Cathodic and anodic pre-treated boron doped diamond with different sp content: Morphological,structural, and impedance spectroscopy characterizations

In this work, the influence of cathodic (Red) and anodic (Ox) pre-treatment on boron doped diamond (BDD) films grown with different sp²/sp³ ratios was systematically studied. The sp²/sp³ ratios were controlled by the addition of CH₄ of 1,3,5 and 7 sccm in the gas inlet during the growth process. The electrodes were treated in 0.5 mol L⁻¹ H₂SO₄ at −3 and 3 V vs Ag/AgCl, respectively, for 30 min. The electrochemical response of BDD films was investigated using electrochemical impedance spectroscopy (EIS) and Mott–Schottky Plot (MSP) measurements. Four film sample sets were produced in a hot filament chemical vapor deposition reactor. During the growth process, an additional H₂ line passing through a bubbler containing the B₂O₃ dissolved in methanol was used to carry the boron. The scanning electron microscopy morphology showed well faced films with a small decrease in their grain size as the CH₄ concentration increased. The Raman spectra depicted a pronounced sp² band, mainly for films with 5 and 7 sccm of CH₄. MSP showed a decrease in the acceptor concentration as the CH₄ increased indicating the CH₄ influence on the doping process for Red–BDD and Ox–BDD samples. Nonetheless, an apparent increase in the acceptor concentrations for both Ox–BDD samples was observed compared to that for Red–BDD samples, mainly attributed to the surface conductive layer (SCL) formation after this strong oxidation process. The EIS Nyquist plots for Red–BDD showed a capacitance increase for the films with higher sp² content (5 and 7 sccm). On the other hand, the Nyquist plots for Ox–BDD can be described as semicircles near the origin, at high frequencies, where their charge transfer resistance strongly varied with the sp² increase in such films.     

Physical chromosome mapping of repetitive DNA sequences in Nile tilapia Oreochromis niloticus: evidences for a differential distribution of repetitive elements in the sex chromosomes

Repetitive DNAs have been extensively applied as physical chromosome markers on comparative studies, identification of chromosome rearrangements and sex chromosomes, chromosome evolution analysis, and applied genetics. Here we report the characterization of repetitive DNA sequences from the Nile tilapia (Oreochromis niloticus) genome by construction and screening of plasmid library enriched with repetitive DNAs, analysis of a BAC-based physical map, and hybridization to chromosomes. The physical mapping of BACs enriched with repetitive sequences and C(o)t-1 DNA (DNA enriched for highly and moderately repetitive DNA sequences) to chromosomes using FISH showed a predominant distribution of repetitive elements in the centromeric and telomeric regions and along the entire length of the largest chromosome pair (X and Y sex chromosomes) of the species. The distribution of repetitive DNAs differed significantly between the p arm of X and Y chromosomes. These findings suggest that repetitive DNAs have had an important role in the differentiation of sex chromosomes.     

Tunable L-band erbium-doped fibre ring laser by means of induced cavity loss using a fibre taper

In this paper, we present a continuous-wave tunable fibre ring laser operating in the L-band. A bi-directional pumped L-band erbium-doped fibre amplifier provides gain to the loop. Tunability is achieved by bending a single-mode fibre taper using a micrometer drive, controlling in this way the spectral cavity losses. Laser emission is achieved between 1587 and 1606 nm, and low variation of the output laser power is observed over all the tuning range. PACS 42.55.Wd; 42.60.Da     

Coherence transition in granular YBa2Cu3O7-δ, YBa2Cu2.95Zn0.05O7-δ, and YBa1.75Sr0.25Cu3O7-δ superconductors

