Adsorption isotherms of cellulose-based polymers onto cotton fibers determined by means of a direct method of fluorescence spectroscopy

We present a novel method for the measurement of polymer adsorption on fibers by employing fluorescently labeled polymers. The method itself can be used for any compound that either shows fluorescence or can be labeled with a fluorescent dye, which renders it ubiquitously applicable for adsorption studies. The main advantage of the method is that the choice of adsorbent is not limited to flat surfaces, thereby allowing the investigation of fibrous and porous systems. As an example of high interest for application we determined the adsorption isotherms of various polysaccharide-based polymers with different charges and different substituents on cotton fibers. These experiments show that the extent of adsorption depends not only on the charge conditions but also very much on the specific interactions between the polymer and fiber. For instance, the cationic hydroxyethyl cellulose can become bound to an extent similar to that of the anionic alginate, while the anionic carboxymethyl cellulose of similar charge density adsorbs much less under these conditions. This shows that the adsorption of polymers depends subtly on the details of the interaction between the polymer and fiber but can be determined with good precision with our direct fluorescence method.     

Membraneless, room-temperature, direct borohydride/cerium fuel cell with power density of over 0.25 W/cm2

The widespread adoption and deployment of fuel cells as an alternative energy technology have been hampered by a number of formidable technical challenges, including the cost and long-term stability of electrocatalyst and membrane materials. We present a microfluidic fuel cell that overcomes many of these obstacles while achieving power densities in excess of 250 mW/cm(2). The poisoning and sluggish reaction rate associated with CO-contaminated H(2) and methanol, respectively, are averted by employing the promising, high-energy density fuel borohydride. The high-overpotential reaction of oxygen gas at the cathode is supplanted by the high-voltage reduction of cerium ammonium nitrate. Expensive, ineffective membrane materials are replaced with laminar flow and a nonselective, porous convection barrier to separate the fuel and oxidant streams. The result is a Nafion-free, room-temperature fuel cell that has the highest power density per unit mass of Pt catalyst employed for a non-H(2) fuel cell, and exceeds the power density of a typical H(2) fuel cell by 50%.     

Structural evolution in the isotropic channel of a water-nonionic surfactant system that has a disconnected lamellar phase: a 1H NMR self-diffusion study

We showed in a previous study that a water-nonionic surfactant system, where the surfactant is a 9:1 mixture of tetraethylene glycol monodecyl ether (C(10)E(4)) and pentaethylene glycol monodecyl ether (C(10)E(5)), forms a disconnected lamellar (L(α)) phase. Thus, the isotropic phase spans the whole concentration range from the water-rich L(1) region to the surfactant-rich L(2) region of the phase diagram. The L(1) and L(2) regions are connected via an isotropic channel that separates the two regions of the L(α) phase. In this letter, we monitored the structural evolution of the isotropic phase along a path through this isotropic channel via (1)H NMR self-diffusion measurements. We used this technique because it enables us to distinguish between discrete and bicontinuous structures by comparing the relative self-diffusion coefficients (obstruction factors) D/D(0) of the solvents (i.e. of water and surfactant in the present case). We found that the obstruction factor of water decreases whereas the obstruction factor of the surfactant increases with increasing surfactant concentration and increasing temperature. This trend is interpreted as the transition from a water-continuous L(1) region, which contains discrete micelles, to a bicontinuous structure, which may extend to very high surfactant concentrations. Although there is good evidence of bicontinuity over a broad concentration range, there is no evidence of inverse micelles or any other microstructure at the highest concentration studied in the surfactant-rich L(2) phase.     

Molecular dynamics reveal that isoDGR-containing cyclopeptides are true αvβ3 antagonists unable to promote integrin allostery and activation

Ain't got that swing(-out): The cyclopeptide isoDGR is emerging as a new αvβ3 integrin binding motif. Agreement between the results of computational and biochemical studies reveals that isoDGR-containing cyclopeptides are true αvβ3 integrin antagonists that block αvβ3 in its inactive conformation (see scheme). isoDGR-based ligands may give αvβ3 antagonists without paradoxical effects.     

