Photo-oxidation behaviour of polyethylene/polyamide 6 blends filled with organomodified clay: Improvement of the photo-resistance through morphology modification

The impact of small amounts of organomodified clay (OMMT) on the photo-degradation behaviour of two blends obtained by mixing either low-density polyethylene (LDPE) or high density polyethylene (HDPE) with polyamide 6 (PA6) (LDPE/PA6 and HDPE/PA6 75/25 wt-%) was studied. The complex photo-degradation behaviour was followed by monitoring the main physical-mechanical properties of the blends. In particular, mechanical and spectroscopic tests were performed in conditions of accelerated artificial aging. An accurate mechanical and morphological characterization was previously carried out. The presence of the OMMT promotes the unexpected formation of a co-continuous morphology for the HDPE/PA6 blend without significantly improving the interfacial adhesion. Differently, the OMMT-filled LDPE/PA6 blend exhibits a finely distributed morphology, and some apparent improvement of the interfacial adhesion was noticed. Probably due to these differences in microstructure, a different impact of the nanoparticles on the photo-resistance behaviours was observed for the two families of samples. In particular, the HDPE-based nanocomposite blend exhibits an improved photo-resistance, while the opposite occurs for the LDPE-based system.     

A highly water-soluble 2:1 beta-cyclodextrin-fullerene conjugate

A novel 2:1 (permethylated-beta-cyclodextrin)-fullerene conjugate has been synthesised; highly soluble in cold water with formation of aggregates, it displays a negative solubility coefficient and has a partition coefficient between octanol and water (Log P = 1.58) in the suitable range for biological studies.     

Parity-violating electron deuteron scattering and the proton's neutral weak axial vector form factor

We report on a new measurement of the parity-violating asymmetry in quasielastic electron scattering from the deuteron at backward angles at Q2=0.038 (GeV/c)2. This quantity provides a determination of the neutral weak axial vector form factor of the nucleon, which can potentially receive large electroweak corrections. The measured asymmetry A=-3.51+/-0.57 (stat)+/-0.58 (syst) ppm is consistent with theoretical predictions. We also report on updated results of the previous experiment at Q2=0.091 (GeV/c)2, which are also consistent with theoretical predictions.     

Transverse asymmetry AT' from the quasielastic 3He(e,e') process and the neutron magnetic form factor

We have measured the transverse asymmetry A(T') in 3He(e,e(')) quasielastic scattering in Hall A at Jefferson Laboratory with high precision for Q2 values from 0.1 to 0.6 (GeV/c)(2). The neutron magnetic form factor G(n)(M) was extracted based on Faddeev calculations for Q2 = 0.1 and 0.2 (GeV/c)(2) with an experimental uncertainty of less than 2%.     

Parity violation in elastic electron-proton scattering and the Proton's strange magnetic form factor

We report a new measurement of the parity-violating asymmetry in elastic electron scattering from the proton at backward scattering angles. This asymmetry is sensitive to the strange magnetic form factor of the proton as well as electroweak axial radiative corrections. The new measurement of A = -4.92+/-0.61+/-0.73 ppm provides a significant constraint on these quantities. The implications for the strange magnetic form factor are discussed in the context of theoretical estimates for the axial corrections.     

Selective localization of organoclay and effects on the morphology and mechanical properties of LDPE/PA11 blends with distributed and co‐continuous morphology

A study was made on the effect of small amounts of organically modified clay on the morphology and mechanical properties of blends of low‐density polyethylene and polyamide 11 at different compositions. The influence of the filler on the blend morphology was investigated using wide angle X‐ray diffractometry, scanning and transmission electron microscopy and selective extraction experiments. The filler was found to locate predominantly in the more hydrophilic polyamide phase. Although such uneven distribution does not have a significant effect on the onset of phase co‐continuity of the polymer components, it brings about a drastic refinement of the microstructure for the blends both with droplets/matrix and co‐continuous morphologies. In addition to the expected reinforcing action of the filler, the resulting fine microstructure plays an important role in enhancing the mechanical properties of the blends. This is essentially because of a good quality of stress transfer across the interface between the constituents, which also seems to benefit for a good interfacial adhesion promoted by the filler. Our results provide the experimental evidence for the capabilities of nanoparticles added to multiphase polymer systems to act selectively as a reinforcing agent for specific domains of the material and as a medium able to assist the refinement of the polymer phases during mixing. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 48: 600–609, 2010     

Effect of metal ions in organic synthesis. Part XXXI. Synthesis of new 3-carbonyl- and 3-carboxy-1-heterocyclaminopyrroles by copper(II) chloride-catalyzed reaction of heterocyclic azoalkenes

The direct synthesis of a new class of unknown 1-heterocyclamino-3-carbonylpyrroles and 1-heterocyclamino-3-carboxypyrroles by copper(II) chloride-catalyzed reaction of heterocyclic conjugated azoalkene derivatives with β-diketones and β-ketoesters is reported.