In viva PHOTODYNAMIC EFFECTS OF PHTHALOCYANINES IN A SKIN-FOLD OBSERVATION CHAMBER MODEL: ROLE OF CENTRAL METAL ION AND DEGREE OF SULFONATION

Six sulfonated metallophthalocyanines, chelated with either aluminum or zinc and sulfonated to different degrees, were studied in vivo for their photodynamic activity in a rat skin-fold chamber model. The chamber, located on the back of female WAG/Rij rats, contained a syngeneic mammary carcinoma implanted into a layer of subcutaneous tissue. Twenty-four hours after intravenous administration of 2.5 μmol/kg of one of the dyes, the chambers received a treatment light dose of 600 J/cm² with monochromatic light of 675 nm at a power density of 100 mW/ cm². During light delivery and up to a period of 7 days after treatment, vascular effects of tumor and normal tissue were scored. Tumor cell viability was determined by histology and by reimplantation of the chamber contents into the skin of the same animal, either 2 h after treatment or after the 7 day observation period. Vascular effects of both tumor and subcutaneous tissue were strongest with dyes with the lowest degree of sulfonation and decreased with increasing degree of sulfonation. Tumor regrowth did not occur with aluminum phthalocyanine mono- and disulfonate and with zinc phthalocyanine monosulfonate. With the protocol that was used, complete necrosis without recovery was only observed when reimplantation took place at the end of the 7 day follow-up period. Reimplantation 2 h after treatment always resulted in tumor regrowth. At this interval, the presence of viable tumor cells was confirmed histologically. In general tumor tissue vasculature was more susceptible to photodynamic damage than vasculature of the normal tissue. The effect on the circulation of both tumor and normal tissue increased with decreasing degree of sulfonation. Based on this study, the photodynamic effects using the six sulfonated metallophthalocyanines on the vasculature can be ranked from high to low as: AlPcS₂= ZnPcS₁ > AIPcS₁ > AIPcS₄ > ZnPcS₂ > ZnPcS₄.     

Ionization of aqueous toluic acids: Conductance and thermodynamics

Conductivities of aqueous solutions ofortho-, meta-, andpara-toluic acids have been measured for the concentration range 0.1–2 millimolar and at 5° intervals from 5 to 100°C. At each temperature pK _a(m) andA ₀ have been calculated using the paired ion model recently described by Fuoss. Thermodynamic parameters have been calculated for the ionization of each acid, and Walden products for the anions. Results are discussed in terms of contributions to acidity by enthalpy and entropy changes as well as by hydration of the various solute species.     

Double cyclisation of phenylglycine-o-carboxylic acids—I: New stable mesoionic oxazolones

Remarkably stable mesoionic oxazolones possessing an oxazolo[3,2-a]quinolinium structure (5a–b),8,16, 17) were obtained by the double cyclisation of phenylglycine-o-carboxylic acids (3a–c) in refluxing acetic anhydride or in benzoic anhydride at 140°, The 0-Ac group was eliminated to give the corresponding lactones (6a–b) or replaced by O-Ts (7). IR stretching vibrations of the endo-carbonyl were in the range 1710–1768 cm^?1, while v_1-CH exhibited unusually high values (3159–3194 cm^-1). 1-Acyl derivatives could be obtained only with TFAA (23–24), although easy deuteration of the same position took place in the presence of traces of trifluoroacetic acid. Hydrolysis of 5b led to the α-quinolone-N-acetic acid 27a. In the case of 5a, hydrolysis was accompanied by self-acylation of the nucleophilic site at C-4 with formation of a dimeric acid 28a. The presence of an additional Me group in phenylalanine-o-carboxylic acid (36) activates the corresponding mesoionic oxazolone 37 so that 1-acylation becomes possible with formation of the fused oxazole 38 by the Dakin-West reaction. Temperature dependent magnetic non-equivalence of methylene protons has been observed in acids 3b-d and f and also in the 7-membered anhydride 48b.     

Tacamine,the first example of a new class of indole alkaloids

From the leaves of Tabernaemontana eglandulosa a new alkaloid was isolated, which was assigned structure $\text{1}$ on the basis of speetroscopic evidence.     

Ethylene polymerization over supported MAO/(nBuCp)2ZrCl2 catalysts: Influence of support properties

The catalytic system methylaluminoxane (MAO) and bis(n-butylcyclopentadienyl)zirconium dichloride ((nBuCp)₂ZrCl₂) was immobilized on commercial silica, silica-alumina and aluminophosphate calcined at different temperatures. The properties of the supports were determined by using N₂ adsorption-desorption isotherms at 77 K, FT-IR spectroscopy and SEM. After aluminium and zirconium impregnation, the catalysts were analyzed by ICP-AES, FT-IR and UV-vis spectroscopy. Ethylene polymerizations were carried out in a Schlenk tube at 70 °C and 1.2 bar of ethylene pressure. The polyethylene obtained was characterized by GPC, DSC and SEM.Catalysts supported on silica-alumina exhibited higher polymerization activity than those supported on silica and aluminophosphate. Besides, the activity of MAO/(nBuCp)₂ZrCl₂ catalytic system supported on silica-alumina and aluminophosphate decreased strongly with support calcination temperature, while remained almost constant when silica was employed as support. All these experimental features suggest a role of the support acid properties and hydroxyl group population in the generation of active polymerization species.     

