Influence of the loading path on the strength of fiber-reinforced composites subjected to transverse compression and shear

The influence of the loading path on the failure locus of a composite lamina subjected to transverse compression and out-of-plane shear is analyzed through computational micromechanics. This is carried out using the finite element simulation of a representative volume element of the microstructure, which takes into account explicitly fiber and matrix spatial distribution within the lamina. In addition, the actual failure mechanisms (plastic deformation of the matrix and interface decohesion) are included in the simulations through the corresponding constitutive models. Two different interface strength values were chosen to explore the limiting cases of composites with strong or weak interfaces. It was found that failure locus was independent of the loading path for the three cases analyzed (pseudo-radial, compression followed by shear and shear followed by compression) in the composites with strong and weak interfaces. This result was attributed to the fact that the dominant failure mechanism in each material was the same in transverse compression and in shear. Failure is also controlled by the same mechanisms under a combination of both stresses and the failure locus depended mainly on the magnitude of the stresses that trigger fracture rather than in the loading path to reach the critical condition.     

Characterization of the behaviour of flavour microcapsules in cotton fabrics

Nanotechnology processes have recently been introduced into the textile field. One of these processes involves encapsulated nanoparticles or nanoproducts, known as microcapsules. They are available with a wide range of products which confer different properties related to the nature of the encapsulated product. The composition of the wall material determines the release of the product into the fabric and is the object of study in the present work. The behaviour of microencapsulated peppermint was analyzed on cotton fabrics.Different application methods have been tested, impregnation versus bath exhaustion. As impregnation turned out to be the most efficient, some recipes were assayed and the effect of microcapsules on maintenance conditions was evaluated in order to determine the most suitable method with the longest lasting effect on fabrics.The effect of microcapsules is usually measured by the presence of a property such as odour measurements when flavours are encapsulated. The aim of this work is to explain the behaviour of the cotton fabrics with microcapsules bound to their fibers, to determine the relationship between their macroscopic properties and microscopic characteristics. A procedure based in FTIR spectroscopy is also proposed to quantify the presence of microcapsules in the fabrics.IR spectra of the textiles were obtained to determine the presence of microcapsules, which was corroborated by SEM techniques.     

On the Cartan–Jacobson Theorem

The well-known Cartan–Jacobson theorem claims that the Lie algebra of derivations of a Cayley algebra is central simple if the characteristic is not 2 or 3. In this paper we have studied these two cases, with the following results: if the characteristic is 2, the theorem is also true, but, if the characteristic is 3, the derivation algebra is not simple. We have also proved that in this last case, there is a unique nonzero proper seven-dimensional ideal, which is a central simple Lie algebra of type A₂, and the quotient of the derivation algebra modulo this ideal turns out to be isomorphic, as a Lie algebra, to the ideal itself. The original motivation of this work was a series of computer-aided calculations which proved the simplicity of derivation algebras of Cayley algebras in the case of characteristic not 3. These computations also proved the existence of a unique nonzero proper ideal (which turns out to be seven-dimensional) in the algebra of derivations of split Cayley algebras in characteristic 3.     

Gold ultra-microelectrode arrays: application to the steady-state voltammetry of hydroxide ion in aqueous solution.

Gold ultra-microelectrode arrays are used to explore the electrochemical oxidation of hydroxide ions and are shown to be analytical useful. Two types of ultra-microelectrode arrays are used; the first consist of 256 individual electrodes of 5 microm in radius, 170 of which are electrochemically active in a cubic arrangement which are separated from their nearest neighbour by a distance of 100 microm. The second array compromises 2597 electrodes of 2.5 microm in radius and of which 1550 of which are electrochemically active in a hexagonal arrangement separated by the nearest neighbour by 55 microm. Well defined voltammetric waves are found with peak currents proportional to the concentration of hydroxide ions in the range 50 microM to 1 mM. Detection limits of 20 microM using the 170 ultra-microelectrode and 10 microM with the 1550 ultra-microelectrode array are shown to be possible but with a higher sensitivity of 4 mA M(-1) observed using the 1550 ultra-microelectrode array compared to 1.2 mA M(-1) with the 170 ultra-microelectrode array.     

Monitoring managerial efficiency in the performing arts: A regional theatres network perspective

Managerial efficiency within the performing arts programming can be understood as the technical efficiency of transforming the resources cultural managers have available into a determined cultural output. Through this explanation different conceptions on the finished performance product it leads us to select two different output variables (number of performances, and number of attendances). In this way, three different models are considered regarding those conceptual points of view. Data on the Circuït Teatral Valencià, a Spanish regional theatres network, is used to develop empirically the concept of Managerial Efficiency and set up a framework to allow us to monitor it.     

Long-Range proton-proton coupling constants. I. Propanic coupling involving a methyl group 4JMeH

An equation is formulated on the basis of theoretical INDO/FPT calculations which describes the angular dependence of the propanic long-range coupling constant ⁴J_MeH in substituted HCCCH₃ fragments. This equation is a truncated Fourier series in the torsion angle ?, HCCMe, which takes into account the dependence of the Fourier coefficients on the bond angle θ, CCMe. The substituent effects are assumed to be additive. Some parameters in the equation may be obtained from the ⁴J_MeH couplings in propane and neopentane derivatives. The calculated effect upon ⁴J_MeH of changes in the bond angle θ is significant and it seems to be in part the cause of some effects which have been attributed to conformational dependence.     

Preparation and electrochemical behavior of ordered rh adlayers on Pt(100) electrodes

Rhodium adlayers on Pt(100) substrates have been prepared by electrodeposition from dilute Rh(III) acidic solutions. The initially disordered layer is electrochemically annealed by applying a polarization program consisting of high-sweep-rate multicycle sequences between 0.05 and 0.78 V(RHE) in 0.1 M H(2)SO(4). In this way, a pseudomorphic Rh monolayer can be prepared on Pt(100) substrates. The degree of order of the electrochemically annealed layer has been evidenced not only through voltammetric experiments but also by means of scanning tunneling microscopy with atomic resolution for iodine-protected adlayers, which show a c(2 x 2) structure. The electrochemically induced ordering of the Rh adlayer appears to be a consequence of the repeated cycles of adsorption/desorption of H and, especially, oxygenated species. Voltammetry in sulfuric acid solutions permits examination of the energetics of H/anions and OH/O adsorption as a function of the Rh coverage. The first monolayer adsorbs both hydrogen and oxygenated species more strongly than the second one. This can be explained through an electronic effect caused by the underlying Pt(100) substrate.     

Defect concentration in Ti-substituted YIG from TG curves

The article discusses theory and experiment about the measurement of defect concentration in Ti-substituted yttrium iron garnet by means of thermogravimetry techniques. The two possible cases arising from oxygen interchange with atmosphere, oxygen vacancies and interstitial cations, may be analyzed quantitatively from the derived expressions. The possibility of another type of defects being present in the samples, not associated to oxygen evolution, is not excluded. Measurements were carried out in air and CO₂ for different Ti contents. The substitution tends to increase slightly the defect parameter θ in YIG, while a CO₂ reducing atmosphere is much more effective than the Ti substitution for increasing θ. Calculations for a given single-phased sample sintered in air show two possibilities: a deficit of one oxygen atom for every 2.5 unit cells of 96 atoms, or one excess cation for every 3.5 cells. Other samples show very similar results. The accuracy involved in the measurements is about 2–3%.