In vitro study of the interaction of cysteine with a thiazide diuretic (hydrochlorothiazide) at different ph by voltammetric and spectroscopic techniques

The interaction of cysteine (RSH) with a thiazide diuretic, hydrochlorothiazide (HCTZ) was characterized by UV-Vis absorption spectroscopy and square-wave voltammetry in Britton-Robinson (B-R) buffer solution (with pH 5, 7 and 9). On the square-wave voltamogram of cysteine, the reduction peak current of mercurous cysteine thiolate (Hg₂(RS)₂) decreased and its peak potential shifted to more positive values with the addition of HCTZ. This results showed that the RSH interacted with HCTZ. The stoichiometry of HCTZ-RSH molecular complex was determined by voltammetric data with the result of 1: 1. By using linear regression analysis of the voltammetric data at pH 5, 7 and 9, the apparent formation constants of HCTZ-RSH complex were calculated to be 9.54 × 10³, 2.80 × 10⁴ and 2.55 × 10⁴ M^?1, respectively. At the same time, this interaction was also supported by UV-Vis spectroscopic measurements. According to the voltammetric and spectroscopic results, it was suggested that the interaction mode between RSH and HCTZ molecules might be a combination of hydrophobic interactions and hydrogen bonds.     

Novel moving reaction boundary-induced stacking and separation of human hemoglobins in slab polyacrylamide gel electrophoresis

We developed a novel polyacrylamide gel electrophoresis (PAGE) method to stack and separate human hemoglobins (Hbs) based on the concept of moving reaction boundary (MRB). This differs from the classic isotachophoresis (ITP)-based stacking PAGE in the aspect of buffer composition, including the electrode buffer (pH 8.62 Tris–Gly), sample buffer (pH 6.78 Tris–Gly), and separation buffer (pH 8.52 Tris–Gly). In the MRB-PAGE system, a transient MRB was formed between alkaline electrode buffer and acidic sample buffer, being designed to move toward the anode. Hbs carried partial positive charges in the sample buffer due to its pH below pI values of Hbs, resulting in electromigrating to the cathode. Hbs would carry negative charges quickly when migrated into the alkaline electrode buffer and be transported to the anode until meeting the sample buffer again. Thus, Hbs were stacked within a MRB until the transient MRB reached the separation buffer and then separated by zone electrophoresis with molecular sieve effect of the gel. The experimental results demonstrated that there were three clear and sharp protein zones of Hbs (HbA_1c, HbA₀, and HbA₂) in MRB-PAGE, in contrast to only one protein zone (HbA₀) in ITP-PAGE for large-volume loading (≥15 μl), indicating high stacking efficiency, separation resolution, and good sensitivity of MRB-PAGE. In addition, MRB-PAGE was performed in a conventional slab PAGE device, requiring no special device. Thus, it could be widely used in separation and analysis of diluted protein in a standard laboratory.

Lipid profiling of human plasma from peritoneal dialysis patients using an improved 2D (NP/RP) LC-QToF MS method

An improved online two-dimensional liquid chromatography-quadrupole time-of-flight mass spectrometry (2D LC-QToF MS) system was developed for the lipid profiling of human plasma, in which different lipid classes were separated by the first dimensional normal-phase (NP) LC and different lipid molecular species were separated by the second dimensional reversed-phase (RP) LC. This 2D LC-QToF MS system was built based on a ten-port, two-position valve as the interface, the conditions of which had been optimized and discussed in detail. As two loops were used to trap and transfer the first dimensional elute to the second dimension separately, this new interface suppressed the sample band broadening in the first dimensional column, increased the recovery and repeatability of 2D LC interface, and offered the possibility for the realization of not-stop-flow NP/RP 2D LC system. Finally, 190 endogenous lipid species out of 10 lipid classes were determined within a single run from the plasma of peritoneal patients. This method was also applied to identify the difference in lipid profile between plasma from peritoneal dialysis patients with bad volume status and peritoneal dialysis patients with good volume status. The discovery of 30 potential biomarkers would be helpful to the malnutrition, inflammation, and atherosclerosis syndrome investigation.     

Polypeptide/Doxorubicin Hydrochloride Polymersomes Prepared Through Organic Solvent‐free Technique as a Smart Drug Delivery Platform

Rapid and efficient side‐chain functionalization of polypeptide with neighboring carboxylgroups is achieved via the combination of ring‐opening polymerization and subsequent thiol‐yne click chemistry. The spontaneous formation of polymersomes with uniform size is found to occur in aqueous medium via electrostatic interaction between the anionic polypeptide and cationic doxorubicin hydrochloride (DOX·HCl). The polymersomes are taken up by A549 cells via endocytosis, with a slightly lower cytotoxicity compared with free DOX ·HCl. Moreover, the drug‐loaded polymersomes exhibit the enhanced therapeutic efficacy, increase apoptosis in tumor tissues, and reduce systemic toxicity in nude mice bearing A549 lung cancer xenograft, in comparison with free DOX ·HCl.     

Graphene‐based solid‐phase extraction disk for fast separation and preconcentration of trace polycyclic aromatic hydrocarbons from environmental water samples

Graphene has great potentials for the use in sample preparation due to its ultra high specific surface area, superior chemical stability, and excellent thermal stability. In our work, a novel graphene‐based SPE disk was developed for separation and preconcentration of trace polycyclic aromatic hydrocarbons from environmental water samples. Based on the strong π–π stacking interaction between the analytes and graphene, the analytes extracted by graphene were eluted by cyclohexane and then determined by GC‐MS. Under the optimized conditions, high flow rate (30 mL/min) and sensitivity (0.84–13 ng/L) were achieved. The proposed method was successfully applied to the analysis of real environmental water samples with recoveries ranging from 72.8 to 106.2%. Furthermore, the property of anticlogging and reusability was also improved. This work reveals great potentials of graphene‐based SPE disk in environmental analytical.     

