Transmission of structure-borne sound from a beam into an infinite plate

An analytical study of transmission of structure-borne sound from a semi-infinite beam into an infinite, isotropic plate is presented. The beam is assumed to carry a torsional, a quasi-longitudinal and bending wave and the transmission is obtained with the help of the admittances of the beam and the plate. The analysis is restricted to the case of low frequencies but is otherwise general; thus due regard is given not only to the bending wave of the plate but also to the other propagating waves and to the local reactions. An interesting result from the study is that a bending wave on the beam will transfer a substantial part of its power into quasi-longitudinal and transverse waves in the plate, especially if the plate is thin compared with the beam. This is thought to be a factor that is important and not so easily quantifiable in the analysis of a complex structure. The local reactions on the other hand are of small importance for the power transmission from a torsional and quasi-longitudinal wave on the beam but may be important for the transmission of a bending wave, especially if the Young's modulus of the beam is larger than that of the plate.     

Hydrogels from a water-soluble zwitterionic polythiophene: dynamics under pH change and biomolecular interactions observed using quartz crystal microbalance with dissipation monitoring

The water-soluble zwitterionic polythiophene, poly(3-((S)-5-amino-5-carboxyl-3-oxapentyl)-2,5-thiophene) hydrochloride (POWT), is a conjugated polyelectrolyte (CPE) with properties well suited for biochip applications. CPEs readily form hydrogels when exposed to water-based buffer solutions or biomolecule solutions. In this work, we used in situ quartz crystal microbalance with dissipation (QCM-D) monitoring to collect information on the interaction between POWT films exposed to buffers with different pH and POWT/DNA chains. Our data show that POWT swells significantly when exposed to low-pH buffers, such as pH 4 acetate, this is seen as an increase in thickness and decrease in viscosity obtained via a Voight-based modeling of combined f and D QCM-D measurements. The magnitude of thickness and viscosity change upon changing from a pH 10 carbonate buffer to pH 4 acetate is 100% increase in thickness and 50% decrease in viscosity. The response of the hydrogel under pH change is well correlated with fluorescence data from POWT films on glass. The state of the hydrogel is important during interaction with biomolecules; illustrated by the observation that a swollen CPE hydrogel adsorbs a higher amount of DNA than a compacted one. In agreement with previous results, the QCM-D data confirmed that the POWT/DNA hydrogel sense complementary DNA specifically and with negligible binding of noncomplementary DNA. These results are important for efficient constructions of biochips in water environments using this class of materials.     

Synthesis and characterisation of Gd2O3 nanocrystals functionalised by organic acids

Nanocrystals of Gd2O3 have been prepared by various methods, using, e.g., trioctylphosphine oxide (TOPO), diethylene glycol (DEG) or glycine. The crystalline particles were of sizes 5 to 15 nm. Different carboxylic acids, e.g., oleic acid or citric acid, were adsorbed onto the surface of the particles made with DEG. IR measurements show that the molecules coordinate to the Gd2O3 surface via the carboxylate group in a bidentate or bridging manner. The organic-acid/particle complexes were characterised by XRPD, TEM, FTIR, Raman, and XPS.     

A CNDO/2 calculation on stilbene

The equilibrium conformations of trans- and cis-stilbene and the rotational barrier between the two isomers were calculated using the CNDO/2 method. The results for the equilibrium angles and distances are in good agreement with experimental data. However, according to the calculations the phenyl rings would have a nearly free rotation which is only limited by steric hindrance. This result obviously deviates from the current view. The results are discussed in relation to previous theoretical and experimental evidence.

---

Zusammenfassung Die Gleichgewichtskonformation von trans- und cis-Stilben und die Rotationsbarriere zwischen zwei Isomeren wurde nach der CNDO/2-Methode berechnet. Die Ergebnisse in bezug auf die Geometrie stimmen mit experimentellen Daten gut überein, die Rotationsbarriere für die Drehung der Phenylringe dagegen ist praktisch Null.

