Kinetic study of copper(I)‐catalyzed click chemistry step‐growth polymerization

Oligomers and polymers containing triazole units were synthesized by the copper(I)‐catalyzed 1,3‐dipolar cycloaddition step‐growth polymerization of four difunctional azides and alkynes. In a first part, monofunctional benzyl azide was used as a chain terminator for the polyaddition of 1,6‐diazidohexane and α,ω‐bis(O‐propargyl)diethylene glycol, leading to polytriazole oligomers of controlled average degree of polymerization (DP_n = 3–20), to perform kinetic studies on low‐viscosity compounds. The monitoring of the step‐growth click polymerization by ¹H NMR at 25, 45, and 60 °C allowed the determination of the activation energy of this click chemistry promoted polyaddition process, that is, E_a = 45 ± 5 kJ/mol. The influence of the catalyst content (0.1–5 mol % of Cu(PPh₃)₃Br according to azide or alkyne functionalities) was also examined for polymerization kinetics performed at 60 °C. In a second part, four high molar mass polytriazoles were synthesized from stoichiometric combinations of diazide and dialkyne monomers above with p‐xylylene diazide and α,ω‐bis(O‐propargyl)bisphenol A. The resulting polymers were characterized by DSC, TGA, SEC, and ¹H NMR. Solubility and thermal properties of the resulting polytriazoles were discussed based on the monomers chemical structure and thermal analyses. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 5506–5517, 2008     

Formation of third generation poly(pyrazolyl)borate ligands from alkyne coupling reactions of Fe[(p-IC6H4)B(3-Rpz)3]2 (R = H, Me; pz = pyrazolyl): pathways toward controlling an iron(II) electronic spin-state crossover

Sonogashira coupling reactions of terminal alkynes with Fe[(p-IC6H4)B(3-Mepz)3]2 (pz = pyrazolyl ring) yield Fe[(p-PhC2C6H4)B(3-Mepz)3]2 (2), Fe[(p-Me3SiC2C6H4)B(3-Rpz)3]2 (R = H, 3a, R = Me, 3b), and Fe[(p-HC2C6H4)B(3-Mepz)3]2 (R = H, 4a, R = Me, 4b), a series of new complexes containing "third generation" poly(pyrazolyl)borate ligands. Complex 2 undergoes a fairly gradual iron(II) electronic spin-state crossover with a 30 K hysteresis, whereas complex 3b is an unusual example of a complex with equivalent iron(II) sites in the high-spin form that shows an abrupt 50% spin crossover. For complex 4b, 50% of the iron(II) sites undergo a gradual spin-state transition between 185 and 350 K with an activation energy of 1590 +/- 30 cm(-1) and a T(1/2) = 280 K and, for the remaining iron(II) sites, an abrupt cooperative spin-state crossover between 106 and 114 K. The crystal structures of 4b obtained for each of the three distinct electronic spin states reveal two crystallographically different iron(II) sites, and analysis of the molecular/supramolecular structures indicates that the difference in the degree of pyrazolyl ring tilting in the ligands between the two sites, rather than the strength of the intermolecular forces, play a prominent role in determining the temperature of the spin-state crossover.     

Building blocks for the molecular expression of quantum cellular automata. Isolation and characterization of a covalently bonded square array of two ferrocenium and two ferrocene complexes

The suitability of [{(eta5-C5H5)Fe(eta5-C5H4)}4(eta4-C4)Co(eta5-C5H5)][PF6]2, [1][PF6]2, for use as a molecular quantum cellular automata (QCA) cell is demonstrated. To this end the structure of 1 in the solid state and the conversion of 1 to mono- and dicationic mixed-valence complexes have been accomplished. The latter compounds have been isolated as pure materials and characterized by IR, EPR, and M?ssbauer spectroscopies and single-crystal XRD (monocation only) and magnetic susceptibility measurements. Near-IR spectra demonstrate the mixed valence character of the cations (valence trapped on the IR, EPR and M?ssbauer time scales), and the energies of the intervalence charge-transfer bands provide a measure of the hole hopping frequency.     