An interesting two‐phase solvent system and its use in preparative isolation of aconitines from aconite roots by counter‐current chromatography

Two‐phase solvent system plays crucial role in successful separation of organic compounds using counter‐current chromatography (CCC). An interesting two‐phase solvent system, composed of chloroform/ethyl acetate/methanol/water, is reported here, in which both phases contain sufficient organic solvents to balance their dissolving capacities. Adjusting the solvent system to get satisfactory partition coefficients (K values) for target compounds becomes relatively simple. This solvent system succeeded in sample preparation of aconitine (8.07 mg, 93.69%), hypaconitine (7.74 mg, 93.17%), mesaconitine (1.95 mg, 94.52%) from raw aconite roots (102.24 mg, crude extract), benzoylmesaconine (34.79 mg, 98.67%) from processed aconite roots (400.01 mg, crude extract), and yunaconitine (253.59 mg, 98.65%) from a crude extract of Aconitum forrestii (326.69 mg, crude extract).     

Optimization of mobile phase for the determination of Esomeprazole and related compounds and investigation of stress degradation by LC–MS

In this study, the objective was to investigate the degradation behavior of Esomeprazole under different recommended stress conditions according to International Conference on Harmonization of Technical Requirements for Registration of Pharmaceuticals for Human Use [1] by HPLC. Our research showed that the effect of mobile phase species on separation was significant for the determination of Esomeprazole and its related compounds. Successful separation of the drug from its related impurities and degradation products formed under different stress conditions was achieved using ammonium acetate buffer/ACN by a gradient elution. Compared with phosphate buffer/ACN, ammonium acetate buffer/ACN under same pH and gradient showed a great improvement in resolution due to the change of elution order. The drug was subjected to stress conditions including acidic, alkaline, oxidative, photolytic, and thermal conditions. Extensive degradation occurred in acidic and oxidative conditions, while mild degradation was observed in alkaline and photolytic conditions. Besides, it turned out the drug was extremely stable under thermal condition. The stability‐indicating LC–UV method was validated with respect to linearity, precision, accuracy, specificity, and robustness. The LC–MS method was also adopted for the characterization of degradation products. Based on the m/z values and fragmentation patterns, the degradation pathway of the drug has been proposed.     

In-situ interaction of nano-PbS with gelatin

Water-soluble gelatin–PbS bionanocomposites(BNCs)were synthesized via a facile one-pot chemical reaction method at pH7.40.The samples were characterized by transmission electron microscopy(TEM),X-ray diffraction(XRD),UV-vis absorption spectra(UV-vis),Fourier transform infrared spectra(FT-IR)and circular dichroism(CD).FT-IR data were used to envisage the binding of PbS particles with oxygen atoms of carbonyl groups of gelatin molecule.The possible integration mechanism between gelatin and PbS was discussed in detail.The effect of Pb2+and PbS on the conformations of gelatin has also been analyzed by means of UV-vis,CD and FT-IR spectra,resulting in less-helix content and more open structures(-sheet,β-turn,or expanded).A new formula to calculate the association constant was proposed according to the relationship between the absorbance of gelatin–PbS BNCs and the free concentration of PbS,and apparent association constants K(298/303/308 K:3.11/2.00/1.60×106mol/L)at three different temperatures were calculated based on this formula.Thermodynamic parameters such asΔGθ,ΔHθ andΔSθ were also determined.The results of the thermodynamic investigations indicated that the reaction was spontaneous(ΔGθ<0),and enthalpy-driven(ΔHθ<0).     

Determination of trace Pb(Ⅱ), Cd(Ⅱ) and Zn(Ⅱ) using differential pulse stripping voltammetry without Hg modification

In this work,we reported a simultaneous determination approach for Pb(II),Cd(II)and Zn(II)atμg L 1concentration levels using differential pulse stripping voltammetry on a bismuth film electrode(BiFE).The BiFE could be prepared in situ when the sample solution contained a suitable amount of Bi(NO)3,and its analytical performance was evaluated for the simultaneous determination of Pb(II),Cd(II)and Zn(II)in solutions.The determination limits were found to be 0.19μg L 1for Zn(II),and0.28μg L 1for Pb(II)and Cd(II),with a preconcentration time of 300 s.The BiFE approach was successfully applied to determine Pb(II),Cd(II)and Zn(II)in tea leaf and infusion samples,and the results were in agreement with those obtained using an atomic absorption spectrometry approach.Without Hg usage,the in situ preparation for BiFE supplied a green and acceptability sensitive method for the determination of the heavy metal ions.     

Design, synthesis and in vitro antitumor evaluation of novel diaryl urea derivatives bearing sulfonamide moiety

A novel series of diaryl urea derivatives bearing sulfonamide moiety have been designed and synthesized.Their in vitro antitumor effect against human cancer cell lines MX-1,A375,HepG2,Ketr3 and HT-29 was screened and evaluated by the standard MTT assay with sorafenib as the positive control.Some of the compounds showed significant inhibitory activity against multiple cell lines compared to sorafenib.In particular,2,6-dimethyl-4-{6-[3-(4-chloro-3-(trifluoromethyl)phenyl)urea]naphthalen-2-yl}sulfonyl morpholine(10d)was found to be the most potent against A375,HepG2 and Ketr3 with IC50values of 0.65–0.97mol/L,which were 5–20-fold more potent than sorafenib.Compound 10d emerged as a valuable lead for further optimization.