Estrogen-induced cholestasis results in a dramatic increase of b-series gangliosides in the rat liver

Hepatic ganglioside composition was investigated in normal and cholestatic Wistar rats. Cholestasis was induced by 17alpha-ethinylestradiol (EE; 5 mg/kg body weight s.c. for 18 days). As compared with controls, the EE administration resulted in severe cholestasis, as indicated by biochemical as well as morphological signs. Gangliosides isolated from the liver tissue were separated by TLC, with resorcinol-HCl detection and densitometric evaluation. As compared with controls, the total hepatic lipid sialic acid content in cholestatic rats was increased almost 2-fold (44.3 +/- 15.2 vs 79.1 +/- 9.0 nmol/g wet weight of liver tissue, p < 0.01). This increase was primarily due to the increase of ganglioside GD1a (3.6 +/- 1.0 vs 11.8 +/- 3.0 nmol/g wet weight of liver tissue, p = 0.001), as well as to the enormous up-regulation of b-series gangliosides GD3 (0.08 +/- 0.03 vs 2.0 +/- 1.2 nmol/g wet weight of liver tissue, p = 0.002), GD1b (0.1 +/- 0.06 vs 5.4 +/- 1.6 nmol/g wet weight of liver tissue, p = 0.002) and GT1b (0.06 +/- 0.03 vs 6.4 +/- 2.6 nmol/g wet weight of liver tissue, p = 0.002). As the majority of gangliosides are concentrated in cell membranes, our findings suggest that dramatic increase of b-series gangliosides might contribute to the protection of hepatocytes against the deleterious effects of cholestasis.     

Stability and repeatability of capillary columns based on porous monoliths of poly(butyl methacrylate-co-ethylene dimethacrylate)

Monolithic poly(butyl methacrylate-co-ethylene dimethacrylate) capillary columns have been prepared via either thermally or photochemically initiated polymerization of the corresponding monomers and the repeatability of their preparation has been explored. Three separate batches of 5 columns each were prepared using thermal and photochemical initiation for a total of 30 columns. All 30 capillary columns were tested in liquid chromatography-electrospray ionisation mass spectrometry mode for the separation of a model mixture of three proteins--ribonuclease A, cytochrome c and myoglobin. Excellent repeatability of retention times was observed for the proteins as evidenced by relative standard deviation (RSD) values of less than 1.5%. Somewhat broader variations with RSD values of up to 10% were observed for the pressure drop in the columns. The stability of retention times was also monitored using a single monolithic column and no significant shifts in either retention times or back pressure was observed in a series of almost 2200 consecutive protein separations.     

Determination of 1-methylhistidine and 3-methylhistidine by capillary and chip electrophoresis with contactless conductivity detection

CE with capacitively coupled contactless detection (C4D) was used to determine 3-methylhistidine (3-MH) and 1-methylhistidine (1-MH). The C4D response to 3-MH was studied in a BGE consisting of 500 mM acetic acid and ammonia at varying concentration and the results were compared with the theory. Complete separation of a model mixture of 3-MH, 1-MH, and histidine (His) was attained in two optimized BGEs, one containing 500 mM HAc, 20 mM NH4OH, and 0.1 % m/v hydroxyethylcellulose (HEC), pH 3.4 (I) and the other consisting of 100 mM morpholinoethanesulfonic acid (MES), 25 mM LiOH, and 0.1 % m/v HEC, pH 5.5 (II). These optimized BGEs were tested in CE/C4D analyses of urine. Promising results were obtained for separation and determination of 3-MH, 1-MH, and His on a silicon microchip, using aluminum strips as the C4D electrodes; the three analytes were baseline-separated within less than 30 s with a separation channel effective length of 38 mm. The LOD were satisfactory and amounted to 26.4 microM for 3-MH and 18.3 microM for 1-MH.     

Electron transfer to protonated beta-alanine N-methylamide in the gas phase: an experimental and computational study of dissociation energetics and mechanisms

Ammonium radicals derived from protonated beta-alanine N-methyl amide (BANMA) were generated by femtosecond collisional electron transfer to gas-phase cations prepared by chemical ionization and electrospray. Regardless of the mode of precursor ion preparation, the radicals underwent complete dissociation on the time scale of 5.15 micros. Deuterium isotope labeling and product analysis pointed out several competitive and convergent dissociation pathways that were not completely resolved by experiment. Ab initio calculations, which were extrapolated up to the CCSD(T)/6-311++G(3df,2p) level of theory, provided the proton affinity and gas-phase basicity of BANMA as PA = 971 kJ mol-1 and GB = 932 kJ mol-1 to form the most stable ion structure 1c+ in which the protonated ammonium group was internally solvated by hydrogen bonding to the amide carbonyl. Ion 1c+ was calculated to have an adiabatic recombination energy of 3.33 eV to form ammonium radical 1c*. The potential energy surface for competitive and consecutive isomerizations and dissociations of 1c* was investigated at correlated levels of theory and used for Rice-Ramsperger-Kassel-Marcus (RRKM) calculations. RRKM unimolecular rate constants suggested that dissociations starting from the ground electronic state of radical 1c* were dominated by loss of an ammonium hydrogen atom. In contrast, dissociations starting from the B excited state were predicted to proceed by reversible isomerization to an aminoketyl radical (1f*). The latter can in part dissociate by N-Calpha bond cleavage leading to the loss of the amide methyl group. This indicates that apparently competitive dissociations observed for larger amide and peptide radicals, such as backbone cleavages and losses of side-chain groups, may originate from different electronic states and proceed on different potential energy surfaces.     

