Comparative reactivity of glycols in PET glycolysis

The kinetics of poly(ethylene terephthalate) (PET) glycolysis by diethylene glycol (DEG), dipropylene glycol (DPG), glycerol (Gly) and mixtures of these glycols have been studied with two experimental procedures: uncatalysed at 220 °C and catalysed at 190 °C. An experimental device was set up allowing the isothermal kinetics to be monitored. A precise initial reaction time was obtained by separately warming the glycol and the polyester at the temperature of reaction before mixing them.The reactivity order of different glycols varies according to the conditions of temperature and catalysis. Schematically, the global reactivity does depend not only on the chemical reactivity of the glycol but also on its physico-chemical properties: ability to solvate the solid polyesters and polarity of the reaction mixture. Attempts to find synergic effects failed for almost all mixtures, except the mixture DPG + Gly in which the PET is digested more quickly than in pure DPG or Gly.     

Ca(2.5)Sr(0.5)GaMn2O8: diamagnetic Ga in control of the structural and electronic properties of a bilayered manganate

The temperature dependence of the crystal structure and electronic properties of brownmillerite-like Ca(2.5)Sr(0.5)GaMn(2)O(8) has been studied by neutron powder diffraction and muSR spectroscopy. The results show that short-range 2D magnetic order begins to develop within the perovskite-like bilayers of MnO(6) octahedra approximately 50 K above the 3D Néel temperature of approximately 150 K. The bilayers show a structural response to the onset of magnetism throughout this temperature range whereas the GaO(4) layers that separate the bilayers only respond below the 3D ordering temperature. XANES spectroscopy shows that the sample contains Mn(3+) and Mn(4+) cations in a 1:1 ratio, and the behavior in the region of the Néel transition is interpreted as a local charge ordering. Electron diffraction and high-resolution electron microscopy have been used to show that the local microstructure is more complex than the average structure revealed by neutron diffraction, and that microdomains exist in which the GaO(4) tetrahedra show different orientations. It is argued that the bonding requirements of diamagnetic gallium control the electronic behavior within the perovskite-like bilayers.     

MIL-50, an open-framework GaPO with a periodic pattern of small water ponds and dry rubidium atoms: a combined XRD,NMR, and computational study

A new fluorinated gallium phosphate, MIL-50, has been synthesized under mild hydrothermal conditions using 1,6-diaminohexane. The chemical formula of MIL-50 is Rb(2)Ga(9)(PO(4))(8)(HPO(4))(OH)F(6).2N(2)C(6)H(18).7H(2)O. The structure is a network of hexameric units of Ga(3)(PO(4))(3)F(2) and Ga(3)(PO(4))(2)(HPO(4))F(3) via corner sharing. It creates a three-dimensional open-framework delimiting 6- and 18-ring channels running along the c axis. The diprotonated 1,6-diaminohexane and water molecules are trapped within the 18-ring pores, whereas the rubidium cations reside in the 6-ring ones. A double quantum (31)P NMR experiment and partial charge calculations indicate that water molecules are present under the form of periodic small clusters, lowering the multiplicity of one phosphorus site, P3. Though water hops within the clusters, the motion leaves the water pattern periodic. Rubidium is so tightly embedded into the framework that water moving in the large 18-ring channels does not reach it, leaving it therefore dry. The crystal framework may be ascribed to the orthorhombic space group Cmc2(1) (n degrees 36), a = 32.1510(2), b = 17.2290(3), c = 10.2120(1) A. The periodic water pattern has a different symmetry than that of the framework. A method has been devised to superpose the two sublattices that coexist in the same unit cell in order to have full occupancy of each site and to perform Madelung summations. This original method is of general interest for most zeolitic materials exhibiting a different symmetry for the framework and the template sublattices.     

The future of laboratory automation urgency, technology and strategy

The commercial application of laboratory robotics is entering its eight year. Developments in general purpose computer and software technology combined with developments in laboratory robotics have contributed to significant improvements in performance, reliability, and ease-of-use. The need for high quality laboratory automation continues to increase. Competitive pressure for higher quality and lower cost products and the shrinking supply of qualified technical people demands more effective use of our people resources. This presentation will develop the need for a new role and broader contribution from automation to the laboratory of the future. Specifically, I will discuss the critical decrease in the number of young people embarking on careers in chemistry and science and how automation can help make these career opportunities more challenging and exciting. The second part of the presentation will discuss the evolution of laboratory robotics technology and project some of the trends ahead.     

Substrate-reagent complexation ability in enantioselective 1,4 addition reactions

Hydrogen-aarbonyl chelation and magnesium-arene π coordination are proposed to aooount for enhanced enantioselectivïty in 1,4-addition reactions of chiral cuprates.     

