Ion excitation in a linear quadrupole ion trap with an added octopole field

Modeling of ion motion and experimental investigations of ion excitation in a linear quadrupole trap with a 4% added octopole field are described. The results are compared with those obtained with a conventional round rod set. Motion in the effective potential of the rod set can explain many of the observed phenomena. The frequencies of ion oscillation in the x and y directions shift with amplitude in opposite directions as the amplitudes of oscillation increase. Excitation profiles for ion fragmentation become asymmetric and in some cases show bistable behavior where the amplitude of oscillation suddenly jumps between high and low values with very small changes in excitation frequency. Experiments show these effects. Ions are injected into a linear trap, stored, isolated, excited for MS/MS, and then mass analyzed in a time-of-flight mass analyzer. Frequency shifts between the x and y motions are observed, and in some cases asymmetric excitation profiles and bistable behavior are observed. Higher MS/MS efficiencies are expected when an octopole field is added. MS/MS efficiencies (N(2) collision gas) have been measured for a conventional quadrupole rod set and a linear ion trap with a 4% added octopole field. Efficiencies are chemical compound dependent, but when an octopole field is added, efficiencies can be substantially higher than with a conventional rod set, particularly at pressures of 1.4 x 10(-4) torr or less.     

Acrylonitrile polymerization by Cy3PCuMe and (Bipy)2FeEt2

Cy(3)PCuMe (1) undergoes reversible ligand redistribution at low temperature in solution to form the tight ion pair [Cu(PCy(3))(2)][CuMe(2)] (3). The structure of 3 was assigned on the basis of (i) the stoichiometry of the 1 = 3 equilibrium, (ii) the observation of a triplet for the PCy(3) C1 (13)C NMR resonance due to virtual coupling to two (31)P nuclei, and (iii) reverse synthesis of 1 by combining separately generated Cu(PCy(3))(2)(+) and CuMe(2)(-) ions. Complex 1 and [Cu(PCy(3))(2)][PF(6)] (5) coordinate additional PCy(3) to form (Cy(3)P)(2)CuMe and [Cu(PCy(3))(3)][PF(6)], respectively, while 3 does not. Complex 1, free PCy(3), and (bipy)(2)FeEt(2) (2) each initiate the polymerization of acrylonitrile. In each case, the polyacrylonitrile contains branches that are characteristic of an anionic polymerization mechanism. The major initiator in acrylonitrile polymerization by 1 is PCy(3), which is liberated from 1. A transient iron hydride complex is proposed to initiate acrylonitrile polymerization by 2.     

Determination of Mn,Fe, Cu,Zn, and Pb in particulate matter,raw and final materials of a brick factory by radionuclide X-ray fluorescence analysis

Radionuclide X-ray fluorescence method with a Si/Li semiconductor detector and²³⁸Pn exciting source was used in the study of Mn, Fe, Cu, Zn, and Pb content of solid emissions, raw and final materials of a brick factory. From the point of view of metal content, the working environment of the brick factory is safe for workers.     

RECOVERY OF Escherichia coli K-12 FROM NEAR-ULTRAVIOLET RADIATION-INDUCED MEMBRANE DAMAGE

Abstract A wild-type Escherichia coli K-12 strain was irradiated with broad-band near-ultraviolet radiation (from Black-Light Blue fluorescent lamps) and after holding at 37°C for various times in a complex recovery medium, was assessed for viability on either complex medium (YENB) or minimal medium containing a high inorganic salt content. A near-ultraviolet radiation fluence was used which reduced the surviving fraction to approximately 10% when assessing for viability on the complex medium plates. A near-ultraviolet radiation induced sensitivity to inorganic salt was observed which was largely recoverable by holding treated cells in a complex recovery medium. The majority of the recovery process occurred in the initial 2 h post-irradiation holding period. No inhibition of the recovery process was produced by adding chloramphenicol (40 μg/m l ) or penicillin G (11 units/m l ) to the recovery medium, indicating that neither protein synthesis nor cell wall synthesis, respectively, were required for recovery. However, by adding bacitracin, an antibiotic which acts in part by inhibiting membrane synthesis, to the recovery medium, an effect on recovery from salt sensitivity was observed. At the concentrations of bacitracin used (0.6 and 0.2 units/m l ), little or no effect was observed on unirradiated cells, but both concentrations decreased the amount of recovery of irradiated cells. These results demonstrate that recovery from near-ultraviolet radiation-induced salt sensitivity occurs, it is independent of cell growth and the effect of bacitracin suggests that membrane synthesis may be required for recovery.     

