Etude de la chloration du polychlorure de vinyle en fonction de sa tacticite

Polyvinyl chloride samples of various tacticity have been prepared and photochlorinated in CCl₄ for 4 hr. The chlorination degree correlates directly with the degree of syndiotacticity. Initial PVC with syndiotacticity about 56 per cent, which can be regarded as alternate sequences of syndiotactic and isotactic diads, is quickly chlorinated. The mechanism of chlorine attack on the macromolecula is directly connected with the stereoregularity.     

Sandwich structures at oil-water interfaces under alkaline conditions

Equilibrium liquid crystal (LC) layer on an interface between crude oils and water was observed at high pH. This layer is composed mainly of sodium naphthenates produced in situ at the water/oil interface. Transient LC layer was also evolved at the interface of aqueous phase of sodium hydroxide solutions and oleic phase of naphthenic acid (NA) solutions as result of a chemical reaction between NaOH and NA. This chemical reaction causes transport process resulting in a disturbance of the interface. Optical observation of this interface disturbance reviled that the interface covered with LC shows considerably lower flexibility as compared to LC free interface. The LC layer eventually dissolves in the water phase at low oil-to-water ratio, while at high oil-to-water ratio it can form an equilibrium phase, which spreads spontaneously at the oil-water interface.     

Unique structural properties of the Mg-Al hydrotalcite solid base catalyst: an in situ study using Mg and Al K-edge XAFS during calcination and rehydration

The changes in the layered structure of Mg-Al hydrotalcite (Mg/ Al = 2) during heat treatment have been investigated by using in situ XAFS simultaneously at the Mg and Al K-edges. The development of unique in situ instrumentation allowed the coordination environments at both the Mg and Al centers to be monitored as a function of the temperature and heat treatment. The results of this study show that the hydrotalcite structure is highly flexible, and should lead to the further development of hydrotalcites as new solid basic catalysts. Moreover, the Mg and Al cations in the cation layers show different behavior as a function of temperature. The coordination of some octahedral Al ions decreases already at a temperature of 425 K, whereas the coordination about Mg does not show any modification at this temperature. However, hydrotalcite treated at 425 K, followed by cooling down to room temperature resulted in a complete reversal to the original octahedral Al coordination. It is proposed that Al-OH bond breakage occurs at 425 K, without the evolution of H2O. This bond is restored after cooling to room temperature. The actual dehydroxylation of hydrotalcite commences between 425 and 475 K, as indicated by a change in coordination of both the Mg and Al centers. This is accompanied by the evolution of H2O molecules and the changes are hence irreversible without the presence of excess water. Heat treatment at 725 K leads to the development of an MgO-like phase (octahedral Mg) and a mixed octahedral/tetrahedral Al phase. A subsequent rehydration at room temperature entirely restores the original coordination about the Al and Mg centers of hydrotalcite to a distance of 15 A, to which XAFS spectroscopy is sensitive.     

Thermodynamic parameters for the molecular inclusion reaction of dulcin with beta-cyclodextrin. spectrofluorimetric determination of dulcin

The inclusion of dulcin in alpha- and beta-cyclodextrin has been studied by fluorescence spectroscopy. To quantitatively describe complex formation between the beta-cyclodextrin and dulcin, an association constant of 290 M(-1) at 21 degrees was obtained. The thermodynamics associated with the complex formation between dulcin and beta-cyclodextrin in aqueous solution has been studied. The obtained value of DeltaG(0) = -13.7 kJ/mole at 21 degrees , together with DeltaH(0) = -33.6 +/- 2.3 kJ/mole and DeltaS(0) = -67.2 +/-8.3 Jmole(-1) K(-1) indicate that dulcin has a very marked tendency to associate with beta-cyclodextrin in water. The inclusion complex of dulcin in beta-cyclodextrin has been used to determine dulein in the range 0.13-5 mug/ml the method has been applied to determine dulcin in soft drinks.     

Properties and analytical applications of the heteropolymolybdates of phosphorus, arsenic, silicon and germanium-IV Determination of phosphomolybdic and silicomolybdic acids via the molybdenum content, with phenylfluorone

Procedures are proposed for the determination of phosphorus and silicon in the ppM range, by extraction of phosphomolybdic and silicomolybdic acids with organic solvent, decomposition of the complex and spectrophotometric determination of its molybdenum content.     

Dissociation and rate constants of some human liver alcohol dehydrogenase isoenzymes.

ADH from human liver forms binary complexes with NADH, associated with a blue shift of the peak of the fluorescence emission of NADH. The wavelength shift is the same for all isoenzymes but the accompanying intensification of the fluorescence is different. The fluorescence is further increased by the formation of the very tight ternary enzyme-NADH-isobutyramide complexes. These properties are similar to those for the horse liver ADH, as well as the molecular weight of E=40 000 per active site of the dimer molecule (EE). "Stopped-flow" determined velocity constants (ER in equilibrium E+R) were found to be in good agreement with ethanol activity constants previously determined by activity measurement, confirming the validity of the ordered ternary complex mechanism also for the human ADH. No single isoenzyme activity as high as that reported by Mourad and Woronick or Drum has been found.     