---

Résumé La méthode CNDO/2 a été employée pour calculer les conformations d'équilibre du trans- et du cis-stilbène ainsi que la barrière de rotation entre ces deux isomères. Angles d'équilibre et distances calculés sont en bon accord avec les données expérimentales. Cependant les calculs indiquent que les cycles phényles devraient posséder une rotation libre soumise seulement à l'empêchement stérique. Ce résultat s'écarte de l'opinion courante. Les résultats sont discutés en relation avec les données théoriques et expérimentales antérieures.

---

---

This work was supported by grant No 2741-4 from The Swedish Natural Science Research Council and grant No 69-927/U 697 from The Swedish Board for Technical Development.     

Raman spectroscopic studies of terthiophenes for molecular electronics

The effect of thiol and selenol functionalization on the vibrational spectra and photochemical stability of terthiophene based molecular wires was investigated using surface-enhanced Raman scattering (SERS). The molecules were found to exhibit markedly different properties at the silver surface of the SERS substrate, despite having almost identical Raman spectra in solution and in the solid state. In contrast to terthiophene (3T), the bisthiolterthiophene (T3) and biselenol-terthiophene (Se3) molecules were stable against photoinduced structural changes when adsorbed to the metal surface at low concentrations. This indicates that the strong bonds to the silver surface, via S or Se terminal atoms, leads to a rapid decay of photoexcited states. Comparison with ab initio calculations shows that both T3 and Se3 bind with only one of the functional groups to the Ag surface.     

Organocatalytic living ring-opening polymerization of cyclic carbosiloxanes

[reaction: see text] An organocatalytic route to narrowly dispersed poly(carbosiloxanes) of predictable molecular weight and end group fidelity is described. N-Heterocyclic carbenes (NHC) and 1,5,7-triazabicyclo[4.4.0]dec-5-ene (TBD) catalyze the ring opening of cyclic carbosiloxanes. The pK(b) of the catalyst is important in preventing adverse transetherification reactions and obtaining well-defined polymers. Mechanistic studies indicate that hydrogen bonding to TBD or the NHC activates alcohols or silanols for ring-opening reactions.     

Synthesis and evaluation of dihydroimidazolo and dihydrooxazolo ring-fused 2-pyridones—targeting pilus biogenesis in uropathogenic bacteria

Dihydrothiazolo ring-fused 2-pyridones have previously been shown to inhibit pilus assembly in uropathogenic Escherichia coli. Methods have now been developed to synthesize both dihydroimidazolo and dihydrooxazolo ring-fused 2-pyridones. To obtain the nitrogen analogs, Cbz-protected imidazolines were reacted with an acyl-Meldrum's acid derivative under acidic conditions. To prepare the oxygen analogs, a one-pot procedure was developed that allowed synthesis of dihydrooxazolo ring-fused 2-pyridones starting from acylated serine derivatives. After hydrolysis to their corresponding carboxylic acids and lithium carboxylates, biological evaluation revealed that the sulfur could be replaced by an oxygen atom and still maintains the ability to inhibit pilus assembly in uropathogenic E. coli. However, introducing a secondary amine instead of oxygen resulted in a substantial decrease in biological activity.     

A high-throughput multicomponent screening method for diuretics, masking agents, central nervous system (CNS) stimulants and opiates in human urine by UPLC-MS/MS

A simple and rapid multicomponent screening method of 130 substances for direct injections of urine samples has been developed. The fully automated method based on ultra-performance liquid chromatography (UPLC) and tandem mass spectrometry (MS/MS) is used for three different classes of doping agents: diuretics, central nervous system stimulants (CNS stimulants) and opiates. The samples are diluted with buffer containing internal standards (IS) by a pipetting robot system into 96-well plates. Samples are injected on a reversed phase sub 2-microm particle column connected to a fast polarity switching and rapid scanning tandem mass spectrometer with an electrospray interface. The software used to evaluate the results produced reports containing a small-sized window for each component and a data table list with flags to indicate any adverse analytical findings in the sample. The report can also be processed automatically using an application software, which interpret the data and indicate if there is a suspicious sample. One 96-well plate can be analyzed within 16 h.