Amperometric monitoring of lactate accumulation in rabbit ischemic myocardium

Fabrication and characterization of miniature, flexible, planar biosensors for monitoring l-lactate accumulation in an ischemic myocardium are described. Three configurations of Au-based electrodes were fabricated by a photolithographic technique on flexible polyimide Kapton((R)) foil. All sensors are based on an immobilized lactate oxidase with amperometric detection of the enzymatically produced hydrogen peroxide at a platinum-electroplated-gold base electrode polarized at 0.5 V versus Ag/AgCl. An inner electropolymeric layer is used to prevent electrode fouling and to reject the interference effects of easily oxidizable molecules. In addition, a diffusion controlling outer layer that greatly enhances the linear dynamic range of the sensor, is obtained by casting a polyurethane external film. The developed sensor was evaluated in vitro and proved to have high selectivity, good operational stability, good accuracy and precision (average recovery = 102.3 +/- 0.4% for control sera), fast response time (t(95) = 20 s) and high upper limit of the linear dynamic range (25-80 mM, with sensitivity of 1.7-0.4 nA mM(-1) respectively at PO(2) = 15 mmHg). Subsequently, the sensor was brought into direct contact with the surface of the rabbit papillary muscle and used for continuous quantitative monitoring of extracellular lactate accumulation during no-flow ischemia.     

Kinetic Spectrophotometric Determination of Ritodrine Hydrochloride in Dosage Forms

A simple and sensitive kinetic method was developed for the determination of ritodrine hydrochloride in pharmaceutical preparations. The method is based upon a kinetic investigation of the oxidation reaction of the drug with alkaline potassium permenganate at room temperature for a fixed 12.5 min; the absorbance of the colored permenganate ion was measured at 609 nm. The absorbance concentration plots were rectilinear over the range of 1.6–11.2 μg mL^?1 (r = 0.9992) with a minimum detectability of 0.096 μgmL^?1 (2.88 × 10^?7 M). The different experimental parameters affecting the development and stability of color were carefully studied and optimized. The determination of ritodrine hydrochloride by the fixed concentration and rate constant methods is also feasible with the calibration equations obtained, but the fixed time method has been found to be more applicable. The proposed method was applied successfully to the determination of ritodrine hydrochloride in tablets and ampoules with average recoveries of 100.37 ± 0.93% and 100.42 ± 0.87%, respectively. The results obtained were in good agreement with those obtained using a reference method for comparison. A proposal of the reaction pathway is also presented.     

Selective kinetic determination of pyridoxal-5'-phosphate with an ammonia gas-sensing electrode

The coenzyme pyridoxal-5'-phosphate (PLP) is deiermined by in situ measurement of the rate of ammonia production using a potentiometric gas-sensing membrane electrode. It is shown that the initial rate of ammonia liberation from L-tryptophan by action of tryptophanase apoenzyme and the coenzyme can be linearly related to PLP levels in the nanogram range with minimal interference from related compounds. Calibration data for the 1 × 10^-7–2.5 × 10^-6 M range for PLP yielded a least-squares equation of rate (mV min^-1) = (0.64 ± 0.01) C — 0.01 ± 0.02 with a standard error of 0.02 mV min^-1, where concentration, C, is expressed in units of 10^-7 mol l^-1.     

2-Amino-1-cyan-glutaconsäureamid-1-methylester,ein Dimeres des Cyanessigesters und Cyanacetamid

Synthesis of methyl 3-amino-4-carbomyl-2-cyano-2-butenoate is described and2 a classified as a dimer of methyl cyanoacetate and cyanoacetamide. By ammonolysis of the dimer of methyl cyanoacetate with dimethylamine and anilines, resp. the dimethylamide and anilides, resp. (2 b and3 a–j) are obtained. Condensation with salicylaldehyde to the pyrone derivative4 proves the structure of2 a, ring closure reactions in basic or acidic medium yield the pyridones6 a and7 a,b, coupling with diazonium salts the pyridazines8 a–d. The amides2 and the anilides3 show hindered rotation of the enamino- and the amide-group by hydrogen bonds between the nitrogen functions and the ester carbonyl (Z-form). The G values are reported.

     

The unexpected rearrangement of 1,5‐benzodiazepin‐2,4‐dione to a benzimidazol‐2‐one derivative during N,N'‐diglucosylation

Reaction of 1,5‐benzodiazepin‐2,4‐dione with 3‐O‐substituted‐5,6‐anhydro‐1,2‐isopropylidene‐α‐D‐glucofuranose gave the unexpected N,N'‐di‐glucofuranosyl benzimidazol‐2‐one by a novel rearrangement and ring closure reaction. A mechanism is proposed.     