Preparation of both enantiomers of β-(3,4-dihydroxybenzyl)-β-alanine, higher homologues of Dopa

β²-(3,4-Dihydroxybenzyl)-β-alanine [β²-Homo-Dopa, 1] is a novel β-amino acid homologue of Dopa, the most successful therapeutic agent in the treatment of Parkinson's disease. Enantioenriched (R)-1 and (S)-1 were obtained via the diastereoselective alkylation of enantiopure pyrimidinone (R)- and (S)-3, chiral derivatives of β-alanine, with veratryl iodide. The major diastereomeric products (2S,5R)-4 and (2R,5S)-4 were hydrolyzed with 57% HBr, and the desired β-amino acids were purified by silica gel chromatography. Alternatively, enantioenriched (R)- and (S)-1 were prepared by means of the highly diastereoselective alkylation (3,4-dimethoxybenzyl iodide) of open-chain β-aminopropionic acid derivatives (R,R,S)-8 and (S,S,R)-8 containing the chiral auxiliary α-phenylethylamine. Finally, nearly enantiopure (R)- and (S)-1 were obtained by resolution of racemic N-benzyloxycarbonyl-2-(3,4-dibenzyloxybenzyl)-3-aminopropionic acid, rac-12, with (R)- or (S)-α-phenylethylamine, followed by catalytic hydrogenolysis.     

Tautomerism in liquid 1,2,3-triazole: a combined energy-dispersive X-ray diffraction, molecular dynamics, and FTIR study

In this work, we report a multitechnique (energy-dispersive X-ray diffraction, computational methods, and FTIR spectroscopy) study of the tautomeric equilibrium of 1,2,3-triazole, one of the few small nitrogen-containing eterocycles liquid at room temperature. The T-2H form (C _2v symmetry) is found to be strongly favored in gas and solid phases, whereas the neat liquid gives diffraction patterns that can be interpreted satisfactorily with the structure functions calculated from some molecular dynamics results for both T-2H and T-1H tautomers, although the T-2H form gives a slightly better agreement.     

Combined Experimental and Multivariate Model Approaches for Glycoalkaloid Quantification in Tomatoes

The intake of tomato glycoalkaloids can exert beneficial effects on human health. For this reason, methods for a rapid quantification of these compounds are required. Most of the methods for α-tomatine and dehydrotomatine quantification are based on chromatographic techniques. However, these techniques require complex and time-consuming sample pre-treatments. In this work, HPLC-ESI-QqQ-MS/MS was used as reference method. Subsequently, multiple linear regression (MLR) and partial least squares regression (PLSR) were employed to create two calibration models for the prediction of the tomatine content from thermogravimetric (TGA) and attenuated total reflectance (ATR) infrared spectroscopy (IR) analyses. These two fast techniques were proven to be suitable and effective in alkaloid quantification (R² = 0.998 and 0.840, respectively), achieving low errors (0.11 and 0.27%, respectively) with the reference technique.     

Generation and reactivity of ketyl radicals with lignin related structures. On the importance of the ketyl pathway in the photoyellowing of lignin containing pulps and papers

