Tandem Benzylic Oxidation/Dihydroxylation of α‐Vinyl‐ and α‐Alkenylbenzyl Alcohols

A de novo tandem benzylic oxidative dihydroxylation of α‐vinyl‐ and α‐alkenylbenzyl alcohols has been developed to give α,β‐dihydroxypropiophenones (=2,3‐dihydroxy‐1‐phenylpropan‐1‐ones) and α,β‐dihydroxyalkyl phenones. This method was shown to be substrate‐selective and specific for the oxidation of benzylic alcohols.     

离子色谱法测定蓝藻培养液中有机酸和无机阴离子

建立了一种利用阴离子交换色谱柱分离,电导检测器同时测定17种有机酸和7种阴离子的方法。采用Ionpac AS11-HC阴离子交换柱,KOH溶液作为淋洗液,梯度洗脱,流量为1.0mL/min,柱温为30℃,进样体积为25μL。24种分析物测定结果的相对标准偏差在0.31%~2.67%之间,线性相关系数均大于0.996,平均加标回收率在80.3%~108.5%之间。该方法可用于微生物培养液中有机酸和阴离子的同时测定。     

Coherent structures in unsteady swirling jet flow

An LDA technique and phase-averaging analysis were used to study unsteady precessing flow in a model vortex burner. Detailed measurements were made for Re=15,000 and S=1.01. On the basis of the analysis of phase-averaged data and vortex detection by the λ₂-technique of Joeng and Hussain (1995), three precessing spiral vortex structures were identified: primary vortex (PV), inner secondary vortex (ISV), and outer secondary vortex (OSV). The PV is the primary and most powerful structure as it includes primary vorticity generated by the swirler; the ISV and OSV are considered here as secondary vortical structures. The jet breakdown zone is the conjunction of a pair of co-rotating co-winding spiral vortices, PV and ISV. The interesting new feature described is that the secondary vortices form a three-dimensional vortex dipole with a helical geometry. The effect of coupling of secondary vortices was suggested as a mechanism of enhanced stability reflected in their increased axial extent.     

Early Membrane Responses to Magnetic Particles are Predictors of Particle Uptake in Neural Stem Cells

Magnetic particles (MPs) offer several advantages for neural cell therapy, but limited particle uptake by neural cells is a barrier to translation. It is recently proved that tailoring particle physicochemical properties (by enhancing their iron content) dramatically improves uptake in neural stem cells (NSCs)—a major transplant population. High‐throughput screening of particles with varying physicochemical properties can therefore aid in identifying particles with optimal uptake features, but research is hampered by the lack of simple methodologies for studying neural cell membrane responses to nanoparticle platforms. A high‐resolution–high throughput method has been used to study early membrane responses of primary rodent NSCs to particles of variant magnetite loading, to attempt to correlate these responses with known particle internalization profiles. Membrane imaging is enhanced through sequential staining with osmium (O) and thiocarbohydrazide (T), a method termed OTOTO, combined with field‐emission scanning electron microscopy (FESEM). A five‐point classification system was used to systematically evaluate early MP‐induced membrane responses to particles possessing distinct physicochemical properties. Significantly different profiles of membrane activation were noted that correlate with particle uptake profiles. It is suggested that our method can serve as a valuable predictor of particle internalization in neural cells for diverse particle platforms.     

Cellulose-based liquid crystalline photoresponsive films with tunable surface wettability

We report on a new type of liquid crystalline cellulosic films with light controllable reversible wettability. The films are prepared from a thermotropic cellulose derivative functionalized with azo-containing groups. These groups exhibit dynamic changes in interfacial properties in response to UV irradiation. The UV irradiation induces trans-to-cis isomerization in the azobenzene moiety, which causes a conformational change in the upper molecular layers of the thin films. These changes originate a hydrophobic to comparatively hydrophilic transformation of the surface. The reversible wettability of the surface results from the cis/trans photo and thermal isomerization. The UV-vis absorption spectra, as well as contact angle measurements with UV irradiation, clearly support the understanding of the phenomenon. This type of surface design enables the amplification of molecular level conformational transitions to macroscopic changes in interface properties using the means of isomerism. This opens new opportunities in surface engineering using eco-friendly cellulose manipulation.     