Optimization of a pressurized liquid junction nanoelectrospray interface between CE and MS for reliable proteomic analysis

A pressurized liquid junction nanoelectrospray interface was designed and optimized for reliable on-line CE-MS coupling. The system was constructed as an integrated device for highly sensitive and selective analyses of proteins and peptides with the separation and spray capillaries fixed in a pressurized spray liquid reservoir equipped with the electrode for connection of the electrospray potential. The electrode chamber on the injection side of the separation capillary and the spray liquid reservoir were pneumatically connected by a Teflon tube filled with pressurized nitrogen. This arrangement provided precisely counterbalanced pressures at the inlet and outlet of the separation capillary. The pressure control system was driven by an electrically operated valve and maintained the optimum flow rate for the electrospray stability. All parts of the interface being in contact with the CEBGE, spray liquid and/or sample were made of glass or Teflon. The use of these materials minimized the electrospray chemical noise often caused by plastic softeners or material degradation. During optimization, the transfer of the separated zones between the separation and electrospray capillaries was monitored by UV absorbance and contactless conductivity detectors placed at the outlet of the separation capillary and inlet of the electrospray tip, respectively. This arrangement allowed independent monitoring of the effects of pressure, CE voltage and geometry of the liquid junction on the spreading and dilution of the separated zones after passage through the interface.     

Localized Mixed‐Valence and Redox Activity within a Triazole‐Bridged Dinucleating Ligand upon Coordination to Palladium

The new dinucleating redox‐active ligand ( L^H4 ), bearing two redox‐active NNO‐binding pockets linked by a 1,2,3‐triazole unit, is synthetically readily accessible. Coordination to two equivalents of Pd^II resulted in the formation of paramagnetic (S= ) dinuclear Pd complexes with a κ²‐N,N′‐bridging triazole and a single bridging chlorido or azido ligand. A combined spectroscopic, spectroelectrochemical, and computational study confirmed Robin–Day Class II mixed‐valence within the redox‐active ligand, with little influence of the secondary bridging anionic ligand. Intervalence charge transfer was observed between the two ligand binding pockets. Selective one‐electron oxidation allowed for isolation of the corresponding cationic ligand‐based diradical species. SQUID (super‐conducting quantum interference device) measurements of these compounds revealed weak anti‐ferromagnetic spin coupling between the two ligand‐centered radicals and an overall singlet ground state in the solid state, which is supported by DFT calculations. The rigid and conjugated dinucleating redox‐active ligand framework thus allows for efficient electronic communication between the two binding pockets.     

Temperature effect on optical properties of the cuticle of Lucilia sericata

Optical properties of the spinal cuticle taken from the species of Lucilia sericata are studied by the reflectance measurements and their structural properties by scanning electron microscopy. The multilayer structure of the cuticle has been confirmed from the scanning electron micrographs. The temperature sensitivity of the multilayer structure is documented by the modification of optical properties in a heating process. The heating process and the local heating using the focused laser beam causes the local changes of the optical properties what is finally demonstrated by the structural color shift of the reflected spectra.     

Fabrication of porous polymer monoliths covalently attached to the walls of channels in plastic microdevices

UV-initiated grafting of plastic tubes and microfluidic chips with ethylene diacrylate followed by the preparation of porous polymer monoliths has been studied. The first step affords a thin grafted layer of polymer with a multiplicity of pendent double bonds that are then used in the second step for covalent attachment of the monolith to the wall. As clearly seen on scanning electron micrographs, this procedure prevents the formation of voids at the monolith-channel interface a problem that has always plagued approaches involving bulk polymerization in nontreated channels due to the shrinkage of the monolith during the polymerization process and its lack of compatibility with the material of the device. Irradiation with UV light through a photomask allows precise patterning specifying both the area subjected to surface modification and the location of the monolith within specific areas of the device.     

Extending the array of crosslinkers suitable for the preparation of polymethacrylate-based monoliths

The in situ preparation of monolithic capillary columns comprising copolymers of butyl methacrylate with ethylene dimethacrylate, diethylene glycol dimethacrylate, triethylene glycol dimethacrylate, and pentaerythritol tetraacrylate using thermal polymerization within 250 microm ID capillaries and their application for micro-HPLC separations of proteins has been studied. For all crosslinkers, optimization of the porogenic mixture consisting of 1-propanol and 1,4-butanediol yielded monoliths with pore sizes above 1 microm suitable for rapid separations at low back pressure. Very good separations were achieved for a protein mixture consisting of ribonuclease A, cytochrome c, myoglobin, and ovalbumin with all tested columns.