Method Development for the Speciation of Chromium in River and Industrial Wastewater Using GFAAS

A simple, sensitive and inexpensive method for the speciation of Cr(VI) and Cr(III) in river and industrial wastewater was developed, optimized and validated. Samples were collected, filtered and then chromium species were determined in the filtrate. In the filtrate, total Cr was determined directly by Graphite Furnace Atomic Absorption Spectrometry (GFAAS). A portion of the filtered sample was buffered to pH 6.4, extracted with Amberlite LA-2/MIBK and finally Cr(VI) was determined in the organic extract and Cr(III) in the aqueous phase using GFAAS. The method was evaluated by analysis of the certified reference material, CRM 544, and good accuracy was obtained. The limit of detection for Cr(VI) and Cr(tot)/Cr(III) was found to be 0.30 and 0.08 µg L⁻¹, respectively, and a precision expressed as relative standard deviation of better than 11% was achieved for nine replicates. A number of water samples from the Tinishu Akaki River, Ethiopia, and wastewater samples from a chemical plant in Germany, were analysed. In addition to the GFAAS method, Cr(tot) was also determined using ICP-MS (in CRM 544, lyophilized water, and Tinishu Akaki River water samples) and Cr(tot) and Cr(VI) using UV-VIS spectrophotometry (in CRM 544 and industrial wastewater samples). Good agreement between the different methods was found.     

A hexa-peri-hexabenzocoronene cyclophane: an addition to the toolbox for molecular electronics

Cyclophanes with the largest-to-date polycyclic aromatic hydrocarbon (hexa-peri-hexabenzocoronene, HBC) to be entrained in such a structural motif are reported. The two disks are covalently captured by intermolecular ring-closing olefin metathesis of dienes in good yield. DSC, optical microscopy, and WAXD show the new cyclophanes to self-assemble to thermotropic columnar liquid crystal mesophases similar to monomeric analogues. Solution spectroscopic studies reveal that the two disks within a single unit lie face-to-face, with a small average lateral offset. Self-assembly into two-dimensional crystals at a solid-liquid interface was visualized by STM, and the electrical properties of single molecules were assessed by scanning tunneling spectroscopy revealing a diode-like behavior which is similar to that previously reported for single HBC disks, laying the groundwork for future electrical interrogations of dynamic molecular complexes.     

Detection and measurement of noncoincidence between the principal axes of the g-matrix and zero-field splitting tensor using multifrequency powder EPR spectroscopy: application to cis-[(NH(3))(2)Pt(1-MeU)(2)Cu(H(2)O)(2)](SO(4)) x 4.5H(2)O (1-MeU = monoanion of 1-methyluracil)

Multifrequency continuous wave EPR spectra (4-34 GHz) on a powder of the title compound are consistent with a spin-triplet state. This arises from interaction between centrosymmetrically related pairs of copper(II) ions in the solid. The spectra at all frequencies have been simulated with a single set of spin-Hamiltonian parameters. The results show that there is noncoincidence between the principal axes of the g-matrices on each copper center and those of the zero-field splitting (D) tensor. This noncoincidence is a single rotation of 33 degrees +/- 2 degrees. The parameters from the powder spectra have been verified by a subsequent single-crystal EPR study which yielded the spin-Hamiltonian parameters g(XX) = 2.074, g(YY) = 2.093, g(ZZ) = 2.385, D(XX) = +/-0.0228 cm(-1), D(YY) = +/-0.0211 cm(-1), D(ZZ) = -/+0.0439 cm(-1) with Euler angles of alpha = 179 degrees, chi = 33.4 degrees, and gamma = 328 degrees. Analysis of the zero-field splitting tensor in terms of exchange indicates that the interaction between the pairs of copper(II) ions is almost entirely dipolar in origin. This study shows that multifrequency EPR spectroscopy on powders, coupled with spectrum simulation, can detect and measure noncoincidence between the principal axes of the g-matrix and zero-field splitting tensor, and does not necessarily require the presence of metal hyperfine interactions.     

3-Deaza-2′-deoxyadenosine: Synthesis via 4-(methylthio)-1H-imidazo[4,5-c]pyridine 2′-deoxyribonucleosides and properties of oligonucleotides

The synthesis of 4-(methylthio)-1H-imidazo[4,5-c]pyridine 2′-deoxy-β-D -ribonucleosides 2 and 9 and the conversion of the N¹-isomer 2 into the 2′,3′-didehydro-2′,3′-dideoxyribonucleoside 3a or (via 7 ) 3-deaza-2′-deoxyadenosine ( 1 ) is described. Phosphonate building blocks of 1 were employed in solid-phase synthesis of self-complementary base-modified oligonucleotides. Their properties were studied with regard to duplex stability and hydrolysis by the restriction enzyme Eco RI.     

