A reinvestigation of asymmetric induction in diels-alder reactions to chiral acrylates.

The chiral induction in the Diels-Alder addition $\text{1}$ → $\text{2}$, assessed reliably by ¹⁹F-NMR-spectroscopy of the endo-esters $\text{4}$, varied between 47 - 93% in favor of the 2-(R)-adducts $\text{2}$ depending on the auxiliary chiral group and the Lewis-acid catalyst.     

Performance of nonrelativistic and quasi-relativistic hybrid DFT for the prediction of electric and magnetic hyperfine parameters in 57Fe Mössbauer spectra

57Fe electric and magnetic hyperfine parameters were calculated for a series of 10 iron model complexes, covering a wide range of oxidation and spin states. Employing the B3LYP hybrid method, results from nonrelativistic density functional theory (DFT) and quasi-relativistic DFT within the zero-order regular approximation (ZORA) were compared. Electron densities at the iron nuclei were calculated and correlated with experimental isomer shifts. It was shown that the fit parameters do not depend on a specific training set of iron complexes and are, therefore, more universal than might be expected. The nonrelativistic and quasi-relativistic electron densities gave fit parameters of similar quality; the ZORA densities are only shifted by a factor of 1.32, upward in the direction of the four-component Dirac-Fock value. From a correlation of calculated electric field gradients and experimental quadrupole splittings, the value of the 57Fe nuclear quadrupole moment was redetermined to a value of 0.16 barn, in good agreement with other studies. The ZORA approach gave no additional improvement of the calculated quadrupole splittings in comparison to the nonrelativistic approach. The comparison of the calculated and measured 57Fe isotropic hyperfine coupling constants (hfcc's) revealed that both the ZORA approach and the inclusion of spin-orbit contributions lead to better agreement between theory and experiment in comparison to the nonrelativistic results. For all iron complexes with small spin-orbit contributions (high-spin ferric and ferryl systems), a distinct underestimation of the isotropic hfcc's was found. Scaling factors of 1.81 (nonrelativistic DFT) and 1.69 (ZORA) are suggested. The calculated 57Fe isotropic hfcc's of the remaining model systems (low-spin ferric and high-spin ferrous systems) contain 10-50% second-order contributions and were found to be in reasonable agreement with the experimental results. This is assumed to be the consequence of error cancellation because g-tensor calculations for these systems are of poor quality with the existing DFT approaches. Excellent agreement between theory and experiment was found for the 57Fe anisotropic hfcc's. Finally, all of the obtained fit parameters were used for an application study of the [Fe(H2O)6]3+ ion. The calculated spectroscopic data are in good agreement with the Mossbauer and electron paramagnetic resonance results discussed in detail in a forthcoming paper.     

Screening, library-assisted identification and validated quantification of 23 benzodiazepines, flumazenil, zaleplone, zolpidem and zopiclone in plasma by liquid chromatography/mass spectrometry with atmospheric pressure chemical ionization

A liquid chromatographic/mass spectrometric assay with atmospheric pressure chemical ionization (LC/APCI-MS) is presented for fast and reliable screening and identification and also for precise and sensitive quantification in plasma of the 23 benzodiazepines alprazolam, bromazepam, brotizolam, camazepam, chlordiazepoxide, clobazam, clonazepam, diazepam, flunitrazepam, flurazepam, desalkylflurazepam, lorazepam, lormetazepam, medazepam, metaclazepam, midazolam, nitrazepam, nordazepam, oxazepam, prazepam, temazepam and tetrazepam, triazolam, their antagonist flumazenil and the benzodiazepine BZ1 (omega 1) receptor agonists zaleplone, zolpidem and zopiclone. It allows confirmation of the diagnosis of an overdose situation and monitoring of psychiatric patients' compliance. The analytes were isolated from plasma using liquid-liquid extraction and were separated on a Merck LiChroCART column with Superspher 60 RP Select B as the stationary phase. Gradient elution was performed using aqueous ammonium formate and acetonitrile. After screening and identification in the scan mode using the authors' LC/MS library, the analytes were quantified in the selected-ion monitoring mode. The quantification assay was fully validated. It was found to be selective proved to be linear from sub-therapeutic to over therapeutic concentrations for all analytes, except bromazepam. The corresponding reference levels the assay's accuracy and precision data for all studied substances are listed. The accuracy and precision data were within the required limits with the exception of those for bromazepam. The analytes were stable in frozen plasma for at least 1 month. The validated assay was successfully applied to several authentic plasma samples from patients treated or intoxicated with various benzodiazepines or with zaleplone, zolpidem or zopiclone. It has proven to be appropriate for the isolation, separation, screening, identification and quantification of the drugs mentioned above in plasma for clinical toxicology, e.g. in cases of poisoning, and forensic toxicology, e.g. in cases of driving under the influence of drugs.     

A boxmodel development to study the relationships between the photo-oxidants and the particles formation in the troposphere

The model BAGS (Boxmodel for Aerosol and Gasphase Simulations) has been developed. It is composed of two major modules: the first one describes the system of the chemical reactions in the gaseous phase, the second one calculates the aerosol chemical composition and the dimensional distribution of the particles. The boxmodel has been developed with the introduction of new chemical and physical processes, not previously included, in particular the formation of Secondary Organic Aerosol. The other implemented processes are a module for the dynamic of the particle population, nucleation, coagulation and dry deposition. The last phase of the work has been a check of the BAGS capabilities by a series of tests, that have permitted to compare it with other models (MAPS and MADM). The tests in particular have concerned the aerosol water content prediction, the photochemistry, the condensation of the inorganic compounds and the formation of Secondary Organic Aerosol.     

