Injection molded microfluidic chips featuring integrated interconnects

An injection molding process for the fabrication of disposable plastic microfluidic chips with a cycle time of 2 min has been designed, developed, and implemented. Of the sixteen commercially available grades of cyclo-olefin copolymer (COC) that were screened for autofluorescence and transparency to ultraviolet (UV) light, Topas 8007 x 10 was identified as the most suitable for production. A robust solid metal mold insert defining the microfluidic channels was rapidly microfabricated using a process that significantly reduces the time required for electroplating. No wear of the insert was observed even after over 1000 cycles. The chips were bonded by thermal fusion using different bonding conditions. Each condition was tested and its suitability evaluated by burst pressure measurements. The COC microfluidic chips feature novel, integrated, reversible, standardized, ready-to-use interconnects that enable operation at pressures up to 15.6 MPa, the highest value reported to date. The suitability of these UV transparent, high pressure-resistant, disposable devices was demonstrated by in situ preparation of a high surface area porous polymer monolith within the channels.     

Latex-functionalized monolithic columns for the separation of carbohydrates by micro anion-exchange chromatography

A novel stationary phase for micro ion chromatography has been prepared by coating a porous poly(butyl methacrylate-co-ethylene dimethacrylate-co-2-acrylamido-2-methyl-1-propanesulfonic acid) monolith with quaternary amine-functionalized latex particles via simple electrostatic binding. This stationary phase enabled the separation of saccharides in the mobile phase with a high-pH value consisting of aqueous ammonia solution in anion-exchange mode using evaporative light scattering for detection. Effects of both porous properties of the monolithic stationary phase and chromatographic conditions on the separation ability were studied. Under optimized conditions, an efficient separation of seven saccharides was achieved in less than 10 min. The stationary phase also enables the separation of saccharides obtained by the enzymatic hydrolysis of corn starch.     

Tetrathiomolybdates of nickel

Summary The complexes [Ni(en)₃]MoS₄, [Ni(dien)₂]MoS₄ and [Ni(phen)₂(MoS₄)]·2H₂O (en = ethylenediamine, dien = diethylenetriamine, phen = 1,10-phenanthroline) were prepared. On the basis of their magnetochemical and spectral properties the compounds can be characterized as octahedral nickel(II) complexes. The complexes were also studied by c.v. Chemical oxidation of [Ni(en)₃]MoS₄ affords [Ni(en)MoS₄]₂SO₄; this complex has been characterized by i.r. and e.p.r. spectroscopy and by magnetic measurements.     

A convenient route to diazepines by intramolecular cyclisation of carbonylazides

The appropriate substituted carbonylazides I treated with warm acetic acid give the corresponding acetamide IV or the cyclic lactam VI . This is a convenient route to 10,11-Dihydro-5H-pyrrolo[1,2-a][1,4]-benzodiazepin-11-one and 10,11-Dihydro-4H-thieno[2,3-e]pyrrolo[1,2-a][1,4]diazepin-10-one.     

Bonding Properties of a Novel Inorganometallic Complex, Ru(SnPh(3))(2)(CO)(2)(iPr-DAB) (iPr-DAB = N,N'-Diisopropyl-1,4-diaza-1,3-butadiene), and its Stable Radical-Anion, Studied by UV-Vis, IR, and EPR Spectroscopy, (Spectro-) Electrochemistry, and Density Functional Calculations

Ru(SnPh(3))(2)(CO)(2)(iPr-DAB) was synthesized and characterized by UV-vis, IR, (1)H NMR, (13)C NMR, (119)Sn NMR, and mass (FAB(+)) spectroscopies and by single-crystal X-ray diffraction, which proved the presence of a nearly linear Sn-Ru-Sn unit. Crystals of Ru(SnPh(3))(2)(CO)(2)(iPr-DAB).3.5C(6)H(6) form in the triclinic space group P&onemacr; in a unit cell of dimensions a = 11.662(6) ?, b = 13.902(3) ?, c = 19.643(2) ?, alpha = 71.24(2) degrees, beta = 86.91(4) degrees, gamma = 77.89(3) degrees, and V = 2946(3) ?(3). One-electron reduction of Ru(SnPh(3))(2)(CO)(2)(iPr-DAB) produces the stable radical-anion [Ru(SnPh(3))(2)(CO)(2)(iPr-DAB)](*-) that was characterized by IR, and UV-vis spectroelectrochemistry. Its EPR spectrum shows a signal at g = 1.9960 with well resolved Sn, Ru, and iPr-DAB (H, N) hyperfine couplings. DFT-MO calculations on the model compound Ru(SnH(3))(2)(CO)(2)(H-DAB) reveal that the HOMO is mainly of sigma(Sn-Ru-Sn) character mixed strongly with the lowest pi orbital of the H-DAB ligand. The LUMO (SOMO in the reduced complex) should be viewed as predominantly pi(H-DAB) with an admixture of the sigma(Sn-Ru-Sn) orbital. Accordingly, the lowest-energy absorption band of the neutral species will mainly belong to the sigma(Sn-Ru-Sn)-->pi(iPr-DAB) charge transfer transition. The intrinsic strength of the Ru-Sn bond and the delocalized character of the three-center four-electron Sn-Ru-Sn sigma-bond account for the inherent stability of the radical anion.     