Single electron transfer events and dynamical heterogeneity in the small protein azurin from Pseudomonas aeruginosa

Monitoring the fluorescence of single-dye-labeled azurin molecules, we observed the reaction of azurin with hexacyanoferrate under controlled redox potential yielding data on the timing of individual (forward and backward) electron transfer (ET) events. Change-point analysis of the time traces demonstrates significant fluctuations of ET rates and of mid-point potential E₀. These fluctuations are a signature of dynamical heterogeneity, here observed on a 14 kDa protein, the smallest to date. By correlating changes in forward and backward reaction rates we found that 6% of the observed change events could be explained by a change in midpoint potential, while for 25% a change of the donor–acceptor coupling could explain the data. The remaining 69% are driven by variations in complex association constants or structural changes that cause forward and back ET rates to vary independently. Thus, the observed spread in individual ET rates could be related in a unique way to variations in molecular parameters. The relevance for the understanding of metabolic processes is briefly discussed.

Observing electron transfer events in individual azurin molecules, we relate the spread in transfer rates in a unique way to variations in molecular parameters.     

A study of the mechanism of response of liquid ion exchanger calcium selective electrodes: Part III. Membrane behaviour under non-zero current conditions

The I-E response of the liquid membrane of the calcium selective electrode is studied under constant or linearly varying current and voltage. An increase in the membrane resistance, recorded when an electrical current crosses the membrane, is due to the outflow of Cl^? ions initially present in the membrane. When calcium ions are replaced by alkaline ions inside the membrane at constant current, the decrease of the membrane resistance due to an ion exchange is in agreement with the conductivity measurements (Part II). When the applied voltage is imposed besides the ion exchange one must take into account the interfacial overpotential to explain the important rectification effect observed. The interfacial transfer constant rate of alkaline ions seems greater than that of Ca²⁺ ion.     

A boxmodel development to study the relationships between the photo-oxidants and the particles formation in the troposphere

The model BAGS (Boxmodel for Aerosol and Gasphase Simulations) has been developed. It is composed of two major modules: the first one describes the system of the chemical reactions in the gaseous phase, the second one calculates the aerosol chemical composition and the dimensional distribution of the particles. The boxmodel has been developed with the introduction of new chemical and physical processes, not previously included, in particular the formation of Secondary Organic Aerosol. The other implemented processes are a module for the dynamic of the particle population, nucleation, coagulation and dry deposition. The last phase of the work has been a check of the BAGS capabilities by a series of tests, that have permitted to compare it with other models (MAPS and MADM). The tests in particular have concerned the aerosol water content prediction, the photochemistry, the condensation of the inorganic compounds and the formation of Secondary Organic Aerosol.     

Chip-based capillary electrophoresis with an electrodeless nanospray interface

A sheathless and electrodeless nanospray interface has been used to interface a polycarbonate capillary electrophoresis (CE) chip to a mass spectrometer (MS). The chip was made of two flat polycarbonate plates which were bolted together. Channels were imprinted in one of the plates with metal wires, using a hydraulic press. A short tapered capillary connected to the chip was used as the nanospray emitter. The advantage of this electrodeless interface is that it was not necessary to apply a electrospray voltage to the chip or the nanospray emitter. Instead, the CE voltage already applied to the buffer compartment on the chip, to drive the electrophoresis, was used to generate the spray also. A low conductivity buffer of 1.25 mmol/L ammonium acetate in 80% methanol was used to obtain a large electric field across the buffer channel. The performance of the device was evaluated by analyzing a mixture of three beta-agonists Relative standard deviation (RSD) values obtained were between 4.8 and 5.0%. A sample concentration of 40 nmol/L resulted in a signal-to-noise ratio of 2 to 5 for the different components. Compared to a conventional CE analysis in a fused silica capillary with UV detection, only a minor loss of resolution was observed, which can be attributed to the design of the chip.     

On the preparation of 2-halo alkyl substituted 1,3-dioxolanes and 1,3-dioxanes

Several methods for the preparation of 2-perfluoromethyl-substituted 1,3-dioxolanes and 1,3-dioxanes were tried. The method of Nerdel for the preparation of 1,3-dioxolanes, making use of the condensation between carbonyl compounds and oxiranes, was found to be suitable for perhalogenated ketones and aldehydes, and may even be extended to oxetanes, affording 2-perhaloalkylated 1,3-dioxanes.The yield of the cyclic acetals drops with inreasing substitution.