Two-step upflow anaerobic sludge bed system for sewage treatment under subtropical conditions with posttreatment in waste stabilization ponds

A pilot-scale sewage treatment system consisting of two upflow anaerobic sludge bed (UASB) reactors followed by five waste stabilization ponds (WSPs) in series was studied under subtropical conditions. The first UASB reactor started up in only 1 mo (stable operation, high chemical oxygen demand [COD] removal efficiency, low volatile fatty acids concentration in the effluent, alkalinity ratio above 0.7, biogas production above 0.1 Nm3/kg of CODremoved). Removal efficiencies up to 90% were obtained in the anaerobic steps at a hydraulic retention time of 6 + 4 h (80% removal in the first step). Fecal coliform removal in the whole system was 99.9999% (99.94% in anaerobic steps and 99.98% in WSPs). COD balances over UASB reactors are provided. A minimum set of data necessary to build COD balances is proposed. Intermittent sludge washout was detected in the reactors with the COD balances. Sludge washout from single-step UASB reactors should be monitored and minimized in order to ensure constant compliance with discharge standards, especially when no posttreatment is provided. The system combined high COD and fecal coliform removal efficiency with an extremely low effluent concentration, complying with discharge standards, and making it an attractive option for sewage treatment in subtropical regions.     

Wavelength dependence of the hyper Rayleigh scattering response from gold nanoparticles

The wavelength dependence of the quadratic hyperpolarizability of 11 nm diam gold nanoparticles, is reported as measured by hyper Rayleigh scattering. An important photoluminescence background underlying the hyper Rayleigh signal is observed, a contribution attributed to radiative electron-hole recombinations following multiphoton excitation favored by adsorbed organic compound like citrate on the surface of the nanoparticles. The absolute value of the quadratic hyperpolarizability of gold spherical nanoparticles is determined and a strong enhancement is observed for harmonic frequencies in resonance with the dipolar surface plasmon excitation. No contribution of the interband transition is observed. The absolute values reported, beta(C)=5.1x10(-26) esu at the second harmonic energy 2.39 eV, have been measured with femtosecond long laser pulse, and are 1 order of magnitude weaker that the one previously reported with nanosecond long pulses. This difference can be related to similar measurements performed on the second order hyperpolarizability of gold nanoparticles and may be attributed to different electronic relaxation regimes. Finally, the spectrum of the quadratic hyperpolarizability is compared to the theoretically expected one.     

Study of ab initio molecular data for inelastic and reactive collisions involving the H3+ quasimolecule

The lowest two ab initio potential energy surfaces (PES), and the corresponding nonadiabatic couplings between them, have been obtained for the H3+ system; the molecular data are compared to those calculated with the diatomic in molecules (DIM) method. The form of the couplings is discussed in terms of the topology of the molecular structure of the triatomic. The method of Baer is employed to generate "diabatic" states and the residual nonadiabatic couplings are calculated. The ab initio results for these are markedly different from the corresponding DIM data, and show the need to consider the third PES.     

Simultaneous light emission from a mixture of dendrimer encapsulated chromophores: a model for single-layer multichromophoric organic light-emitting diodes

The site isolation of two dyes capable of electronic interaction via Forster energy transfer has been studied with the two dyes coumarin 343 and pentathiophene encapsulated by dendrons containing both solubilizing and electroactive moieties. Photoluminescence studies of mixtures of the dendritic dyes show that at high dendron generation, significant site isolation is achieved with relative emission characteristics influenced by both the degree of site isolation and the emission quantum yield of the dyes. Electroluminescence studies carried out in organic light emitting diode devices confirm that color tuning may be achieved by mixing the two encapsulated dyes in a single layer. However, selective carrier trapping by one of the core component dyes can dramatically influence the effectiveness of other components in the device.     

