Gas permeation of fullerene‐dispersed poly(1‐trimethylsilyl‐1‐propyne) membranes

Homogeneously fullerene‐dispersed membranes were prepared under the conditions in which a 10 wt % poly(1‐trimethylsilyl‐1‐propyne) solution containing 0.5 wt % fullerene was dried under a reduced pressure of 50 cmHg at 100 °C. UV‐vis spectra and microscopic observations of the fullerene membranes indicated that the fullerene was homogeneously dispersed in the membranes. The permeability coefficients of 1‐butene were found to be higher than those of n‐butane in the fullerene membranes, although the permeability coefficients of olefin gases were nearly equal to those of paraffin gases having the same number of carbon in poly(1‐trimethylsilyl‐1‐propyne) membranes containing no fullerene. Pressure dependence of permeability coefficients was clearly observed for the permeation of carbon dioxide, ethylene, ethane, 1‐butene, and n‐butane through the fullerene membranes, while no significant dependence was found for poly(1‐trimethylsilyl‐1‐propyne) membranes except for the permeation of 1‐butene and n‐butane. The pressure dependence of the permeability was explained by the dual‐mode sorption model. © 2000 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 38: 1749–1755, 2000     

Europium-sensitized luminescence determination of oxytetracycline in catfish muscle

An europium-sensitized time-resolved luminescence (TRL) method was developed to determine oxytetracycline (OTC) in cultivated catfish muscle. Extraction of OTC from fish muscle was performed with pH 4.0 ethylenediaminetetraacetic acid (EDTA)-McIlvaine buffer and clean up with hydrophilic-lipophilic balanced copolymer solid phase extraction (SPE) cartridges. The eluate was used without further concentration for TRL measurement in pH 9.0 micellar tris(hydroxylmethyl)aminomethane (TRIS) buffer. Cetyltrimethylammonium chloride (CTACl) was used as surfactant and EDTA as a co-ligand. The excitation and emission wavelengths were set at 388 and 615 nm, respectively. The linear dynamic range was 0-1000 ng g⁻¹ (R²=0.9995). The recovery was 92-112% in the fortification range of 50-200 ng g⁻¹ and the limits of detection (LOD) ranged from 3 to 7 ng g⁻¹. Incurred catfish samples were used to demonstrate the performance of the method around 100 ng g⁻¹, the European Union maximum residue level.     

Hybridization Gap and Dresselhaus Spin Splitting in EuIr4In2Ge4

EuIr₄In₂Ge₄ is a new intermetallic semiconductor that adopts a non‐centrosymmetric structure in the tetragonal ${I\bar 42m}$ space group with unit cell parameters a=6.9016(5) Å and c=8.7153(9) Å. The compound features an indirect optical band gap E_g=0.26(2) eV, and electronic‐structure calculations show that the energy gap originates primarily from hybridization of the Ir 5d orbitals, with small contributions from the Ge 4p and In 5p orbitals. The strong spin–orbit coupling arising from the Ir atoms, and the lack of inversion symmetry leads to significant spin splitting, which is described by the Dresselhaus term, at both the conduction‐ and valence‐band edges. The magnetic Eu²⁺ ions present in the structure, which do not play a role in gap formation, order antiferromagnetically at 2.5 K.     

Simulations of calcite crystallization on self-assembled monolayers

This paper presents simulations of calcium carbonate ordering in contact with self-assembled monolayers. The calculations use potential-based molecular dynamics to model the crystallization of calcium carbonate to calcite expressing both the (00.1) and (01.2) surfaces. The effect of monolayer properties: ionization; epitaxial matching; charge density; and headgroup orientation on the crystallization process are examined in detail. The results demonstrate that highly charged surfaces are vital to stimulate ordering and crystallization. Template directed crystallization requires charge epitaxy between both the crystal surface and the monolayer. The orientation of the headgroup appears to make no contribution to the selection of the crystal surface.     