Etude des métastannates de cadmium par spectrographie d'absorption infrarouge entre 5 et 40μ. Solutions solides entre l'oxyde d'étain et Poxyde de cadmium

Résumé Par chauffage à 1000° de mélanges d'oxyde stannique et d'oxyde de cadmium en proportions diverses, comme par déshydratation de précipités mixtes des hydroxydes correspondants, il se forme une série de solutions solides de l'oxyde de cadmium dans l'oxyde d'étain. Elles sont solubles dans l'acide chlorhydrique et présentent un spectre d'absorption infrarouge caractéristique que l'on a comparé avec celui des 2 métastannates de cadmium CdSnO₃, l'un de type ilménite, l'autre de type perovskite.

---

Summary By heating various mixture of stannic oxide and cadmium oxide to 1000° C, a series of solid solutions of cadmium oxide in stannic oxide results as is the case when mixed precipitates of the corresponding hydroxides are dehydrated. They are soluble in hydrochloric acid and yield a characteristic infrared absorption spectrum that was compared with that of the two cadmium métastannates CdSnO₃, one of the ilmenite type, the other of the perovskite type.

---

Zusammenfassung Erhitzt man verschieden zusammengesetzte Gemische von Zinnoxid und Cadmiumoxid auf 1000° C oder werden Mischfällungen der entsprechenden Hydroxide dehydratisiert, so entsteht eine Reihe fester Lösungen von Cadmiumoxid in Zinnoxid. Sie sind in Salzsäure löslich und zeigen ein charakteristisches Absorptionsspektrum im IR. Dieses wurde mit dem Spektrum zweier Cadmium-Metastannate (CdSnO₃) vom Typus des Ilmenits bzw. Perovskits verglichen.

     

Electromagnetic fission of238U at 600 and 1000 MeV per nucleon

Electromagnetic fission of²³⁸U projectiles at E/A =600 and 1000 MeV was studied with the ALADIN spectrometer at the heavy-ion synchrotron SIS. Seven different targets (Be, C, Al, Cu, In, Au and U) were used. By considering only those fission events where the two charges added up to 92, most of the nuclear interactions were excluded. The nuclear contributions to the measured fission cross sections were determined by extrapolating from beryllium to the heavier targets with the concept of factorization. The obtained cross sections for electromagnetic fission are well reproduced by extended Weizsäcker-Williams calculations which include E1 and E2 excitations. The asymmetry of the fission fragments' charge distribution gives evidence for the excitation of the double giant-dipole resonance in uranium.Communicated by V. Metag     

Low energy excitations in KMnO4 with 1 eV<=ΔE<=10 eV from electron-energy loss spectroscopy

Electron-energy loss spectra of potassium permanganate (KMnO₄) with primary electron energies 25 eV<=E₀<=500 eV show 7 peaks in the energy-loss range 1 eV<=ΔE<=10eV and are successfully analysed with a superposition of 7 independent Gaussians. The intensity of these lines follow roughly a power-law dependence on the primary energy I∝E ₀ ^-α . There are two groups of lines, the first with an exponent α≈0.5, while the lines in the second group decay much stronger with increasingE ₀ corresponding to a value 0.9<=α<=1.3. The 4 lines in the first group are identified as dipole allowed transitions by comparison to recent first principle molecular-orbital calculations for the (MnO₄) molecule by H. Nakai et al. The dipole-allowed excitation spectrum obtained from this analysis agrees very well with these first principle calculations.     

Metal island coated polymer sensor for direct determination of the volume effect of chaotropic agents

A new optical sensor is presented, based on the analyte reaction resulting in swelling and shrinking of a thin polymer layer. Changing the concentration of ions in a new bisazide photo-cross-linked poly(vinylpyrrolidone) polymer results in a concentration-dependent volume change of the hydrated gel. The volume response of the sensor induced by different ions is fully reversible over more than 250 cycles. The response of the device depends on the type, the charge and the concentration of the ions. The sensor material is part of an optical thin film system which transforms the variations in volume of the polymer into spectral information. The steady state of the sensor response is obtained within 60 s. The response time is mainly limited by the pump rate, the back pressure and the total volume of the system but not by the swelling of the sensor polymer. A comparative study of ion effects has demonstrated a fundamental correlation of the polymer swelling properties with the Hofmeister series of chaotropic agents. Thus it is concluded that the photopolymer, which is solubilized in aqueous solutions by the interaction of its amide structure with the solvent, behaves like the backbone amide structure of proteins.     

Ein Beitrag über Ba3Pt4HgO11: Das erste Erdkalimetall-Oxoplatinat(II,V)/Oxomercurat

A Contribution on Ba₃Pt₄HgO₁₁: The First Alkaline-Earth Oxoplatinate(II,V)/Oxomercurate Single crystals of Ba₃Pt₄HgO₁₁ were prepared by oxygen high pressure technique (4 200–3 600 bar) and investigated by X-ray methods. It crystallizes with hexagonal symmetry, space group D? P6 2c, a = 6.021, c = 17.374 Å, Z = 2. Ba₃Pt₄HgO₁₁ represents a new structure type, showing structural relationships to Ba₂Hg₃Pd₇O₁₄ and to the precious metal 6L-perovskites. The Hg²⁺ ions show dumb-bell like coordination, Pt²⁺ a square-planar surrounding and Pt⁵⁺ face shared double octahedra.