In situ ion beam sputter deposition and X‐ray photoelectron spectroscopy (XPS) of multiple thin layers under computer control for combinatorial materials synthesis

Deposition of ultra‐thin layers under computer control is a frequent requirement in studies of novel sensors, materials screening, heterogeneous catalysis, the probing of band offsets near semiconductor junctions and many other applications. Often large‐area samples are produced by magnetron sputtering from multiple targets or by atomic layer deposition (ALD). Samples can then be transferred to an analytical chamber for checking by X‐ray photoelectron spectroscopy (XPS) or other surface‐sensitive spectroscopies. The ‘wafer‐scale’ nature of these tools is often greater than is required in combinatorial studies, where a few square centimetres or even millimetres of sample is sufficient for each composition to be tested. The large size leads to increased capital cost, problems of registration as samples are transferred between deposition and analysis, and often makes the use of precious metals as sputter targets prohibitively expensive. Instead we have modified a commercial sample block designed to perform angle‐resolved XPS in a commercial XPS instrument. This now allows ion‐beam sputter deposition from up to six different targets under complete computer control. Ion beam deposition is an attractive technology for depositing ultra‐thin layers of great purity under ultra‐high vacuum conditions, but is generally a very expensive technology. Our new sample block allows ion beam sputtering using the ion gun normally used for sputter depth‐profiling of samples, greatly reducing the cost and allowing deposition to be done (and checked by XPS) in situ in a single instrument. Precious metals are deposited cheaply and efficiently by ion‐beam sputtering from thin metal foils. Samples can then be removed, studied and exposed to reactants or surface treatments before being returned to the XPS to examine and quantify the effects. Copyright © 2016 The Authors Surface and Interface Analysis Published by John Wiley & Sons Ltd.     

Toward high-performance computational chemistry: I. Scalable Fock matrix construction algorithms

Several parallel algorithms for Fock matrix construction are described. The algorithms calculate only the unique integrals, distribute the Fock and density matrices over the processors of a massively parallel computer, use blocking techniques to construct the distributed data structures, and use clustering techniques on each processor to maximize data reuse. Algorithms based on both square and row-blocked distributions of the Fock and density matrices are described and evaluated. Variants of the algorithms are discussed that use either triple-sort or canonical ordering of integrals, and dynamic or static task clustering schemes. The algorithms are shown to adapt to screening, with communication volume scaling down with computation costs. Modeling techniques are used to characterize algorithm performance. Given the characteristics of existing massively parallel computers, all the algorithms are shown to be highly efficient for problems of moderate size. The algorithms using the row-blocked data distribution are the most efficient. © 1996 by John Wiley & Sons, Inc.     

Porphyrin bleaching and PDT-induced spectral changes are irradiance dependent in ALA-sensitized normal rat skin in vivo

Photobleaching kinetics of aminolevulinic acid-induced protoporphyrin IX (PpIX) were measured in the normal skin of rats in vivo using a technique in which fluorescence spectra were corrected for the effects of tissue optical properties in the emission spectral window through division by reflectance spectra acquired in the same geometry and wavelength interval and for changes in excitation wavelength optical properties using diffuse reflectance measured at the excitation wavelength. Loss of PpIX fluorescence was monitored during photodynamic therapy (PDT) performed using 514 nm irradiation. Bleaching in response to irradiances of 1, 5 and 100 mW cm-2 was evaluated. The results demonstrate an irradiance dependence to the rate of photobleaching vs irradiation fluence, with the lowest irradiance leading to the most efficient loss of fluorescence. The kinetics for the accumulation of the primary fluorescent photoproduct of PpIX also exhibit an irradiance dependence, with greater peak accumulation at higher irradiance. These findings are consistent with a predominantly oxygen-dependent photobleaching reaction mechanism in vivo, and they provide spectroscopic evidence that PDT delivered at low irradiance deposits greater photodynamic dose for a given irradiation fluence. We also observed an irradiance dependence to the appearance of a fluorescence emission peak near 620 nm, consistent with accumulation of uroporphyrin/coproporphyrin in response to mitochondrial damage.     

Chemical investigation of three plutonium–beryllium neutron sources

Thorough physical and chemical characterization of plutonium–beryllium (PuBe) neutron sources is an important capability with applications ranging from material accountancy to nuclear forensics. Characterization of PuBe sources is not trivial owing to range of existing source designs and the need for adequate infrastructure to deal with radiation and protect the analyst. This study demonstrates a method for characterization of three PuBe sources that includes physical inspection and imaging followed by controlled disassembly and destructive analysis.     

Reactions of metal carbonyl cluster complexes with multidentate phosphine ligands; reactions with bis(diphenylphosphino)methane

Reactions of Rh₆(CO)₁₆ with bis(diphenylphosphino)methane (dppm) gave Rh₆(CO)₁₄(dppm), Rh₆(CO)₁₂(dppm)₂, or Rh₆(CO)₁₀(dppm)₃, depending upon the reaction conditions. Rh₄(CO)₁₀(dppm) may be obtained from the reaction of Rh₄(CO)₁₂ with dppm, but this derivative rapidly decomposes in solution to give Rh₄(CO)₈(dppm)₂, Rh₆(CO)₁₄(dppm), and Rh₆(CO)₁₂(dppm)₂. Ir₄(CO)₁₀(dppm) and Ir₄(CO)₈(dppm)₂ have also been prepared, and their structures are discussed on the basis of infrared and ³¹P NMR spectroscopic data.     

The 2-Pebbling Property and a Conjecture of Graham's

The pebbling number of a graph G, f(G), is the least m such that, however m pebbles are placed on the vertices of G, we can move a pebble to any vertex by a sequence of moves, each move taking two pebbles off one vertex and placing one on an adjacent vertex. It is conjectured that for all graphs G and H, f(G 2H)hf(G)f(H).¶Let C_m and C_n be cycles. We prove that f(C_m 2C_n)hf(C_m) f(C_n) for all but a finite number of possible cases. We also prove that f(G2T)hf(G) f(T) when G has the 2-pebbling property and T is any tree.     

Surface analysis of thick gold films by X-ray fluorescence using the base metal as an internal reference

A procedure has been developed for the determination of the amount of gold clad on a brass base. The method does not require dissolution of the sample and utilizes the presence of copper in the base metal as an internal standard.     

The effect of rapid rotation on a vertical bridgman furnace at large Rayleigh number

In quasi-steady operation, convection currents in a Bridgmandevice, used for producing a semi-conductor crystal, createinhomogeneities that may make the crystal unusable. It has oftenbeen suggested that additional forces due to rotation or magnetismmight be efficacious in reducing the segregation of the elementsof the alloy. It has been found that, over a wide range of rotationrates, there is no improvement in performance due to rotationabout the vertical axis. However, numerical results that havebeen obtained previously (Lee & Pearlstein, J. Crys. Growth240, 2002) indicate that, when effects of centrifugal buoyancyare introduced, a substantial reduction in segregation is achieved.In the work reported here, by contrast, in which we extend previouslarge-Rayleigh-number asymptotic analysis to include centrifugalbuoyancy, we find no improvement in radial segregation, butrather increasing segregation with increasing rotation rate.     

Diameter graphs of polygons and the proof of a conjecture of Graham

We show that for an n-gon with unit diameter to have maximum area, its diameter graph must contain a cycle, and we derive an isodiametric theorem for such n-gons in terms of the length of the cycle. We then apply this theorem to prove Graham's 1975 conjecture that the diameter graph of a maximal 2m-gon (m?3) must be a cycle of length 2m−1 with one additional edge attached to it.