Laser dye stability. Part 4

Changes in the absorption of a dye laser solution are examined after excitation with a xenon flashlamp. It is found that the rate of bleaching as a function of the total input energy of coumarin or quinolone dyes in ethanol increases in direct proportion to the dye concentration. This relationship suggests that the dye reacts with a photoproduct of the solvent rather than being directly decomposed by the xenon flash. We have measured the conversion of the dye to form products,P, absorbing at the lasing wavelength. Results correspond to the dye reacting with a precursor ofP to form either insoluble products or ones not absorbing at the lasing wavelength. Thus larger total amounts of bleached dye do not proportionately increaseP, and hence do not proportionately inhibit lasing. Furthermore, we find thatP increases with the total input energy fairly independent of the rate of bleaching for a given bicyclic dye in an alcohol solution.     

Search for 8+ strength in 16O via the 12C(α, α2)12C1(7.66 MeV) reaction

Closely spaced angular distributions have been measured for the ${}^{12}\text{C}\text{(α, α}{}_2\text{)}{}^{12}\text{C}\text{1(7.66}\text{MeV}\text{)}$ reaction between E_α = 17.39 and 20.5 MeV in a search for 8⁺ strength in ¹⁶O. No evidence of 8⁺ strength is found, but evidence is found for a narrow 7^? resonance at 21.52 MeV excitation.     

Oscillating cracks in glassy films on silicon substrates

Cracks that propagate with near-perfect sinusoidal form are reported in amorphous silicon-rich silica films deposited onto (001) silicon substrates by plasma-enhanced chemical vapour deposition and subjected to thermal annealing. The cracks are shown to result from high tensile stresses that develop in the film during thermal annealing at temperatures in the range up to 700°C, a process shown to be correlated with the loss of hydrogen from the films. Two distinct modes of crack propagation are reported: straight cracks that propagate along directions parallel to [100] cube-edge directions in the substrate, and oscillating cracks that propagate with sinusoidal form parallel to [110] diagonal directions. Sections through the cracks show that the oscillating cracks have a complex three-dimensional structure that extends through the glassy film and into the underlying silicon substrate. This involves a correlated oscillation between the crystallographic orientation of the crack in the surface plane and that of the crack extension into the substrate. Whereas a complete theoretical treatment of this behaviour would be extremely complicated, a simple theory is developed to demonstrate that an oscillating crack has a minimum energy per unit length for a particular wavelength and amplitude that depends upon the physical parameters of both film and substrate. The energy at this minimum is shown to be lower than that of a straight crack for certain parameter ranges so that the oscillating geometry is preferred.     

TOF-SIMS investigation of Streptomyces coelicolor, a mycelial bacterium

Streptomyces coelicolor is a mycelial microorganism that produces several secondary metabolites, including antibiotics. The physiology of the organism has largely been investigated in liquid cultures due to ease of monitoring different physiological parameters and more homogeneous culture conditions. However, solid cultures reflect the natural physiology of the microorganism better, given that in its natural state it grows in the soil. Imaging mass spectrometry with TOF-SIMS and C₆₀⁺ primary ion beams offers a potential route to studying chemical changes at the molecular level, both intracellular and extracellular that can help in understanding the natural physiology of the microorganism. Here, we report the application of the technique for studying the lateral distribution of the chemical species detected in a population, grown in both liquid and solid cultures. The capability of the technique for studying biological systems with minimal system intervention is demonstrated.     

Nature,origin and effect of dislocations in epitaxial semiconductor layers

The paper is concerned with the manner in which dislocations in Group 3–5 compound epitaxial layer structures are generated, propagate and interact with one another. The different types of epitaxial layer and dislocation behaviour are initially reviewed. The examination methods used are based on electron microscopy. The TEM is used in conjunction with plan-view, cross-section, and angle-lap specimens to determine the detailed nature and three-dimensional distribution of the dislocations. The SEM EBIC and CL methods are used with bulk specimens to obtain electrical and luminescent information. In particular, the latter methods give micrograph-type images showing dark spots and lines corresponding to individual dislocations, the contrast arising because of electrical carrier recombination taking place at the dislocations. These methods are used to investigate the dislocation behaviours occurring in a wide range of specimens including homo- and hetero-epitaxial layers, and embracing small, medium and large mismatches. An attempt is made to obtain quantitative data concerning the processes occurring. The work has provided a better understanding in many instances, and sometimes allowed the occurrence of the dislocations to be better controlled. An example is given of the application of the results to the improvement in the quality of a GaAs transmission photocathode device-type structure.     

