Complete ozonolysis of alkyl substituted ethenes at -60 degrees C: distributions of ozonide and oligomeric products

The distribution of ozonide and oligomeric structures formed on complete ozonolysis of alkenes in a non-participating solvent at -60 degrees C is governed by the alkyl substitution around the carbon-carbon double bond. The ozonolysis of a 1,1-alkyl substituted ethene generally favours the formation of an ozonide (a 1,2,4-trioxolane). Whereas the ozonolysis of a 1,1,2-alkyl substituted ethene also produces ozonide, a considerable amount of the ozonised products are oligomeric in nature. For example, the ozonolysis of 3-methylpent-2-ene in solution to high conversion in pentane yields oligomers with structural units derived from the fragmentation products of the primary ozonide (a 1,2,3-trioxolane) which are namely butanone carbonyl oxide and acetaldehyde; these can be characterised by electrospray ionisation mass spectroscopy (ESI-MS) under soft ionisation conditions. The predominant oligomers formed are rich in carbonyl oxide units (80 + mol%) and are cyclic in nature. A small proportion of the oligomers formed are open chain compounds with end groups that suggest that chain termination is brought about either by water or by hydrogen peroxide. Residual water in the solvent will react with the carbonyl oxides to produce 2-methoxybut-2-yl hydroperoxide, which we propose readily decomposes generating hydrogen peroxide. A significant yield of oligomers also is obtained from the ozonolysis of a 1,2-alkyl substituted ethene. The ozonolysis of trans-hex-2-ene in pentane yields oligomers containing up to four structural units and are predicted to be mainly cyclic.     

Isotope effects in electron-donor-acceptor complexes involving aromatic hydrocarbons and fluoranil from NMR shift measurements

Equilibrium constants and NMR shift parameters have been determined for complexes of benzene, toluene and p-xylene and their perdeutero-analogues with fluoranil in cyclohexane solution from NMR shift measurements. Isotope effects are observed in the 1:1 equilibrium constants for the complexes of p-xylene $\text{(}\text{K}{}_1\text{(D)}\text{K}{}_1\text{(H)}$= 1.1₀) and toluene $\text{(}\text{K}{}_1\text{(D)}\text{K}{}_1\text{(H)}$ = 1.0₉). A much smaller effect was observed for the benzene complex which could not be quantified. These results may be interpreted through either the larger electronegativity of H over D, or the greater steric requirements of H over D.     

Solution-phase parallel synthesis of a pharmacophore library of HUN-7293 analogues: a general chemical mutagenesis approach to defining structure-function properties of naturally occurring cyclic (depsi)peptides

HUN-7293 (1), a naturally occurring cyclic heptadepsipeptide, is a potent inhibitor of cell adhesion molecule expression (VCAM-1, ICAM-1, E-selectin), the overexpression of which is characteristic of chronic inflammatory diseases. Representative of a general approach to defining structure-function relationships of such cyclic (depsi)peptides, the parallel synthesis and evaluation of a complete library of key HUN-7293 analogues are detailed enlisting solution-phase techniques and simple acid-base liquid-liquid extractions for isolation and purification of intermediates and final products. Significant to the design of the studies and unique to solution-phase techniques, the library was assembled superimposing a divergent synthetic strategy onto a convergent total synthesis. An alanine scan and N-methyl deletion of each residue of the cyclic heptadepsipeptide identified key sites responsible for or contributing to the biological properties. The simultaneous preparation of a complete set of individual residue analogues further simplifying the structure allowed an assessment of each structural feature of 1, providing a detailed account of the structure-function relationships in a single study. Within this pharmacophore library prepared by systematic chemical mutagenesis of the natural product structure, simplified analogues possessing comparable potency and, in some instances, improved selectivity were identified. One potent member of this library proved to be an additional natural product in its own right, which we have come to refer to as HUN-7293B (8), being isolated from the microbial strain F/94-499709.     

Porphyrin bleaching and PDT-induced spectral changes are irradiance dependent in ALA-sensitized normal rat skin in vivo

Photobleaching kinetics of aminolevulinic acid-induced protoporphyrin IX (PpIX) were measured in the normal skin of rats in vivo using a technique in which fluorescence spectra were corrected for the effects of tissue optical properties in the emission spectral window through division by reflectance spectra acquired in the same geometry and wavelength interval and for changes in excitation wavelength optical properties using diffuse reflectance measured at the excitation wavelength. Loss of PpIX fluorescence was monitored during photodynamic therapy (PDT) performed using 514 nm irradiation. Bleaching in response to irradiances of 1, 5 and 100 mW cm-2 was evaluated. The results demonstrate an irradiance dependence to the rate of photobleaching vs irradiation fluence, with the lowest irradiance leading to the most efficient loss of fluorescence. The kinetics for the accumulation of the primary fluorescent photoproduct of PpIX also exhibit an irradiance dependence, with greater peak accumulation at higher irradiance. These findings are consistent with a predominantly oxygen-dependent photobleaching reaction mechanism in vivo, and they provide spectroscopic evidence that PDT delivered at low irradiance deposits greater photodynamic dose for a given irradiation fluence. We also observed an irradiance dependence to the appearance of a fluorescence emission peak near 620 nm, consistent with accumulation of uroporphyrin/coproporphyrin in response to mitochondrial damage.     

