Comprehensive chemical derivatization for gas chromatography-mass spectrometry-based multi-targeted profiling of the major phytohormones

In the present investigation we report selection of the N-methyl-N-(tert.-butydimethylsilyl)trifluoroacetamide (MTBSTFA) reagent as the most comprehensive derivatization protocol among 17 tested reactions covering trifluoroacetylation, pentafluorobenzylation, methylations, and trimethylsilylations. MTBSTFA allowed easy and robust tert.-butyldimethylsilyl derivatization of 1-aminocyclopropane-1-carboxylic acid, indole-3-acetic acid, (+/-)-jasmonic acid, salicylic acid, (+/-)-abscisic acid, meta-topolin, and trans-zeatin. Detection limits as analysed by selected ion monitoring quadrupole GC-MS were 0.2, 0.01, 1.0, 0.02, 0.3, 0.3, and 0.9 pmol of injected substance, respectively. Analysis of gibberellic acid A3, trans-zeatin riboside and (+/-)-abscisic acid-beta-D-glucopyranosyl ester was best when coupled by splitting extracts and trimethysilylation. The MTBSTFA derivatization protocol was optimised, and validated. The preparation was insensitive to 2% residual water and to < or = 1 day storage at room temperature. The final scheme was highly reproducible and successfully applied to extracts from approximately 300 mg (fresh mass) of tobacco (Nicotiana tabacum) root and Arabidopsis thaliana seedling.     

Troposelective substitutions in microsolvated systems.

The mechanism and the stereochemistry of the intracomplex "solvolysis" of the proton-bound complexes I(X)() between CH(3)(18)OH and (R)-(+)-1-aryl-ethanol (1(R)()(X)(); aryl = phenyl (X = H); pentafluorophenyl (X = F)) have been investigated in the gas phase in the 25-100 degrees C temperature range. The results point to intracomplex "solvolysis" as proceeding through the intermediacy of the relevant benzyl cation III(X)() (a pure S(N)1 mechanism). "Solvolysis" of I(H)() leads to complete racemization at T > 50 degrees C, whereas at T < 50 degrees C the reaction displays a preferential retention of configuration. Predominant retention of configuration is also observed in the intracomplex "solvolysis" of I(F)(). This picture is rationalized in terms of different intracomplex interactions between the benzylic ion III(X)() and the nucleophile/leaving group pair, which govern the timing of their reorientation within the electrostatic complex. The obtained gas-phase picture is discussed in the light of related gas-phase and solution data. It is concluded that the solvolytic reactions are mostly governed by the lifetime and the dynamics of the species involved and, if occurring in solution, by the nature of the solvent cage. Their rigid subdivision into the S(N)1 and S(N)2 mechanistic categories appears inadequate, and the use of their stereochemistry as a mechanistic probe can be highly misleading.     

Lignin peroxidase-catalyzed oxidation of nonphenolic trimeric lignin model compounds: fragmentation reactions in the intermediate radical cations

The H(2)O(2)-promoted oxidations of the two nonphenolic beta-O-aryl lignin model trimers 1 and 2, catalyzed by lignin peroxidase (LiP) at pH = 3.5, have been studied. The results have been compared with those obtained in the oxidation of 1 and 2 with the genuine one-electron oxidant potassium 12-tungstocobalt(III)ate. These models present a different substitution pattern of the three aromatic rings, and by one-electron oxidation, they form radical cations with the positive charge, which is localized in the dialkoxylated ring as also evidenced by a pulse radiolysis study. Both the oxidations with the enzymatic and with the chemical systems lead to the formation of products deriving from the cleavage of C-C and C-H bonds in a beta position with respect to the radical cation with the charge residing in the dialkoxylated ring (3,4-dimethoxybenzaldehyde (5) and a trimeric ketone 6 in the oxidation of 1 and a dimeric aldehyde 8 and a trimeric ketone 9 in the oxidation of 2). These products are accompanied by a dimeric aldehyde 7 in the oxidation of 1 and 4-methoxybenzaldehyde (10) in the oxidation of 2. The unexpected formation of these two products has been explained by suggesting that 1.+ and 2.+ can also undergo an intramolecular electron transfer leading to the radical cations 1a.+ and 2a.+ with the charge residing in a monoalkoxylated ring. The fast cleavage of a C-C bond beta to this ring, leading to 7 from 1.+ and to 10 from 2.+, is the driving force of the endoergonic electron transfer. A kinetic steady-state investigation of the LiP-catalyzed oxidation of the trimer 2, the dimeric model 1-(3,4-dimethoxyphenyl)-2-phenoxy-1-ethanol (4), and 3,4-dimethoxybenzyl alcohol (3) has indicated that the turnover number (k(cat)) and the affinity for the enzyme decrease significantly by increasing the size of the model compound. In contrast, the three substrates exhibited a very similar reactivity toward a chemical oxidant [Co(III)W]. This suggests a size-dependent interaction of the enzyme with the substrate which may influence the efficiency of the electron transfer.     