Photo-induced ligand substitution at a remote site via electron transfer in a porphyrin-appended rhenium carbonyl supermolecule

The photochemical and electrochemical properties of a Zn-porphyrin appended rhenium(I) tricarbonyl bipyridine 3-Me-pyridine complex have been investigated; visible-light sensitisation of electron transfer results in ligand substitution at a site remote from the chromophore.     

Microscopy and single molecule detection in photosynthesis

Progress in various fields of microscopy techniques brought up enormous possibilities to study the photosynthesis down to the level of individual pigment-protein complexes. The aim of this review is to present recent developments in the photosynthesis research obtained using such highly advanced techniques. Three areas of microscopy techniques covering optical microscopy, electron microscopy and scanning probe microscopy are reviewed. Whereas the electron microscopy and scanning probe microscopy are used in photosynthesis mainly for structural studies of photosynthetic pigment-protein complexes, the optical microscopy is used also for functional studies.     

Response of a Si-diode-based device to fast neutrons

Semiconductor devices based on a Si-detector are frequently used for charged particle's detection; one application being in the investigation of cosmic radiation fields. From the spectra of energy deposition events in such devices, the total energy deposited by the radiation in silicon can be derived. This contribution presents the results of studies concerning the response of this type of detector to fast neutrons. First, the spectrum of energy deposition was established in fast neutron radiation fields with average energies from 0.5 to 50 MeV. It was found that these spectra vary significantly with the neutron energy. The comparison with the spectra registered in photon beams permitted an estimation of the part of energy deposited that could be attributed to neutrons. It was found that this part increases rapidly with neutron energy. The possibilities to use this type of detector for neutron detection and dosimetry for radiation protection are analysed and discussed.     

A Pencil Graphite Electrode In Situ Modified by Monovalent Copper: a Promising Tool for the Determination of Methylxanthines

A pencil graphite electrode (PeGE) exhibits a promising tool for the electrochemical analysis of xanthine (Xan) and its N‐methyl derivatives (1‐, 3‐, 7‐ and 9‐mXan). The changes in their level in blood, serum, urine, as products of purine catabolism, can indicate the development of some diseases. Sensitivity‐enhanced voltammetric detection of mXans was achieved by forming of complex with Cu(I) and application of elimination procedure. The Cu(I)‐mXan complex was identified by means of titration of electrochemically produced cuprous ions by mXan. Our approach enables separation of overlapped mXan oxidation signals. Based on the obtained results, we found that the effect of methyl group position on the xanthine skeleton was significant and it was also discussed.     

Coupling protein complex analysis to peptide based proteomics

Proteolysis is a central component of most proteomics methods. Unfortunately much of the information relating to the structural diversity of proteins is lost during digestion. This paper describes a method in which the native proteome of yeast was subjected to preliminary fractionation by size exclusion chromatography (SEC) prior to trypsin digestion of SEC fractions and reversed phase chromatography-mass spectral analysis to identify tryptic peptides thus generated. Through this approach proteins associated with other proteins in high molecular mass complexes were recognized and identified. A focus of this work was on the identification of Hub proteins that associate with multiple interaction partners. A critical component of this strategy is to choose methods and conditions that maximize retention of native structure during the various stages of analysis prior to proteolysis, especially during cell lysis. Maximum survival of protein complexes during lysis was obtained with the French press and bead-beater methods of cell disruption at approximately pH 8 with 200 mM NaCl in the lysis buffer. Structure retention was favored by higher ionic strength, suggesting that hydrophobic effects are important in maintaining the structure of protein complexes. Recovery of protein complexes declined substantially with storage at any temperature, but storage at -20°C was best when low temperature storage was necessary. Slightly lower recovery was obtained with storage at -80°C while lowest recovery was achieved at 4°C. It was concluded that initial fractionation of native proteins in cell lysates by SEC prior to RPC-MS/MS of tryptic digests can be used to recognize and identify proteins in complexes along with their interaction partners in known protein complexes.