Conformation of glycomimetics in the free and protein-bound state: structural and binding features of the C-glycosyl analogue of the core trisaccharide alpha-D-Man-(1 --> 3)-[alpha-D-Man-(1 --> 6)]-D-Man

The conformational properties of the C-glycosyl analogue of the core trisaccharide alpha-D-Man-(1 --> 3)-[alpha-D-Man-(1 --> 6)]-D-Man in solution have been carefully analyzed by a combination of NMR spectroscopy and time-averaged restrained molecular dynamics. It has been found that both the alpha-1,3- and the alpha-1,6-glycosidic linkages show a major conformational averaging. Unusual Phi ca. 60 degrees orientations for both Phi torsion angles are found. Moreover, a major conformational distinction between the natural compound and the glycomimetic affects to the behavior of the omega(16) torsion angle around the alpha-1 --> 6-linkage. Despite this increased flexibility, the C-glycosyl analogue is recognized by three mannose binding lectins, as shown by NMR (line broadening, TR-NOE, and STD) and surface plasmon resonance (SPR) methods. Moreover, a process of conformational selection takes place, so that these lectins probably bind the glycomimetic similarly to the way they recognize the natural analogue. Depending upon the architecture and extension of the binding site of the lectin, loss or gain of binding affinity with respect to the natural analogue is found.     

Spreading of viscous droplets on a non viscous liquid

Some polymer melts (of high viscosity ) can wet completely the surface of a non miscible, simple liquid. We discuss here the laws of spreading for a macroscopic droplet of this type, when the internal friction of the droplet dominates. We predict a droplet radius increasing liket ^1/4 wheret is the spreading time, or equivalently a droplet curvature decreasing liket ^–1. The droplet should be surrounded by a precursor film, which is not discussed in the present note.     

An enzyme-immunoassay for the detection of the mycotoxin zearalenone by use of yolk antibodies

The development of an enzyme-immunoassay (ELISA) for the detection of the Fusarium mycotoxin zearalenone (ZON) is described. In contrast to the common antibody isolation from mammal serum, chicken were immunized in order to isolate specific antibodies from the egg yolk. Five weeks after the start of the immunization a titer of 1:76 000 resulted from three injections without any adverse effects for the animals. Utilizing the indirect competitive assay format ZON could be detected in a concentration range between 10 and 200 μg/L. Received: 3 January 1998 / Revised: 16 March 1998 / Accepted: 20 March 1998     

Nonlinear schrödinger equations and intermolecular interactions

Nonlinear time-independent Schr6dinger equations arise if the model Hamiltonian depends on the wave function. This may occur if certain interactions are accounted for in an averaged manner, for example, if a moleule is embedded into a polarizable medium. Arguments are given in favor of the perturbational solution which facilitate the treatment of nonlinearity effects. Two examples are discussed: the case of a polarizable environment and the effective correction of the basis set superposition error.     

Electroreductive polymerization of phenylmethyldichlorosilane in a divided cell using a neutral membrane

Electrochemical formation of poly(phenylmethylsilane) in a divided cell containing a Teflon® neutral membrane was studied. The electrolysis of dichlorosilanes was carried out in a solution containing tetrahydrofuran + hexamethylphosphoramide as the solvent, tetrabutylammonium perchlorate as the support electrolyte and stainless steel as the cathode, with Pt and graphite as the resistant anodes or stainless steel as the sacrificial anode. Polysilanes with a number-average molecular weight in the range from 2,600 to 130,000 g/mol were obtained, depending on the conditions used.     

Exploring the free-energy landscape of a short peptide using an average force

The reversible folding of deca-alanine is chosen as a test case for characterizing a method that uses an adaptive biasing force (ABF) to escape from the minima and overcome the barriers of the free-energy landscape. This approach relies on the continuous estimation of a biasing force that yields a Hamiltonian in which no average force is exerted along the ordering parameter xi. Optimizing the parameters that control how the ABF is applied, the method is shown to be extremely effective when a nonequivocal ordering parameter can be defined to explore the folding pathway of the peptide. Starting from a beta-turn motif and restraining xi to a region of the conformational space that extends from the alpha-helical state to an ensemble of extended structures, the ABF scheme is successful in folding the peptide chain into a compact alpha helix. Sampling of this conformation is, however, marginal when the range of xi values embraces arrangements of greater compactness, hence demonstrating the inherent limitations of free-energy methods when ambiguous ordering parameters are utilized.