Low-Cost Potentiometric Sensor for Chloride Measurement in Continuous Industrial Process Control

Recently, the new updates in legislation about drinking water control and human health have increased the demand for novel electrochemical low-cost sensors, such as potentiometric ones. Nowadays, the determination of chloride ion in aqueous solutions has attracted great attention in several fields, from industrial processes to drinking water control. Indeed, chloride plays a crucial role in corrosion, also influencing the final taste of beverages, especially coffee. The main goal is to obtain devices suitable for continuous and real-time analysis. For these reasons, we investigated the possibility to develop an easy, low-cost potentiometric chloride sensor, able to perform analysis in aqueous mediums for long immersion time and reducing the need of periodic calibration. We realized a chloride ion selective electrode made of Ag/AgCl sintered pellet and we tested its response in model solutions compatible with drinking water. The sensor was able to produce a stable, reproducible, and accurate quantification of chloride in 900 s, without the need for a preliminary calibration test. This opens the route to potential applications of this sensor in continuous, in situ, and real time measurement of chloride ions in industrial processes, with a reduced need for periodic maintenance.     

Novel Iron Oxide Nanoparticles Induce Ferroptosis in a Panel of Cancer Cell Lines

The use of nanomaterials rationally engineered to treat cancer is a burgeoning field that has reported great medical achievements. Iron-based polymeric nano-formulations with precisely tuned physicochemical properties are an expanding and versatile therapeutic strategy for tumor treatment. Recently, a peculiar type of regulated necrosis named ferroptosis has gained increased attention as a target for cancer therapy. Here, we show for the first time that novel iron oxide nanoparticles coated with gallic acid and polyacrylic acid (IONP–GA/PAA) possess intrinsic cytotoxic activity on various cancer cell lines. Indeed, IONP–GA/PAA treatment efficiently induces ferroptosis in glioblastoma, neuroblastoma, and fibrosarcoma cells. IONP–GA/PAA-induced ferroptosis was blocked by the canonical ferroptosis inhibitors, including deferoxamine and ciclopirox olamine (iron chelators), and ferrostatin-1, the lipophilic radical trap. These ferroptosis inhibitors also prevented the lipid hydroperoxide generation promoted by the nanoparticles. Altogether, we report on novel ferroptosis-inducing iron encapsulated nanoparticles with potent anti-cancer properties, which has promising potential for further in vivo validation.     

Foaming and Structural Studies on the Acidic Subunit of Amaranth 11S Globulin Modified with Antihypertensive Peptides as a Function of pH and Ionic Strength

Some studies aimed at revealing the relationship between protein structure and their functional properties. However, the majority of these reports have been carried out using protein isolates. There are limited reports on the possible relationship between the functional properties and the structure of a purified protein. In this work the amaranth 11S globulin acidic subunit (AAC) and five mutations of the same protein that were modified in their variable regions with antihypertensive peptides (VYVYVYVY and RIPP), were analyzed at two ionic strength (2.9 and 17.6 g/L NaCl) and pH (3.0–7.0). Results revealed better solubility for the proteins mutated at the terminal ends (AACM.1 and AACM.4) and lower solubility for the protein inserted with RIPP peptide. Spectroscopy studies revealed an increase of β-sheet structure at high salt concentration for all proteins. It was also observed that salt concentration acted as a modulator, which allowed a better foam features for all modified proteins limiting movement of side chains and reducing red-shifted displacement of λmax. All proteins showed foam capacity ranging from 76 to 93% although foam stability was twofold better for modified proteins than for AAC at high salt concentration. This study allowed better understanding about the structural changes that influence the foaming properties of engineered proteins.     