We have studied experimentally the electrical magneto-conductivity near the superconducting transition of YBa₂Cu₃O_7-δ, YBa₂ (Cu_2.95Zn_0.05)O_7-δ and Y(Ba_1.75Sr_0.25)Cu₃O_7-δ polycrystalline samples. The measurements were performed in magnetic fields ranging from 0 to 400 Oe applied parallel to the current orientation. The results show that the resistive transition of these systems proceeds in two stages. The pairing transition occurs at the bulk critical temperature T_c, where superconductivity is stabilized within small and homogeneous regions of the sample generically called grains. The regime of approach to the zero resistance state reveals the occurrence of a coherence transition at a lower temperature T_c0. This transition is related to the connective nature of the granular samples and is controlled by fluctuations of the order-parameter phase of individual grains. Our experiments show that the Zn-doping, besides depressing the pairing critical temperature, strongly enlarges the temperature range dominated by effects related to the coherence transition. The substitution of Ba by Sr causes only a small reduction of T_c, but also enhances significantly the effects related to the grain coupling phenomenology. In general, our results indicate that these impurity substitutions in YBa₂Cu₃O_7-δ produce or magnify the granularity at a microscopic level, enhancing the effects of phase fluctuations in the conductivity near the transition.     

Entangled Bell states of two electrons in coupled quantum dots—phonon decoherence

We demonstrate coupling and entangling of quantum states in a pair of vertically aligned self assembled quantum dots by studying the dynamics of two interacting electrons driven by external electric field. The present entanglement involves the spatial degree of freedom for the two electrons system. We show that system of two interacting electrons initially delocalized (localized each in one dot) oscillate slowly in response to electric field, since the strong Coulomb repulsion makes them behaving so. We use an explicit formula for the entanglement of formation of two qubit in terms of the concurrence of the density operator. In ideal situations, entangled quantum states would not decohere during processing and transmission of quantum information. However, real quantum systems will inevitably be influenced by surrounding environments. We discuss the degree of entanglement of this system in which we introduce the decoherence effect caused by the acoustic phonon. In this entangled states proposal, the decohering time depends on the external parameters.     

Structural complexity of disordered surfaces: Analyzing the porous silicon SFM patterns

This paper introduces a relative structural complexity measure for the characterization of disordered surfaces. Numerical solutions of 2d+1 KPZ equation and scanning force microscopy (SFM) patterns of porous silicon samples are analyzed using this methodology. The results and phenomenological interpretation indicate that the proposed measure is efficient for quantitatively characterize the structural complexity of disordered surfaces (and interfaces) observed and/or simulated in nano, micro and ordinary scales.     

Electronics with and on paper

Today there is a strong interest in the scientific and industrial community concerning the use of biopolymers for electronic applications, driven mainly by low‐cost and disposable applications. Adding to this interest, we must recognise the importance of the dream of wireless auto‐sustained and low‐energy‐consumption electronics. This dream can be fulfilled by cellulose paper, the lightest and the cheapest known substrate material, as well as the Earth's major biopolymer and of tremendous global economic importance. Most of the paper used up to now is optimised in terms of the required mechanical and physical properties to be used as the support of inks of different origins. In the future, specific electronic heterogeneous paper sheets should be fabricated aiming to get paper fibers with required bulk and surface functionalities, proper water/vapour barrier, size and diameter/thickness of the fibrils and full paper thickness. This will be the function of components/devices to be incorporated/integrated such as thin‐film transistors, complementary metal oxide semiconductor devices, passive electronic components (resistances, inductors and capacitors), memory transistors, electrochromics and thin‐film paper batteries. (© 2011 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Optical properties of in situ doped and undoped titania nanocatalysts and doped titania sol-gel nanofilms

In this paper we present spectroscopic properties of doped and undoped titanium dioxide (TiO₂) as nanofilms prepared by the sol-gel process with rhodamine 6G doping and studied by photoacoustic absorption, excitation and emission spectroscopy. The absorption spectra of TiO₂ thin films doped with rhodamine 6G at very low concentration during their preparation show two absorption bands, one at 2.3 eV attributed to molecular dimmer formation, which is responsible for the fluorescence quenching of the sample and the other at 3.0 eV attributed to TiO₂ absorption, which subsequently yields a strong emission band at 600 nm. The electronic band structure and optical properties of the rutile phase of TiO₂ are calculated employing a fully relativistic, full-potential, linearized, augmented plane-wave (FPLAPW) method within the local density approximation (LDA). Comparison of this calculation with experimental data for TiO₂ films prepared for undoped sol-gels and by sputtering is performed.