THE REACTIVITY OF CITRONELLOL and α-THUJENE WITH SINGLET OXYGEN. RATE CONSTANTS OF CHEMICAL REACTION and PHYSICAL QUENCHING*

The quantum yields of Rose Bengal sensitized photooxidation of citronellol and α-thujene have been determined as a function of added acceptor and compared with those of furfuryl alcohol as a standard. The results permitted the calculation of the corresponding rate constants of chemical reaction (k_T) and physical quenching (K_q) of singlet oxygen. The sum (k_T+ k_q) has been verified independently by a Stern-Volmer analysis of the singlet oxygen luminescence quenching. α-Thujene reacts faster with singlet oxygen than citronellol, physical quenching being negligible in both cases.     

Challenges in validating the sterilisation dose for processed human amniotic membranes

Most of the tissue banks in the Asia Pacific region have been using ionising radiation at 25 kGy to sterilise human tissues for save clinical usage. Under tissue banking quality system, any dose employed for sterilisation has to be validated and the validation exercise has to be a part of quality document. Tissue grafts, unlike medical items, are not produced in large number per each processing batch and tissues relatively have a different microbial population. A Code of Practice established by the International Atomic Energy Agency (IAEA) in 2004 offers several validation methods using smaller number of samples compared to ISO 11137 (1995), which is meant for medical products. The methods emphasise on bioburden determination, followed by sterility test on samples after they were exposed to verification dose for attaining of sterility assurance level (SAL) of 10⁻¹. This paper describes our experience in using the IAEA Code of Practice in conducting the validation exercise for substantiating 25 kGy as sterilisation dose for both air-dried amnion and those preserved in 99% glycerol.     

Novel Cyanine Dyes: Synthesis,Characterization and Photosensitization‐Structure Correlation

Novel furo, thieno and pyrrolo[2,3‐b]pyrazole cyanine dyes were synthesized. The structure‐photosensitization properties correlation of the dyes were examined in 95% ethanol solution by absorption spectroscopy. The chemical structure of the starting biheterocyclic compounds and their derived cyanine dyes were confirmed by elemental analysis, IR and ¹H NMR spectroscopy.     

Substitution of phosphine in the complex [RhCl(cyclooctadiene)(phosphine)] by 1-hexene

Summary The substitution of phosphine in the [RhCl(COD)(phosphine)] complex (1), where phosphine is PPh₃ or 1/2 BPS-2 [bis(diphenylphosphinoethyl)tetramethyldisiloxane] and COD is cycloocta-1,5-diene, by 1-hexene is a two-step reversible reaction. All individual rate constants and equilibrium constants were determined spectrophotometrically and associative mechanism occurring via the formation of five-coordinated [RhCl(COD)(phosphine)(1-hexene)] (2) was inferred. The rate-determining step changes from the first- to the second-one as the concentration of 1-hexene increases. An excess of phosphine shifts the equilibrium towards complex (2).     

Ni+Pd+Ga and Ni+Pd+in liquid alloys: Enthalpies of formation

In order to fill the evident gap in the thermodynamic data of nickel-palladium-gallium and nickel-palladium-indium ternary alloys, the enthalpies of formation of these systems in the liquid state have been determined. This was achieved by means of a very high temperature calorimeter (T<1800 K), using the direct drop method, and based on analogous measurements of the respective binary alloys previously published. Complete automation of the calorimeter led to a good precision even at the highest temperatures. The enthalpies of formation of the ternary liquid alloys were measured between 1400 and 1600 K on the whole composition range. As in the limiting binary systems, enthalpies of formation are negative and non temperature dependent at any composition.

---

Zusammenfassung Um die Lücke hinsichtlich thermodynamischer Daten von Nickel-Palladium-Gallium und Nickel-Palladium-Indium Legierungen zu füllen, wurden die Bildungsenthalpien dieser ternÄren Systeme im flüssigen Zustand bestimmt. Dies erfolgte mittels eines Kalorimeters für sehr hohe Temperaturen (T<1800 K), unter Verwendung der direkten Einwurfmethode auf der Basis früher veröffentlichter Messungen an den entsprechenden binÄren Systemen. Die Bildungsenthalpien der flüssigen ternÄren Legierungen wurden zwischen 1400 und 1600 K über den gesamten Zusammensetzungsbereich bestimmt. VollstÄndige Automation des Kalorimeters bewirkte hohe PrÄzision selbst bei den höchsten Temperaturen. Wie in den begrenzenden binÄren Systemen sind die Bildungsenthalpien negativ und bei allen Zusammensetzungen nicht temperaturabhÄngig.