Gas transport in TiO2 nanoparticle-filled poly(1-trimethylsilyl-1-propyne)

Titanium dioxide (TiO₂) nanoparticles were dispersed via solution processing in poly(1-trimethylsilyl-1-propyne) (PTMSP) to form nanocomposite films. Nanoparticle dispersion was investigated using atomic force microscopy and transmission electron microscopy. At low-particle loadings, nanoparticles were dispersed individually and in nanoscale aggregates. At high-particle loadings, some nanoparticles formed micron-sized aggregates. The gas transport and density exhibited a strong dependence on nanoparticle loading. At low-TiO₂ loadings, the composite density was similar to or slightly higher than that predicted by a two-phase additive model. However, at particle loadings exceeding approximately 7 nominal vol.%, the density was markedly lower than predicted, suggesting that the particles induced the creation of void space within the nanocomposite. For example, when the TiO₂ nominal volume fraction was 0.35, the polymer/particle composite density was 40% lower than expected based on a two-phase additive model for density. At low-nanoparticle loading, light gas permeability was lower than that of the unfilled polymer. At higher nanoparticle loadings, light gas permeability (i.e., CO₂, N₂, and CH₄) increased to more than four times higher than in unfilled PTMSP. At most, selectivity changed only slightly with particle loading.     

Fingerprint analysis of thermolytic decarboxylation of tryptophan to tryptamine catalyzed by natural oils

A number of N,N-dialkylated tryptamines show psychoactive properties in man which resulted in a renewed interest in psychopharmacological research. Attempts to manufacture these derivatives are increasing within a clandestine environment, where literature procedures are adapted and information is exchanged on the Internet. One such example is based on the thermolytic decarboxylation of tryptophan to tryptamine as the precursor to psychoactive derivatives. This procedure was proposed to make use of household solvents such as turpentine substitute and white spirit to facilitate decarboxylation. Discussions on websites also suggested the catalytic use of natural oils in order to accelerate these reactions. In this research, the analytical characterization of this preparation procedure was carried out using gas chromatography-ion trap single and tandem stage mass spectrometry in electron and chemical ionization mode that led to the identification of previously unreported 1-mono and 1,1-disubstituted tetrahydro-beta-carboline (THBCs) by-products. The tryptamine product and several THBC by-products were determined quantitatively and a "fingerprint" analysis of the crude products allowed for the differentiation between the essential oil catalysts involved as indicated by the presence of tetrahydro-beta-carbolines and their imine intermediates.     

Exciplex and excimer molecular probes: detection of conformational flip in a myo-inositol chair

2-O-tert-Butyldimethylsilyl-4,6-bis-O-pyrenoyl-myo-inositol-1,3,5-orthoformate (6) and 2-O-tert-butyldimethylsilyl-4-O-[4-(dimethylamino)benzoyl]-6-O-pyrenoyl-myo-inositol-1,3,5-orthoacetate (10) adopt conformationally restricted unstable chairs with five axial substituents. In the symmetrical diester 6, the two pi-stacked pyrenoyl groups are electron acceptor-donor partners, giving a strong intramolecular excimer emission. In the mixed ester 10, the pyrenoyl group is the electron acceptor and the 4-(dimethylamino)benzoyl ester is the electron donor, giving a strong intramolecular exciplex emission. The conformation of the mixed ester 10 was assessed using 1H NMR spectroscopy (1H-NOESY) and computational studies. which showed the minimum inter-centroid distance between the two aromatic systems to be approximately 3.9 A. Upon addition of acid, the orthoformate/orthoacetate trigger in 6 and 10 was cleaved, which caused a switch of the conformation of the myo-inositol ring to the more stable penta-equatorial chair, leading to separation of the aromatic ester groups and loss of excimer and exciplex fluorescence, respectively. This study provides proof of principle for the development of novel fluorescent molecular probes.     

Molecular simulation and experimental study of substituted polyacetylenes: fractional free volume, cavity size distributions and diffusion coefficients

Glassy, disubstituted acetylene-based polymers exhibit extremely high gas permeabilities and high vapor/gas selectivities, which is quite unusual for conventional glassy polymers such as polysulfone. Diffusion coefficients of poly[1-phenyl-2-[p-(trimethylsilyl)phenyl]acetylene] (PTMSDPA) and poly[diphenylacetylene] (PDPA) were obtained using both molecular simulation and experimental techniques. PTMSDPA, a disubstituted glassy acetylene-based polymer, exhibits higher diffusivity than its desilylated analogue, PDPA. Simulation results are in good agreement with experimental data. Cavity size (free volume) distributions of both polymers are also obtained using an energetic-based algorithm (in't Veld et al., J. Phys. Chem. B 2000, 104, 12028) developed recently. Larger cavities in PTMSDPA contribute to its higher diffusivity, and higher permeability.