Ozonolysis of tetramethylethylene: characterization of cyclic and open-chain oligoperoxidic products

The ozonolysis of tetramethylethylene (TME) in solution to high conversion in nonparticipating solvents at -60 degrees C yields predominantly oligoperoxides. For the first time, these products have been characterized using electrospray ionization mass spectrometry (ESI-MS) under soft ionization conditions. The predominant structure formed in reactions carried out in pentane (up to 2.0 M TME) is shown to be the cyclic hexamer of acetone carbonyl oxide (oligocarbonyl oxide with degree of polymerization, n = 6), but cyclic structures with n up to 19 are observed. A small proportion of the oligoperoxides formed are open-chain compounds with end groups that suggest that chain termination of oligocarbonyl oxides can occur through reaction with either water or hydrogen peroxide. Ozonolysis in dried butyl acetate similarly produces mainly cyclic oligoperoxides. However, ozonolyses carried out in undried butyl acetate yield mainly open-chain oligoperoxides, confirming that propagating carbonyl oxide chains are readily terminated by water. Relative amounts of the open-chain oligomers so-formed suggest that undried butyl acetate contains ca. 0.1% w/w water. The ozonolysis of TME in the participating solvent, methanol, at -60 degrees C yields 2-methoxyprop-2-yl hydroperoxide via reaction of acetone carbonyl oxide with methanol; no oligoperoxidic products are formed in this case.     

Dynamic mechanical analysis (DMA), 13c solid state nmr and micro-thermomechanical studies of historical parchment

DMA and solid state ¹³C NMR techniques were used to measure historical parchment samples within the framework of the project (MAP) Micro Analysis of Parchment (EC contract No. SMT4-96-2101) in collaboration with the School of Conservation in Copenhagen. DMA was used in both thermal scan and creep modes. Thermal scans provided information on the transitions associated with the collagen polymer. Microthermal analysis was also used to obtain information on the topography and thermal conductivity of sample areas of 100 μm. Localised heating enabled measurements of softening transitions in the sample. This behaviour is influenced by the chemical composition of parchment. 13C NMR provided information on the carbon atoms associated with the polypeptide chains of the collagen in parchment. The behaviour of samples immersed in water and measured in DMA creep mode was used to measure the shrinkage behaviour of the parchment samples. The different but complementary techniques provided a means for characterising the physicochemical state of parchment samples. This revised version was published online in July 2006 with corrections to the Cover Date.     

A New Chemo‐Enzymatic Route to Side‐Chain Liquid‐Crystalline Polymers: The Synthesis and Polymerization of 6‐(4‐Methoxybiphenyl‐4′‐oxy)hexyl Vinyl Hexanedioate

A novel synthetic method combining chemo and enzymatic synthesis strategies was employed to prepare a vinyl acetate type monomer, 6‐(4‐methoxybiphenyl‐4′‐oxy)hexyl vinyl hexanedioate (VA‐LC). Homo‐ and copolymers of VA‐LC with maleic anhydride (MAn) were prepared by conventional free radical polymerization using 2,2′‐azobisisobutyronitrile (AIBN) and 1,1′‐azobis (cyclohexane carbonitrile) (AHCN) as an initiator at 95 and 60 °C, respectively. The thermal properties of the generated polymeric material were investigated by differential scanning calorimetry (DSC), and the optical texture was inspected by polarizing optical microscopy (POM). While the monomer VA‐LC does not exhibit liquid‐crystalline properties, poly(VA‐LC), and the alternating copolymer of VA‐LC with maleic anhydride both displayed such properties.

     

Comparison of dynamic mechanical and dielectric thermal analysis on cure studies for composites

Dielectric measurements covering a wide frequency range provide one of the few practical methods for monitoring the cure of thermosets (epoxy, etc.) using relatively non-intrusive sensors. The measurements form the basis of a manufacturing control cycle, in the autoclave, provided the rheological state of the thermoset can be related to the dielectric constant (¹) and loss factor (tan). The present paper concerns further investigations in our laboratory of the correlation between mechanical and dielectric behaviour during cure (1).

---

Zusammenfassung Dielektrische Messungen über einem weiten Frequenzbereich stellen die eine Methode dar, um unter Anwendung verhältnismässig nicht-intrusiver Fühler die Aushärtung von Duroplasten /Epoxid usw./ verfolgen zu können. Die Messungen bilden die Grundlage für einen Pertigungsüberwachungskreis des Autoklaven, da der rheologische Zustand des Duroplast mit der Dielektrizitätskonstanten // und dem dielektrischen Verlustfaktor /tan/ in Verbindung gebracht werden kann. Vorliegende Arbeit berichtet über weitere Untersuchungen unseres Laboratoriums über den Zusammenhang zwischen mechanischem und dielektrischen Verhaltens während der Aushärtung.

---

120–230°. 2 3590 . . . 150°, . .