Functional Dithienopyrazines: Structure-Property Relationships**

Dithienopyrazines are only scarcely used as building blocks in organic electronic materials. Here, we report efficient preparation and investigation of syn- and anti-dithienopyrazines, which were functionalized with triaraylamine units to provide different series of donor-acceptor-donor-type materials. The characterization of the optoelectronic properties resulted in valuable structure-property relationships and allowed for the elucidation of the influence of structural effects such as core structure (syn vs anti), type of substituents (directly arylated vs ethynylated aryl), and substitution pattern (α,α’- vs β,β’- vs fourfold substitution). Finally, first application of a dithienopyrazine derivative as model for hole-transport materials tailored for organic electronic devices has been realized.     

Mechanochemical Synthesis of 3d Transition‐Metal–1,2,4‐Triazole Complexes as Precursors for Microwave‐Assisted and Thermal Conversion to Coordination Polymers with a High Influence on the Dielectric Properties

The complexes [MCl₂(TzH)₄] (M=Mn ( 1 ), Fe ( 2 ); TzH=1,2,4‐1H‐triazole) and [ZnCl₂(TzH)₂] ( 3 ) have been obtained by mechanochemical reactions of the corresponding divalent metal chloride and 1,2,4‐1H‐triazole. They were successfully used as precursors for the formation of coordination polymers either by a microwave‐assisted reaction or by thermal conversion. For manganese, the conversion directly yielded [MnCl₂TzH] ( 4 ), whereas for the iron‐containing precursor, [FeCl₂TzH] ( 6 ), was formed via the intermediate coordination polymer [FeCl(TzH)₂]Cl ( 5 ). For cobalt, the isotypic polymer [CoCl(TzH)₂]Cl ( 7 ) was obtained, but exclusively by a microwave‐induced reaction directly from CoCl₂. The crystal structures were resolved from single crystals and powders. The dielectric properties were determined and revealed large differences in permittivity between the precursor complexes and the rigid chain‐like coordination polymers. Whereas the monomeric complexes exhibit very different dielectric behaviour, depending on the transition metal, from “low‐k” to “high‐k” with the permittivity ranging from 4.3 to >100 for frequencies of up to 1000 Hz, the coordination polymers and complexes with strong intermolecular interactions are all close to “low‐k” materials with very low dielectric constants up to 50 °C. Therefore, the conversion procedures can be used to deliberately influence the dielectric properties from complex to polymer and for different 3d transition‐metal ions.     

Mechanochemically Induced Conversion of Crystalline Benzamide Polymorphs by Seeding

Benzamide has been known for its polymorphism for almost 200 years. Three polymorphic forms are described. To date, it was only possible to crystallize a metastable form in a mixture together with the thermodynamically most stable form I. A complete transformation of form I into the metastable form III by mechanochemical treatment has been achieved. Catalytic amounts of nicotinamide seeds were used to activate the conversion by mechanochemical seeding. NMR experiments indicated that the nicotinamide molecules were incorporated statistically in the crystal lattice of benzamide form III during the conversion. The transformation pathway was evaluated using in situ powder X‐ray diffraction.     

Phase transition in Tl2TeO3: influence and origin of the thallium lone pair distortion

A new modification of thallium tellurite, beta-Tl(2)TeO(3), has been synthesized by methanolothermal reaction, and its phase transition has been studied by single-crystal X-ray diffraction. At a temperature of 440(10) degrees C an irreversible phase transition from a monoclinic structure (beta-Tl(2)TeO(3): P2(1)/c (No. 14), Z = 4, a = 8.9752(18) A, b = 4.8534(6) A, c = 11.884(2) A, beta = 109.67(2) degrees, V = 487.47(15) A3 at 25 degrees C) to an orthorhombic structure (alpha-Tl(2)TeO(3): Pban (No. 50), Z = 8, a = 16.646(2) A, b = 11.094(2) A, c = 5.2417(8) A, V = 968.0(3) A3 at 25 degrees C) is observed. Both structures are characterized by psi-tetrahedral TeO(3)(2-) anions. In the orthorhombic structure psi-trigonal bipyramidal [TlO(4)] units are found together with psi-tetrahedral [TlO(3)] units whereas in the monoclinic structure the coordination polyhedron around Tl(I) can be best described as a psi-square pyramide, psi-[TlO(4)]. The electronic structure of Tl(2)TeO(3) in both modifications has been studied to explain the influence of the lone pairs. It can be conclusively shown that the minimization of antibonding ns-metal/2p-oxygen interactions is the driving force for "lone pair" distortions which determines the structures of Tl(2)TeO(3).     

