Adsorption of Ni(II) from model solutions using co-precipitated inorganic oxides

The aim of this work was to obtain an inorganic oxide system containing silica and magnesium oxide, and characterized by specific physicochemical properties, in particular well-defined adsorption parameters. The preparation process was carried out according to a co-precipitation method using solutions of sodium silicate and selected inorganic magnesium salt. The oxide system obtained (MgO·SiO₂) was used as a support (adsorbent) of nickel(II) ions, whose precursors were model solutions of nitrates. The effectiveness of the adsorption process was evaluated using many different analytical techniques, including atomic absorption spectroscopy, energy dispersive X-ray spectroscopy and equivalent point titration. Moreover the stability of adsorbent/adsorbate bonding was estimated. The oxide systems—adsorbents—used in the process were also analyzed according to their physicochemical properties, especially changes in adsorption parameters. The last part of the study involved evaluation of the kinetics of the adsorption process depending on time and the pH of the reaction system.     

Can η mesons have a magnetic moment?

The response of pseudoscalar and vector mesons to strong magnetic fields is studied within a simple constituent quark model using analogy with bound states of Positronium. Magnetic moments of charged vector mesons K*, D*, B* are predicted and it is found that η mesons have magnetic polarizability. In extremely strong magnetic fields, behaviour of J/Ψ mesons is discussed. We speculate on the existence of an induced magnetic moment of η meson.     

Applicability of medium-size basis sets in calculations of molecular dynamic polarisabilities

Static and dynamic average polarisabilities and polarisability anisotropies of seven linear non-polar and polar molecules are calculated within the CCS, CC2, and CC3 approximations using a range of medium-sized basis sets: the polarised LPol-n (n = ds, dl, fs, fl), the aug-pc-n (n = 1, 2), the def2-SVPD, and -TZVPD basis sets. Reference values are obtained using a hierarchy of Dunning's (d-)aug-cc-pVXZ (X = D, T, Q, 5) basis sets. The results are discussed together with the available CCSD values in terms of basis set and correlation method errors, and their ratio. Detailed analysis shows that already the def2-SVPD basis set can be used in CCS polarisability calculations. When affordable, the slightly larger aug-pc-1 basis set is recommended, as it leads to significant reduction of basis set error. The def2-TZVPD, LPol-ds, and aug-pc-2 basis sets are optimal choice within the CC2 approximation, with the latter allowing to approach the CC2 basis set limit. The LPol-ds, -dl, and def2-TZVPD sets outperform the aug-cc-pVTZ set in average polarisability CCSD calculations, with the def2-TZVPD being competitive to other reduced-size sets also in determination of polarisability anisotropy. The aug-pc-2 basis is a particularly attractive choice for CCSD, giving the accuracy of aug-cc-pVQZ at a significantly reduced computational cost. The polarisability anisotropy is shown to be more computationally demanding than the average polarisability, in particular with respect to the accuracy of the correlation method and an accurate evaluation of this property requires at least the CCSD model.     

HPLC Method for Chiral Separation and Quantification of Antidepressant Citalopram and Its Precursor Citadiol

HPLC method enabling chiral separation and determination of citalopram (CIT), a widely used antidepressant, and its synthetic precursor citadiol in one analysis was developed and validated. Moreover, supercritical fluid chromatography was also tested and was proved to be less effective for this separation purpose. The optimized HPLC system was composed of Chiralcel OD-H column and n-hexane/propane-2-ol/triethylamine 96/4/0.1 (v/v/v) as mobile phase, column temperature 25 °C, flow rate 1.0 mL min^?1, UV detection at 250 nm. The effects of amount of propane-2-ol, triethylamine addition, and temperature on enantioselectivity and resolution of the enantiomers were evaluated. The method was found to be suitable for determination of the enantiomeric purity of CIT in bulk drugs. Enantiomers of CIT were determined in two commercially available pharmaceuticals.     

Role of reaction atmosphere in preparation of potassium tantalate through sol–gel method

Potassium tantalate (KT) thin films and powders of both K₂Ta₂O₆ (KT pyrochlore) and KTaO₃ (KT perovskite) structures were prepared by means of chemical solution deposition method using Si(111) with ZnO and MgO buffer layers as a substrate. The influence of reaction atmosphere on reaction pathway and phase composition for both KT powders, and KT thin films has been studied mainly by means of powder diffraction and infrared spectroscopy. When an oxygen flow instead of static air atmosphere has been used the process of pyrolysis in oxygen runs over much narrower temperature interval (200–300 °C), relatively to air atmosphere (200–600 °C) and almost no (in case of powders), or no (in case of thin films) pyrochlore intermediate phase has been detected in comparison with treatment in air, where the pyrochlore phase is stable at temperatures 500–600 °C (powders). KT perovskite phase starts to crystallize at temperatures 50° and 150 °C lower compared to air atmosphere in case of powders and thin films, respectively. Microstructure formed by near-columnar grains and small grains of equiaxed shape was observed in films treated in oxygen and air atmosphere, respectively.     

Unusual Inherent Electrochemistry of Graphene Oxides Prepared Using Permanganate Oxidants

Graphene and graphene oxides are materials of significant interest in electrochemical devices such as supercapacitors, batteries, fuel cells, and sensors. Graphene oxides and reduced graphenes are typically prepared by oxidizing graphite in strong mineral acid mixtures with chlorate (Staudenmaier, Hofmann) or permanganate (Hummers, Tour) oxidants. Herein, we reveal that graphene oxides pose inherent electrochemistry, that is, they can be oxidized or reduced at relatively mild potentials (within the range ±1 V) that are lower than typical battery potentials. This inherent electrochemistry of graphene differs dramatically from that of the used oxidants. Graphene oxides prepared using chlorate exhibit chemically irreversible reductions, whereas graphene oxides prepared through permanganate‐based methods exhibit very unusual inherent chemically reversible electrochemistry of oxygen‐containing groups. Insight into the electrochemical behaviour was obtained through cyclic voltammetry, chronoamperometry, and X‐ray photoelectron spectroscopy experiments. Our findings are of extreme importance for the electrochemistry community as they reveal that electrode materials undergo cyclic changes in charge/discharge cycles, which has strong implications for energy‐storage and sensing devices.     

Size‐Selective Encapsulation of Hydrophobic Guests by Self‐Assembled M4L6 Cobalt and Nickel Cages

Subtle differences in metal–ligand bond lengths between a series of [M₄L₆]^4? tetrahedral cages, where M=Fe^II, Co^II, or Ni^II, were observed to result in substantial differences in affinity for hydrophobic guests in water. Changing the metal ion from iron(II) to cobalt(II) or nickel(II) increases the size of the interior cavity of the cage and allows encapsulation of larger guest molecules. NMR spectroscopy was used to study the recognition properties of the iron(II) and cobalt(II) cages towards small hydrophobic guests in water, and single‐crystal X‐ray diffraction was used to study the solid‐state complexes of the iron(II) and nickel(II) cages.