Perthio- and perseleno-1,3-butadienes, -but-1-ene-3-ynes,and -[3]-cumulenes: one-step syntheses from 1,4-dilithio-1,3-butadiyne

[reaction: see text] Treatment of 1,4-dilithio-1,3-butadiyne (1) with dichalcogenides RSSR or RSeSeR affords dithio- and diseleno-1,3-butadiynes (2, 3), perthio- and perseleno-[3]-cumulenes (4, 5), perthio- and perseleno-1,3-butadienes (6, 7), and/or perthio- and perseleno-but-1-ene-3-ynes (8, 9). The products can be controlled by stoichiometry and temperature, by the presence or absence of oxygen, and by choice of the "R" group. By X-ray crystallography, hexa(methylthio)-1,3-butadiene is highly twisted, with a torsion angle [Phi(CCCC)] of 84.7 degrees and an elongated C(2)-C(3) distance of 1.484(3) A.     

Crystal structure of dicyclohexano-18-crown-6 potassium 2-nitrophenoxide

The first crystal structure of a potassium cation complex with dicyclohexano-18-crown-6 is reported. The potassium 2-nitrophenoxide complex ofsyn-cis-syn dicyclohexano-18-crown-6 crystallizes in the triclinic space group P with cell constantsa=8.604(2),b=10.772(4),C=16.123(5)Å, =73.86(3)°,=77.61(3)°, =82.68(3)° andZ=2 forD _c =1.31 g cm^–3. Least-squares refinement based on 2742 observed reflections led to a final conventionalR value of 0.040. Dicyclohexano-18-crown-6 has the shape of a saddle with the potassium cation sitting at the saddlepoint. The structure of the 2-nitrophenoxide anion is dominanted by the quinoid resonance contributor. Because the complex is devoid of significant intercomplex interactions, it is a prototypical 1:1:1 complex. Supplementary Data relating to this article are deposited with the British Library as Supplementary Publication No. SUP 82043 (26 pages).Now Mrs. K. M. Balo.     

The reactivity of 1,4-dihydronicotinamides towards reduction of 1,1′,1″-trifluoro-acetophenone : influence of methyl substitution on the pyridine ring.

In a series of methyl substituted 1-(2′,6′-dichlorobenzyl)-1,4-dihydronicotinamides those compounds with the methyl α to the pyridine nitrogen are at least one order of magnitude more reactive than the analogues without methyl or methyl on the 5-position.     

Diorganogalliumfluoride. Die Kristallstruktur des Mischkristalls [B(CH2Ph)3]0,92[Ga(CH2Ph)3]0,08 · NCMe

Diorganogallium Fluorides. The Crystal Structure of the Mixed Crystal [B(CH₂Ph)₃]_0.92[Ga(CH₂Ph)₃]_0.08 · NCMe The reaction of GaR₃ with BF₃ · OEt₂ in diethylether leads to the diorganogallium fluorides R₂GaF [R = i-Pr ( 1 ), CH₂Ph ( 2 ), Mes ( 3 )]. Compound 1 is also available by the reaction of i-Pr₂GaBr ( 6 ) with KF at ?20°C in acetonitrile. The by-product B(CH₂Ph)₃, formed together with 2 during the first reaction, crystallizes with ca. 8% Ga(CH₂Ph)₃ in acetonitrile as [B(CH₂Ph)₃]_0.92[Ga(CH₂Ph)₃]_0.08 · NCMe ( 4 ) in the space group P2₁/n with a = 1050.32(7) pm, b = 1159.5(2) pm, c = 1591.6(1) pm and β = 96.931(6)°.     

Classifying wine according to geographical origin via quadrupole-based ICP–mass spectrometry measurements of boron isotope ratios

The potential of quadrupole-based ICP–MS as a tool for B-isotopic analysis of wines and its usefulness in provenance determinations were assessed. A precision of 0.1–0.25% RSD (corresponding to a relative standard deviation of the mean of three replicate measurements of 0.06–0.12%) was sufficient to establish small differences in the B isotope ratios in wines from different geographical origins. Each sample measurement was bracketed by measurements of a standard and mass bias drift correction made by interpolation. Sample preparation was kept to a minimum to avoid possible fractionation. Dilution of the wine samples by a factor of 100 with 0.65% HNO₃ was found to reduce matrix-induced mass discrimination substantially. Wines from three wine-producing regions, Stellenbosch, Robertson, and Swartland, in the Western Cape Province of South Africa, and wines from specific regions in France (Bergerac) and Italy (Valpolicella) were analyzed by ICP–QMS for their B-isotopic compositions. It was concluded that the ¹¹B/¹⁰B ratios can be used to characterize wines from different geographical origins. Average ¹¹B/¹⁰B ratios in red wines from South Africa (Stellenbosch), France (Bergerac), and Italy (Valpolicella) were found to differ by between 0.5 and 1.5%.     

Apparent two-dimensional behavior of TiO2 nanotubes revealed by light absorption and luminescence

Optical absorption and photoluminescence (PL) properties of colloidal TiO(2) nanotubes, produced by the alkali hydrothermal method, were studied at room temperature in the range 300-700 nm. Nanotubes having an internal diameter in the range 2.5-5 nm have very similar optical properties, in contrast to the expected behavior for quasi-1-D systems. This is explained by the complete thermal smearing of all 1-D effects, due to the large effective mass of charge carriers in TiO(2), resulting in an apparent 2-D behavior of TiO(2) nanotubes.