Complex study of nickel skeleton catalysts: V. Study of novel non-pyrophoric nickel skeleton catalysts by derivatograph

The structure and properties of non-pyrophoric skeleton catalysts prepared from NiSi, NiAlSi, NiMg and NiZn alloys have been studied—apart from other thermal methods—by means of the derivatograph.Our experimental results have contributed to the explanation of the non-pyrophoric behaviour of these catalysts. We demonstrated that the desorption of the hydrogen content in our catalysts is not accompanied by the oxidation of active nickel. This oxidation takes place only at higher temperatures, above 200°C, at a rate proportional to the amount of active nickel.Other constituents of the catalysts (adsorbed water, hydroxide content) were also determined from the experimental data. The outstandingly high Mg(OH)₂ content of the NiMg catalyst indicates that its structure is dissimilar: Mg(OH)₂ also acts as support for the catalyst.     

Isotope gas analysis of tritium-labelled organic compounds based on pyrolytical decomposition

Summary A procedure has been developed for the activity measurement of tritium-labelled organic compounds in the gas phase. The organic compounds are pyrolysed in hydrogen carrier gas at 1150° and the decomposition products are swept through a carbon packing in accordance with the principle of the oxygen determination developed byUnterzaucher andBürger. The radioactive gas mixture obtained from the sample is swept by the hydrogen carrier gas flowing continuously through the reactor into a proportional counter tube, after the addition of propanebutane counter gas. By closure of the counter tube at a suitable moment, the radioactive gas is quantitatively trapped in the counter tube. The activity is measured in the limited proportional region. No memory effect occurs. The preparation of the sample requires 12 minutes; the relative standard deviation of analysis is <0.5%.

---

Zusammenfassung Ein Verfahren zur Aktivitätsbestimmung bei tritium-markierten organischen Verbindungen in der Gasphase wurde ausgearbeitet. Die organischen Substanzen werden in Wasserstoff als Trägergas bei 1150° pyrolysiert. Die Zersetzungsprodukte werden wie bei der Sauerstoffbestimmung nachUnterzaucher bzw.Bürger über eine Kohleschicht geleitet. Das radioaktive Gas-gemisch aus der Probe gelangt mit dem kontinuierlich strömenden Trägergas in ein Proportionalzählrohr, nachdem Propan-Butan-Zählgas zugesetzt wurde. Man schließt das Zählrohr im richtigen Augenblick, um das radioaktive Gas quantitativ zu erfassen. Die Aktivität wird im Proportionalbereich gemessen. Ein Memory-Effekt tritt nicht auf. Die Vorbereitung der Probe beansprucht 12 Minuten. Die relative Standardabweichung ist kleiner als 0,5%.

     

Differentiation between dexamethasone and betamethasone in a mixture using multiple mass spectrometry

Direct gas chromatographic methods to analyse phenylurea pesticides are discouraged by the thermal instability of these compounds, that in conventional hot splitless inlet systems leads to extensive and irreproducible formation of isocyanates and amines. However a careful control of the operating conditions, like the inlet temperature, the pressure and the presence of suitable chemical additives (as acetic acid, low-molecular-mass amines, organic anhydrides) can either: (i) minimise the thermal decomposition enabling the direct GC-MS analysis of phenylureas, or (ii) lead to reproducible conversion to isocyanates. Experimental design was employed to study the effect of the experimental variables on the thermal transformation of phenylurea pesticides in splitless inlet system. Two strategies were alternatively optimised: (i) the minimisation of degradation reactions to increase the signal of phenylureas; (ii) the maximisation of the degradation to isocyanates that are in turn determined. The maximal yields in isocyanate were obtained with high inlet temperatures, low carrier flows in the injection phase and the presence of acetic anhydride. By contrast, the use of relatively low inlet temperatures, high carrier flows during the injection and the presence of an amine maximise the response of the parent compounds.     

A non local density functional calculation of the diamagnetic susceptibilities and other electronic properties of noble gases and closed-shell ions

The non local weighted-density approximation (WDA) to the exchange-correlation potentialV _xc (r) is used to compute electron densities, ionization potentials and electron affinities of several atoms and ions. Especial care is taken in calculating and discussing 〈r ²〉 in noble gas atoms. Good results are obtained for all those quantities, but it is critical that the WDA is applied in such a way that it preserves the correct larger behaviour ofV _xc (r). A comparison of the calculated electron density with that of the Hartree-Fock method shows the effects of coulomb correlation. The density rearrangements upon the introduction of correlation agree qualitatively with the results of Configuration-Interaction calculations