Macro-structural Deformation of Kevlar® 40 Aramid Fibers

Kevlar® 49 “pleating” has been monitored, via measurement of the corresponding light diffraction intensity while stressidg a single filament. The structure responds to stress by opening up, with most of the diffracted intensity disappearing at about 60% of the breaking stress. The pleating is restored upon relaxation.     

Kinetics and equilibria of sulfur dioxide sorption in kapton polyimide

The kinetics and equilibria of SO₂ sorption in Kapton polyimide film have been measured at 25°C for pressures up to 58 cm Hg using a quartz spring balance. The observed equilibria are described well by the dual-mode model for sorption of penetrants in glassy polymers. Observed hysteresis in sorption-desorption cycling indicates that the diffusivity of SO₂ increases markedly with increasing local penetrant concentration in the polymer. The concentration dependence of the effective average diffusion coefficient is described well by an expression from dual-mode theory. The Langmuir component of the sorption population has an extremely low mobility compared to that of the Henry's law component; in fact, the so-called “total immobilization” limiting case, which assigns a zero diffusion coefficient to this component, appears to be satisfactory under the conditions studied. These results, coupled with published results for other penetrants, suggest that the degree of immobilization of the Langmuir population depends to a great extent on the condensability and/or the molecular size of the penetrant. Predictions of the SO₂ diffusion time lag and permeability in Kapton as functions of the upstream SO₂ pressure are presented and discussed in terms of the dual-mode theory.     

Diode-pumped 1-W continuous-wave Er:YAG 3-mum laser

We have demonstrated 1.15 W of Gaussianlike (M(2) = 2) cw output at 2.94 mum from a diode laser end-pumped monolithic laser crystal composed of Er-doped yttrium aluminum garnet (YAG) bonded to undoped YAG. The laser was pumped with two polarization-coupled 2.5-W flared laser diodes that provided a 45-mum pump waist with a low N.A. (<0.04) . Output at 2.94 mum was generated with a 34% slope efficiency and a greater-than-unity quantum efficiency.     

Influence of surface roughness and contact load on friction coefficient and scratch behavior of thermoplastic olefins

To study the effects of surface roughness and contact load on the friction behavior and scratch resistance of polymers, a set of model thermoplastic olefins (TPO) systems with various surface roughness (R_a) levels were prepared and evaluated. It is found that a higher R_a corresponds to a lower surface friction coefficient (μ_s). At each level of R_a, μ_s gets larger as contact load increases, with a greater increase in μ_s as R_a level increases. It is also observed that with increasing contact load and increasing R_a, the μ_s tend to level off. In evaluating TPO scratch resistance, a lower μ_s would delay the onset of ductile drawing-induced fish-scale surface deformation feature, thereby raising the load required to cause scratch visibility. However, as the contact load is further increased, the μ_s evolves to become scratch coefficient of friction (SCOF) as significant sub-surface deformation and tip penetration occur and material displacement begins, i.e., ploughing. No dependence of R_a and μ_s on the critical load for the onset of ploughing is observed. In this work, the distinction between μ_s and SCOF will be illustrated. Approaches for improving scratch resistance of polymers via control of R_a are also discussed.     

Neutron scattering study of the phase transition in s-triazine at high pressure

The elastic transition in s-triazine (C₃N₃H₃) from a trigonal ($\text{R}\text{3}\text{c}$) high temperature (low pressure) structure to a monoclinic (C2/c) low temperature (high pressure) phase has been investigated at pressures up to 5 kbar using neutron scattering techniques. Neutron diffraction was used to measure the pressure dependence of the order parameter and inelastic scattering to study the softening of the transverse acoustic phonon modes on three isotherms. In both cases the effect of pressure on the transition is found to be described primarily by that on the temperature of the transition.     

Determination of Shrink-Resist Polymers on Wool Fabric by DSC

Many reactive polymers used to shrink-resist wool fabric are derived from poly(propylene oxide) (PPO). Shrink-resist polymers derived from PPO were identified on wool by their oxidation characteristics using differential scanning calorimetry. The amount of PPO-based polymers on the fabric was estimated using isothermal scans after calibration with suitable standards. Polyacrylates applied with the PPO did not interfere with the oxidation of the PPO component, but a polyester-polyurethane dispersion suppressed PPO oxidation and made identification and estimation of the PPO component unreliable. The technique was used to determine the distribution of shrink-resist polymer on men's trousers.     

铌酸锶钡薄膜的微结构与电光性能的研究

本文叙述了使用溶胶凝胶法在MgO(0 0 1)的衬底上制备铌酸锶钡薄膜的过程 ,膜层厚度可达 5 μm。通过X射线衍射、摇摆曲线、扫描、拉曼散射光谱等方法研究了薄膜的微结构性能 ,实验发现 ,铌酸锶钡薄膜具有了较好的 (0 0 1)方向的优先取向性能 ,并且随着薄膜厚度的增加 ,其晶体取向性也会随之不断改进。熔石英的透明衬底上生长的SBN薄膜具有较大的电致双折射效应 ,其有效电光系数能够高达 6 6 2× 10 -11m/V。