Coffee Chlorogenic Acids Incorporation for Bioactivity Enhancement of Foods: A Review

The demand of foods with high antioxidant capacity have increased and research on these foods continues to grow. This review is focused on chlorogenic acids (CGAs) from green coffee, which is the most abundant source. The main CGA in coffee is 5-O-caffeoylquinic acid (5-CQA). Coffee extracts are currently the most widely used source to enhance the antioxidant activity of foods. Due to the solubility of CGAs, their extraction is mainly performed with organic solvents. CGAs have been associated with health benefits, such as antioxidant, antiviral, antibacterial, anticancer, and anti-inflammatory activity, and others that reduce the risk of cardiovascular diseases, type 2 diabetes, and Alzheimer’s disease. However, the biological activities depend on the stability of CGAs, which are sensitive to pH, temperature, and light. The anti-inflammatory activity of 5-CQA is attributed to reducing the proinflammatory activity of cytokines. 5-CQA can negatively affect colon microbiota. An increase in anthocyanins and antioxidant activity was observed when CGAs extracts were added to different food matrices such as dairy products, coffee drinks, chocolate, and bakery products. The fortification of foods with coffee CGAs has the potential to improve the functionality of foods.     

A Specific HPLC Method to Determine Residual HEPES in [68Ga]Ga-Radiopharmaceuticals: Development and Validation

Background: Nowadays, in Nuclear Medicine, clinically applied radiopharmaceuticals must meet quality release criteria such as high radiochemical purity and radiochemical yield. Many radiopharmaceuticals do not have marketing authorization and have no dedicated monograph within European Pharmacopeia (Ph. Eur.); therefore, general monographs on quality controls (QCs) have to be applied for clinical application. These criteria require standardization and validation in labeling and preparation, including quality controls measurements, according to well defined standard operation procedures. However, QC measurements are often based on detection techniques that are specific to a certain chromatographic system. Several radiosyntheses of [⁶⁸Ga]Ga-radiopharmaceuticals are more efficient and robust when they are performed with 2-[4-(2-hydroxyethyl)piperazin-1-yl] ethanesulfonic acid (HEPES) buffer, which is considered as an impurity to be assessed in the QC procedure, prior to clinical use. Thus, Ph. Eur. has introduced a thin-layer chromatography (TLC) method to quantify the HEPES amount that is present in [⁶⁸Ga]Ga-radiopharmaceuticals. However, this is only qualitative and has proven to be unreliable. Here we develop and validate a new high-performance liquid chromatography (UV-Radio-HPLC) method to quantify the residual amount of HEPES in ⁶⁸Ga-based radiopharmaceuticals. Method: To validate the proposed UV-Radio-HPLC method, a stepwise approach was used, as defined in the guidance document that was adopted by the European Medicines Agency (CMP/ICH/381/95 2014). The assessed parameters are specificity, linearity, precision (repeatability), accuracy, and limit of quantification. A range of concentrations of HEPES (100, 80, 60, 40, 20, 10, 5, 3 μg/mL) were analyzed. Moreover, to test the validity and pertinence of our new HPLC method, we analyzed samples of [⁶⁸Ga]Ga-DOTATOC; [⁶⁸Ga]Ga-PSMA; [⁶⁸Ga]Ga-DOTATATE; [⁶⁸Ga]Ga-Pentixafor; and [⁶⁸Ga]Ga-NODAGA-Exendin-4 from different batches that were prepared for clinical use. Results: In the assessed samples, HEPES could not be detected by the TLC method that was described in Ph. Eur. within 4 min incubation in an iodine-saturated chamber. Our developed HPLC method showed excellent linearity between 3 and 100 μg/mL for HEPES, with a correlation coefficient (R²) for calibration curves that was equal to 0.999, coefficients of variation (CV%) < 2%, and percent deviation value of bias from 100% to 5%, in accordance with acceptance criteria. The intra-day and inter-day precision of our method was statistically confirmed and the limit-of-quantification (LOQ) was 3 μg/mL, confirming the high sensitivity of the method. The amount of HEPES that was detected with our developed HPLC method in the tested [⁶⁸Ga]Ga-radiopharmaceuticals resulted well below the Ph. Eur. limit, especially for [⁶⁸Ga]Ga-NODAGA-Exendin-4. Conclusions: The TLC method that is described in Ph. Eur. to assess residual HEPES in [⁶⁸Ga]-based radiopharmaceuticals may not be sufficiently sensitive and thus unsuitable for QC release. Our new HPLC method was sensitive, quantitative, reproducible, and rapid for QCs, allowing us to exactly determine the residual HEPES amount in [⁶⁸Ga]Ga-radiopharmaceuticals for safe patient administration.