Fabrication of polymer microsphere particle standards containing trace explosives using an oil/water emulsion solvent extraction piezoelectric printing process

We present a methodology for fabricating polymer microspheres using inkjet printing of a biodegradable polymer containing either high explosives or high explosive simulant. Poly(dl-lactide/glycolide) 85:15 (PLGA) microsphere production is based on an oil/water emulsion solvent extraction process. The inkjet printing process allows for precise control of the microsphere diameter and the chemical composition. The microspheres can be used as calibrants or verification standards for explosives trace detection instruments. Gas chromatography/mass spectrometry analysis demonstrated that the composition of the microspheres was consistent with predicted concentrations based on the amount of analyte incorporated into the polymer solution and the inkjet operating parameters. We have demonstrated that the microspheres can be fabricated with a mass fraction of 70% of an analyte compound.     

An in vitro comparison of microdialysis relative recovery of Met- and Leu-enkephalin using cyclodextrins and antibodies as affinity agents

Cyclodextrins and antibodies have been used as affinity agents to improve relative recovery during microdialysis sampling. Two neuropeptides, methionine-enkephalin (ME) and leucine-enkephalin (LE), were chosen to compare the use of cyclodextrins and antibodies as possible affinity agents for improving their relative recovery across polycarbonate and polyethersulfone membranes during in vitro sampling. Cyclodextrins (CD) including β-CD, 2-hydroxypropyl-β-cyclodextrin (2HPβ-CD), and γ-CD gave improvements of relative recovery for both peptides of less than 2-fold as compared to controls. Comparisons of relative recovery between tyrosine–glycine–glycine, tyrosine, and phenylalanine using different cyclodextrins in the perfusion fluid were also obtained. Inclusion of an antibody against met-enkephalin in the microdialysis perfusion fluid resulted in relative recovery increases of up to 2.5-fold. These results show that using antibodies as affinity agents during microdialysis sampling may be more effective agents to improve the relative recovery of these opioid neuropeptides.     

Rapid multivariate analysis of 3D ToF‐SIMS data: graphical processor units (GPUs) and low‐discrepancy subsampling for large‐scale principal component analysis

Principal component analysis (PCA) and other multivariate analysis methods have been used increasingly to analyse and understand depth‐profiles in XPS, AES and SIMS. For large images or three‐dimensional (3D) imaging depth‐profiles, PCA has been difficult to apply until now simply because of the size of the matrices of data involved. In a recent paper, we described two algorithms, random vector 1 (RV1) and random vector 2 (RV2), that improve the speed of PCA and allow datasets of unlimited size, respectively. In this paper, we now apply the RV2 algorithm to perform PCA on full 3D time‐of‐flight SIMS data for the first time without subsampling. The dataset we process in this way is a 128 × 128 pixel depth‐profile of 120 layers, each voxel having a 70 439 value mass spectrum associated with it. This forms over a terabyte of data when uncompressed and took 27 h to process using the RV2 algorithm using a conventional windows desktop personal computer (PC). While full PCA (e.g. using RV2) is to be preferred for final reports or publications, a much more rapid method is needed during analysis sessions to inform decisions on the next analytical step. We have therefore implemented the RV1 algorithm on a PC having a graphical processor unit (GPU) card containing 2880 individual processor cores. This increases the speed of calculation by a factor of around 4.1 compared with what is possible using a fast commercially available desktop PC having central processing units alone, and full PCA is performed in less than 7 s. The size of the dataset that can be processed in this way is limited by the size of the memory on the GPU card. This is typically sufficient for two‐dimensional images but not 3D depth‐profiles without sampling. We have therefore examined efficient sampling schemes that allow a good approximate solution to the PCA problem for large 3D datasets. We find that low‐discrepancy series such as Sobol series sampling gives more rapid convergence than random sampling, and we recommend such methods for routine use. Using the GPU and low‐discrepancy series together, we anticipate that any time‐of‐flight SIMS dataset, of whatever size, can be efficiently and accurately processed into PCA components in a maximum of around 10 s using a commercial PC with a widely available GPU card, although the longer RV2 approach is still to be preferred for the presentation of final results, such as in published papers. Copyright © 2016 The Authors Surface and Interface Analysis Published by John Wiley & Sons Ltd