Method Development for the Speciation of Chromium in River and Industrial Wastewater Using GFAAS

A simple, sensitive and inexpensive method for the speciation of Cr(VI) and Cr(III) in river and industrial wastewater was developed, optimized and validated. Samples were collected, filtered and then chromium species were determined in the filtrate. In the filtrate, total Cr was determined directly by Graphite Furnace Atomic Absorption Spectrometry (GFAAS). A portion of the filtered sample was buffered to pH 6.4, extracted with Amberlite LA-2/MIBK and finally Cr(VI) was determined in the organic extract and Cr(III) in the aqueous phase using GFAAS. The method was evaluated by analysis of the certified reference material, CRM 544, and good accuracy was obtained. The limit of detection for Cr(VI) and Cr(tot)/Cr(III) was found to be 0.30 and 0.08 µg L⁻¹, respectively, and a precision expressed as relative standard deviation of better than 11% was achieved for nine replicates. A number of water samples from the Tinishu Akaki River, Ethiopia, and wastewater samples from a chemical plant in Germany, were analysed. In addition to the GFAAS method, Cr(tot) was also determined using ICP-MS (in CRM 544, lyophilized water, and Tinishu Akaki River water samples) and Cr(tot) and Cr(VI) using UV-VIS spectrophotometry (in CRM 544 and industrial wastewater samples). Good agreement between the different methods was found.     

A hexa-peri-hexabenzocoronene cyclophane: an addition to the toolbox for molecular electronics

Cyclophanes with the largest-to-date polycyclic aromatic hydrocarbon (hexa-peri-hexabenzocoronene, HBC) to be entrained in such a structural motif are reported. The two disks are covalently captured by intermolecular ring-closing olefin metathesis of dienes in good yield. DSC, optical microscopy, and WAXD show the new cyclophanes to self-assemble to thermotropic columnar liquid crystal mesophases similar to monomeric analogues. Solution spectroscopic studies reveal that the two disks within a single unit lie face-to-face, with a small average lateral offset. Self-assembly into two-dimensional crystals at a solid-liquid interface was visualized by STM, and the electrical properties of single molecules were assessed by scanning tunneling spectroscopy revealing a diode-like behavior which is similar to that previously reported for single HBC disks, laying the groundwork for future electrical interrogations of dynamic molecular complexes.     

Detection and measurement of noncoincidence between the principal axes of the g-matrix and zero-field splitting tensor using multifrequency powder EPR spectroscopy: application to cis-[(NH(3))(2)Pt(1-MeU)(2)Cu(H(2)O)(2)](SO(4)) x 4.5H(2)O (1-MeU = monoanion of 1-methyluracil)

Multifrequency continuous wave EPR spectra (4-34 GHz) on a powder of the title compound are consistent with a spin-triplet state. This arises from interaction between centrosymmetrically related pairs of copper(II) ions in the solid. The spectra at all frequencies have been simulated with a single set of spin-Hamiltonian parameters. The results show that there is noncoincidence between the principal axes of the g-matrices on each copper center and those of the zero-field splitting (D) tensor. This noncoincidence is a single rotation of 33 degrees +/- 2 degrees. The parameters from the powder spectra have been verified by a subsequent single-crystal EPR study which yielded the spin-Hamiltonian parameters g(XX) = 2.074, g(YY) = 2.093, g(ZZ) = 2.385, D(XX) = +/-0.0228 cm(-1), D(YY) = +/-0.0211 cm(-1), D(ZZ) = -/+0.0439 cm(-1) with Euler angles of alpha = 179 degrees, chi = 33.4 degrees, and gamma = 328 degrees. Analysis of the zero-field splitting tensor in terms of exchange indicates that the interaction between the pairs of copper(II) ions is almost entirely dipolar in origin. This study shows that multifrequency EPR spectroscopy on powders, coupled with spectrum simulation, can detect and measure noncoincidence between the principal axes of the g-matrix and zero-field splitting tensor, and does not necessarily require the presence of metal hyperfine interactions.     

3-Deaza-2′-deoxyadenosine: Synthesis via 4-(methylthio)-1H-imidazo[4,5-c]pyridine 2′-deoxyribonucleosides and properties of oligonucleotides

The synthesis of 4-(methylthio)-1H-imidazo[4,5-c]pyridine 2′-deoxy-β-D -ribonucleosides 2 and 9 and the conversion of the N¹-isomer 2 into the 2′,3′-didehydro-2′,3′-dideoxyribonucleoside 3a or (via 7 ) 3-deaza-2′-deoxyadenosine ( 1 ) is described. Phosphonate building blocks of 1 were employed in solid-phase synthesis of self-complementary base-modified oligonucleotides. Their properties were studied with regard to duplex stability and hydrolysis by the restriction enzyme Eco RI.     

Squeezing the [Cu-OH...H2O-Cu]3+ bridge by cryptate encapsulation

Treatment of cryptand L(1) with Cu(II) generates a H3O2(-)-bridged dicopper(II) cryptate, 2, where the guest anion has responded to steric constraint by a significant shortening of the O-O distance to 2.325(9) A; computational optimization at the B3LYP/6-31(d) level suggests that the bridging O-H...O H-bond is bent (approximately 157 degrees) but that the barrier to interchange of the bridging H atom is low (<4 kJ mol(-1)). This cryptate, rather than the [Cu2L(1)muCN]3+ species recently claimed to derive from cleavage of the C-C bond of the solvent, is the product of acetonitrile recrystallization of the initially formed reaction product, 1.