Correlation between the structure and wettability of photoswitchable hydrophilic azobenzene monolayers on silicon

Photoresponsive monolayers of hydrophilically substituted azobenzenes have been prepared by reaction on aminosilane monolayers on silicon surfaces. Grafting densities in the 0.2-1.0 molecule/nm(2) range were determined by X-ray reflectometry. The monolayers exhibit reversible photoisomerization, switching from a more hydrophilic trans state to a less hydrophilic cis state upon UV irradiation, in contrast with the usual behavior of most azobenzene monolayers that switch from a less to a more hydrophilic state. This indicates that the wettability is not dominated by the change in the dipole moment of the azobenzene moiety but originates from variations in the composition of the outer surface of the monolayers resulting from the reorientation of the substituent groups. The light-driven change in the water contact angle correlates linearly with the grafting density but remains small. However, the wettability contrast can be increased by forcing the molecules to stand in an improved vertical orientation, either by densifying the underlying aminosilane monolayer or by filling the voids left at the bottom of the layer of grafted azobenzene molecules.     

Sol–gel silica hybrid biomaterials for application in biodegradation of toxic compounds

The purpose of the present work is the sol–gel synthesis, structure characterization and potential application of hybrid biomaterials based on silica precursor (MTES) and natural polymers such as gelatin or pectin. The structure formation in the biomaterials was investigated by XRD, FTIR, BET and AFM. The results showed that all studied hybrid biomaterials have an amorphous structure. The FT-IR spectra of the obtained materials with MTES showed chemical bonds at 2,975, 1,255, 880 and 690 cm⁻¹ due to the presence of Si–O–R (CH₃ and C₂H₅) and Si–C bonds. In the samples synthesized with TEOS the inorganic and organic components interact by hydrogen bonding, Van der Waals or electrostatic forces. Surface area of investigated samples decreases with increasing of the natural polymers content. The structure evolution was studied by AFM and roughness analysis. Depending on the chemical composition a different design and size of particles and their aggregates on the surface structure were established. The hybrid biomaterials were used for immobilization of bacterial cells and applied in the biodegradation of the toxic compound 4-chlorobutyronitrile, possible constituent of waste water effluents in a laboratory glass bioreactor. Optimization of the process at different temperatures was carried out.     

A modification of the successive projections algorithm for spectral variable selection in the presence of unknown interferents

This work proposes a modification to the successive projections algorithm (SPA) aimed at selecting spectral variables for multiple linear regression (MLR) in the presence of unknown interferents not included in the calibration data set. The modified algorithm favours the selection of variables in which the effect of the interferent is less pronounced. The proposed procedure can be regarded as an adaptive modelling technique, because the spectral features of the samples to be analyzed are considered in the variable selection process. The advantages of this new approach are demonstrated in two analytical problems, namely (1) ultraviolet–visible spectrometric determination of tartrazine, allure red and sunset yellow in aqueous solutions under the interference of erythrosine, and (2) near-infrared spectrometric determination of ethanol in gasoline under the interference of toluene. In these case studies, the performance of conventional MLR-SPA models is substantially degraded by the presence of the interferent. This problem is circumvented by applying the proposed Adaptive MLR-SPA approach, which results in prediction errors smaller than those obtained by three other multivariate calibration techniques, namely stepwise regression, full-spectrum partial-least-squares (PLS) and PLS with variables selected by a genetic algorithm. An inspection of the variable selection results reveals that the Adaptive approach successfully avoids spectral regions in which the interference is more intense.     

Direct monitoring of drug degradation by easy ambient sonic-spray ionization mass spectrometry: the case of enalapril

Using enalapril maleate as a test case, the ability of ambient mass spectrometry, namely, via easy ambient sonic‐spray ionization mass spectrometry (EASI‐MS), to perform direct monitoring of drug degradation has been tested. Two manufacturing processes were investigated (direct compression and wet granulation), and the formation of degradation products was measured via both EASI‐MS and high‐performance liquid chromatography with ultraviolet detection for a total period of 18 months. Both techniques provide comparable results, which indicate that direct analysis by ambient mass spectrometric techniques presents a viable alternative for drug degradation monitoring with superior simplicity, throughput, and reliability (no sample manipulation), and comparable quantitative results. In terms of qualitative monitoring, the full mass spectra with intact species provided by EASI‐MS allow for comprehensive monitoring of known and unknown (or unexpected) degradation products. Copyright © 2011 John Wiley & Sons, Ltd.