[reaction: see text] Ketyl radicals with lignin related structures have been generated by means of radiation chemical and photochemical techniques. In the former studies ketyl radicals are produced by reaction of alpha-carbonyl-beta-aryl ether lignin models with the solvated electron produced by pulse radiolysis of an aqueous solution at pH 6.0. The UV-vis spectra of ketyl radicals are characterized by three main absorption bands. The shape and position of these bands slightly change when the spectra are recorded in alkaline solution (pH 11.0) being now assigned to the ketyl radical anions and a pKa = 9.5 is determined for the 1-(3,4,5-trimethoxyphenyl)-2-phenoxyethanol-1-yl radical. Decay rates of ketyl radicals are found to be dose dependent and, at low doses, lie in the range (1.7-2.7) x 10(3) s(-1). In the presence of oxygen a fast decay of the ketyl radicals is observed (k2 = 1.8-2.7 x 10(9) M(-1) s(-1)) that is accompanied by the formation of stable products, i.e., the starting ketones. In the photochemical studies ketyl radicals have been produced by charge-transfer (CT) photoactivation of the electron donor-acceptor salts of methyl viologen (MV2+) with alpha-hydroxy-alpha-phenoxymethyl-aryl acetates. This process leads to the instantaneous formation of the reduced acceptor (methyl viologen radical cation, MV+*), as is clearly shown in a laser flash photolysis experiment by the two absorption bands centered at 390 and 605 nm, and an acyloxyl radical [ArC(CO2*))(OH)CH2(OC6H5)], which undergoes a very fast decarboxylation with formation of the ketyl radicals. Steady-state photoirradiation of the CT ion pairs indicates that 1-aryl-2-phenoxyethanones are formed as primary photoproducts by oxidation of ketyl radicals by MV2+ (under argon) or by molecular oxygen. Small amounts of acetophenones are formed by further photolysis of 1-aryl-2-phenoxyethanones and not by beta-fragmentation of the ketyl radicals. The high reactivity of ketyl radicals with oxygen coupled with the low rates of beta-fragmentation of the same species have an important bearing in the context of the photoyellowing of lignin containing pulps and papers.     

On the reaction of Ph2PNHPPh2 with RNCS (R=Et, Ph, p-NO2C6H4): preparation of the zwitterionic ligand EtNHC(S)Ph2P==NPPh2C(S)NEt (HSNS) and the zwitterionic metalate [(SNS)Rh(CO)

The reaction of Ph(2)PNHPPh(2) (PNP) with RNCS (Et, Ph, p-NO(2)(C(6)H(4))) gives addition products resulting from the attack of the P atoms of PNP on the electrophilic carbon atom of the isothiocyanate. When PNP is reacted with EtNCS in a 1:2 molar ratio, the zwitterionic molecule EtNHC(S)PPh(2)==NP(+)Ph(2)C(S)N(-)Et (HSNS) is obtained in high yield. HSNS can be protonated (H(2)SNS(+)) or deprotonated (SNS(-)), behaving in the latter form as an S,N,S-donor pincer ligand. The reaction of HSNS with [(acac)Rh(CO)(2)] (acac=acetylacetonate) affords the zwitterionic metalate [(SNS)Rh(CO)]. Other products can be obtained depending on the R group, the PNP/RNCS ratio (1:1 or 1:2), and the reaction temperature. The proposed product of the primary attack of PNP on RNCS, Ph(2)PN==PPh(2)C(S)NHR (A), cannot be isolated. Reaction of A with another RNCS molecule leads to 1:2 addition compounds of the general formula RNHC(S)PPh(2)==NP(+)Ph(2)C(S)N(-)R (1), which can rearrange into the non-zwitterionic product RNHC(S)PPh(2)==NP(S)Ph(2) (2) by eliminating a molecule of RNC. Two molecules of A can react together, yielding 1:1 PNP/RNCS zwitterionic products of the formula RNHCH[PPh(2)==NP(S)Ph(2)]PPh(2)==NP(+)Ph(2)C(S)N(-)R (3). Compound 3 can then rearrange into RNHCH[PPh(2)==NP(S)Ph(2)](2) (4) by losing a RNC molecule. When R=Et (a), compounds 1 a, 2 a (HSNS), and 4 a have been isolated and characterized. When R=Ph (b), compounds 2 b and 4 b can be prepared in high yield. When R=p-NO(2)C(6)H(4) (c), only compound 3 c is observed and isolated in high yield. The crystal structures of HSNS, [(SNS)Rh(CO)], and of the most representative products have been determined by X-ray diffraction methods.