Counterion Effect in Cobaltate-Catalyzed Alkene Hydrogenation

We show that countercations exert a remarkable influence on the ability of anionic cobaltate salts to catalyze challenging alkene hydrogenations. An evaluation of the catalytic properties of [Cat][Co(η⁴-cod)₂] (Cat=K ( 1 ), Na ( 2 ), Li ( 3 ), (^Depnacnac)Mg ( 4 ), and N(ⁿBu)₄ ( 5 ); cod=1,5-cyclooctadiene, ^Depnacnac={2,6-Et₂C₆H₃NC(CH₃)}₂CH)]) demonstrated that the lithium salt 3 and magnesium salt 4 drastically outperform the other catalysts. Complex 4 was the most active catalyst, which readily promotes the hydrogenation of highly congested alkenes under mild conditions. A plausible catalytic mechanism is proposed based on density functional theory (DFT) investigations. Furthermore, combined molecular dynamics (MD) simulation and DFT studies were used to examine the turnover-limiting migratory insertion step. The results of these studies suggest an active co-catalytic role of the counterion in the hydrogenation reaction through the coordination to cobalt hydride intermediates.     

Flamelet-Modeling of Inverse Rich Diffusion Flames

An experimental and numerical investigation of a confined laminar inverse diffusion flame (IDF) with pure oxygen as oxidizer and carbon dioxide diluted methane as fuel with a global stoichiometry of partial oxidation processes (equivalence ratio of 2.5) is presented. The present burner setup allows studying both the flame and the post-flame zone in a simplified geometry considering typical operating conditions as found in large-scale gasifiers. This partial oxidation flame setup is characterized by very high temperatures close to the stoichiometric oxidation zone due to oxy-fuel combustion, whereas lower temperatures and slow endothermic post-flame conversion reactions with long residence times are found in the fuel rich post-flame region. The scope of this paper is to investigate different modeling approaches suitable for both regimes by comparing the simulation results to detailed experimental data. Planar OH laser-induced fluorescence (OH-LIF) was performed for measuring the hydroxyl radical in the reaction zone and the results are compared to CFD calculations. Based on this comparison, the necessary level of detail of diffusion flux modeling, which includes Soret and Dufour effects, is analyzed and established. Finally, steady and unsteady non-premixed flamelet approaches based on a single mixture fraction are used in order to study their applicability for both the oxidation and post-flame zone. Significantly different time scales are obtained using different flamelet paths. Their influence on the results is investigated in the steady flamelet and the Lagrangian flamelet approach.     

Visualization of Protein‐Specific Glycosylation inside Living Cells

Protein glycosylation is a ubiquitous post‐translational modification that is involved in the regulation of many aspects of protein function. In order to uncover the biological roles of this modification, imaging the glycosylation state of specific proteins within living cells would be of fundamental importance. To date, however, this has not been achieved. Herein, we demonstrate protein‐specific detection of the glycosylation of the intracellular proteins OGT, Foxo1, p53, and Akt1 in living cells. Our generally applicable approach relies on Diels–Alder chemistry to fluorescently label intracellular carbohydrates through metabolic engineering. The target proteins are tagged with enhanced green fluorescent protein (EGFP). Förster resonance energy transfer (FRET) between the EGFP and the glycan‐anchored fluorophore is detected with high contrast even in presence of a large excess of acceptor fluorophores by fluorescence lifetime imaging microscopy (FLIM).     

An Isoreticular Family of Microporous Metal-Organic Frameworks Based on Zinc and 2-Substituted Imidazolate-4-amide-5-imidate: Syntheses, Structures and Properties

We report on a new series of isoreticular frameworks based on zinc and 2-substituted imidazolate-4-amide-5-imidate (IFP-1-4, IFP=imidazolate framework Potsdam) that form one-dimensional, microporous hexagonal channels. Varying R in the 2-substitued linker (R=Me (IFP-1), Cl (IFP-2), Br (IFP-3), Et (IFP-4)) allowed the channel diameter (4.0-1.7??), the polarisability and functionality of the channel walls to be tuned. Frameworks IFP-2, IFP-3 and IFP-4 are isostructural to previously reported IFP-1. The structures of IFP-2 and IFP-3 were solved by X-ray crystallographic analyses. The structure of IFP-4 was determined by a combination of PXRD and structure modelling and was confirmed by IR spectroscopy and (1) H?MAS and (13) C?CP-MAS?NMR spectroscopy. All IFPs showed high thermal stability (345-400?°C); IFP-1 and IFP-4 were stable in boiling water for 7?d. A detailed porosity analysis was performed on the basis of adsorption measurements by using various gases. The potential of the materials to undergo specific interactions with CO(2) was investigated by measuring the isosteric heats of adsorption. The capacity to adsorb CH(4) (at 298?K), CO(2) (at 298?K) and H(2) (at 77?K) at high pressure were also investigated. In situ IR spectroscopy showed that CO(2) is physisorbed on IFP-1-4 under dry conditions and that both CO(2) and H(2) O are physisorbed on IFP-1 under moist conditions.