Squeezing the [Cu-OH...H2O-Cu]3+ bridge by cryptate encapsulation

Treatment of cryptand L(1) with Cu(II) generates a H3O2(-)-bridged dicopper(II) cryptate, 2, where the guest anion has responded to steric constraint by a significant shortening of the O-O distance to 2.325(9) A; computational optimization at the B3LYP/6-31(d) level suggests that the bridging O-H...O H-bond is bent (approximately 157 degrees) but that the barrier to interchange of the bridging H atom is low (<4 kJ mol(-1)). This cryptate, rather than the [Cu2L(1)muCN]3+ species recently claimed to derive from cleavage of the C-C bond of the solvent, is the product of acetonitrile recrystallization of the initially formed reaction product, 1.     

Charge transfer and electron backdonation in metallofullerenes encapsulating NSc3

Orbital interaction analysis is employed to understand the complex charge transfer mechanism operative in endohedral metallofullerenes of composition NSc₃@C_n (n = 68, 78). This phenomenon combines substantial electron transfer from the core to the cage with electron backdonation, involving the interaction between the occupied orbitals of the negatively charged cage and the unoccupied d orbitals of the positively charged core. This electron backdonation differs fundamentally from conventional orbital hybridization, which takes place primarily between the HOMO of the metal core and the LUMO of the fullerene cage. These findings imply the pronounced stability of NSc₃@C_n (n = 68, 78), especially for NSc₃ encapsulated in the non-IPR C₆₈ enclosure, as experimentally established.     

Synthesis, structure, and dynamics of six-membered metallacoronands and metallodendrimers of iron and indium

In the reaction of the N-substituted diethanolamines (H(2)L(1-3)) (1-3) with calcium hydride followed by addition of iron(III) or indium(III) chloride, the iron wheels [Fe(6)Cl(6)(L(1))(6)] (4) and [Fe(6)Cl(6)(L(2))(6)] (6) or indium wheels [In(6)Cl(6)(L(1))(6)] (5), [In(6)Cl(6)(L(2))(6)] (8) and [In(6)Cl(6)(L(3))(6)] (9) were formed in excellent yields. Exchange of the chloride ions of 6 by thiocyanate ions afforded [Fe(6)(SCN)(6)(L(2))(6)] (7). Whereas the structures of 4, 5 and 7 were determined unequivocally by single-crystal X-ray analyses, complexes 8 and 9 were characterised by NMR spectroscopy. Contrary to what is normally presumed, the scaffolds of six-membered metallic wheels are not generally rigid, but rather undergo nondissociative topomerisation processes. This was shown by variable temperature (VT) (1)H NMR spectroscopy for the indium wheel [In(6)Cl(6)(L(1))(6)] (5) and is highlighted for the enantiotopomerisation of one indium centre [ 1/6[S(6)-5]<==>[1/6[S(6)-5']]. The self-assembly of metallic wheels, starting from diethanolamine dendrons, is an efficient strategy for the convergent synthesis of metallodendrimers.     

Vilsmeier formylation of 5,10,15-triphenylcorrole: expected and unusual products

5,10,15-Triphenylcorrole (1) reacts with the Vilsmeier reagent (POCl(3)/DMF) to give the corresponding 3-formyl derivative 3 as the major product. The regioselectivity of the reaction was proven by X-ray crystallography and only traces of the 2-formyl isomer were observed. A more polar product is also observed and this compound becomes the major product when an excess of DMF is used for the preparation of the Vilsmeier reagent, while the formation of the 3-formyl isomer is almost completely suppressed. X-ray crystallography allowed us to identify this compound as the fully substituted N-ethane bridged derivative 4, formed from the attack of the Vilsmeier reagent at the inner core of the macrocycle. This compound is unique among porphyrinoid macrocycles, and further confirms the peculiarity of corrole chemistry.     

A facile three-step synthesis of (±)-crispine A via an acyliminium ion cyclisation

A high yielding cyclisation of the readily available N-(4,4-diethoxybutyl)-2-(3,4-dimethoxyphenyl)acetamide to 8,9-bis(methyloxy)-2,3,6,10b-tetrahydropyrrolo[2,1-a]isoquinolin-5(1H)-one is described. The latter can be reduced with either AlH₃ or BH₃ to (±)-crispine A in an overall yield of 55%.