氧化反应性能

在乙醇和三乙胺的混合溶液中,采用溶剂热法制备了尺寸为10 nm的Co₃O₄立方体. 考察了钴盐前驱体和溶解氧对Co₃O₄纳米立方体结构的影响规律,通过对合成过程中不同阶段产物的结构分析和表征,提出了Co₃O₄纳米立方体的形成机制是溶解再结晶的过程. 将所制备的Co₃O₄纳米立方体在200 ℃焙烧处理后,尺寸和形貌均可保持稳定,但400 ℃焙烧后,变为球形纳米粒子. 这种主要暴露{100}晶面的Co₃O₄纳米立方体催化CO氧化反应的活性低于纳米粒子({111}晶面),验证了四氧化三钴纳米材料在CO氧化反应中的晶面效应.