Catalyzed chain growth of polyethylene on magnesium for the synthesis of macroalkoxyamines: Application to the production of block copolymers using controlled radical polymerization

A synthetic method for the production of polyethylene (PE) chains carrying alkoxyamine end‐group has been proposed first by successfully reacting the well‐known 2,2,6,6‐tetramethylpiperidine‐N‐oxyl (TEMPO) and N‐(2‐methyl‐2‐propyl)‐N‐(1‐diethylphosphono‐2,2‐dimethylpropyl)‐N‐oxyl (commonly called SG1) stable radicals with dipolyethylenylmagnesium compounds to give PE‐TEMPO and PE‐SG1. Since the homolytic cleavage of these two macroalkoxyamines for the production of block copolymers using controlled radical polymerization would require temperatures higher than 160 °C, two original new nitroxides (4‐[(2,2‐dimethyl‐4‐(N‐tert‐Butyl‐N‐(1‐diethoxyphosphoryl‐2,2‐dimethylpropyl)aminoxy)‐4‐n‐butoxycarbonyl)butanoyloxyl]‐2,2,6,6‐tetramethylpiperidinyl‐1‐oxy, DD1) and 4‐[(2,2‐dimethyl‐4‐(N‐tert‐Butyl‐N‐(1‐diethoxyphosphoryl‐2,2‐dimethylpropyl)aminoxy)‐4‐phenyl) butanoyloxyl]‐2,2,6,6‐tetramethylpiperidinyl‐1‐oxy, DD2) containing a TEMPO moiety and incorporating an SG1‐based alkoxyamine (cleavage temperature: 60 °C) were then synthesized. NMR analyses showed that the resulting PE‐DD1 and PE‐DD2 were obtained using this functionalization strategy though with low to moderate yields (from 17% to 40%). PE‐DD2 (40% functionalization) was used under controlled radical polymerization conditions of n‐butyl acrylate. SEC analyses together with ¹H NMR analysis showed that a poly(ethylene‐b‐n‐butyl acrylate) block copolymer was produced and that the polymerization proceeded under control. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 2705–2718, 2007     

Oxorhenium(V) complexes with the non-sulfur-containing amino acid histidine

Equivalent amounts of ReOX(3)(OPPh(3))(Me(2)S) (where X = Cl, Br) and L-histidine (L-hisH) in acetonitrile yield ReOX(2)(L-his), in which the amino acid monoanion is N,N,O-tridentate. X-ray diffraction work on both compounds shows that the three donors occupy a face in a distorted octahedron and the carboxylate oxygen is coordinated trans to the Re=O bond. The 2:1 complex [ReO(L-his)(2)]I is obtained by reacting 2 equiv of L-histidine with ReO(2)I(PPh(3))(2) in methanol in the presence of NaOCH(3). (1)H NMR spectroscopy indicates that these complexes contain one N,N,O-tridentate histidine anion coordinated as above and one N,N-bidentate histidine anion, whose carboxylate group is free. By refluxing ReOX(2)(L-his) in methanol, the carboxylic groups esterify and two octahedral units condense into an oxo-bridged dinuclear complex [ReOX(2)(L-hisMe)](2)O containing N,N-bidentate histidine methyl ester. The O=Re-O-Re=O backbone is approximately linear, and the two ReOX(2)(L-hisMe) units are related by a 2-fold axis through the central oxygen. Crystals of [ReOBr(2)(L-hisMe)](2)O consist of an ordered phase containing two of the possible diastereoisomers in a 1:1 ratio. (1)H NMR spectra of these crystals include two sets of signals, consistent with the presence of two isomers with C(2) symmetry, and the spectra of the nonrecrystallized material confirm that these are the only two isomers formed.     

A high-pressure iron K-edge x-ray absorption spectral study of the spin-state crossover in (Fe[HC(3,5-(CH(3))(2)pz)(3)](2))I(2) and (Fe[HC(3,5-(CH(3))(2)pz)(3)](2))(BF(4))(2)

The room temperature iron K-edge X-ray absorption near edge structure spectra of (Fe[HC(3,5-(CH(3))(2)pz)(3)](2))I(2) and (Fe[HC(3,5-(CH(3))(2)pz)(3)](2))(BF(4))(2) have been measured between ambient and 88 and 94 kbar, respectively, in an opposed diamond anvil cell. The iron(II) in (Fe[HC(3,5-(CH(3))(2)pz)(3)](2))I(2)undergoes the expected gradual spin-state crossover from the high-spin state to the low-spin state with increasing pressure. In contrast, the iron(II) in (Fe[HC(3,5-(CH(3))(2)pz)(3)](2))(BF(4))(2) remains high-spin between ambient and 78 kbar and is only transformed to the low-spin state at an applied pressure of between 78 and 94 kbar. No visible change is observed in the preedge peak in the spectra of (Fe[HC(3,5-(CH(3))(2)pz)(3)](2))I(2) with increasing pressure, whereas the preedge peak in the spectra of ((e[HC(3,5-(CH(3))(2)pz)(3)](2))(BF(4))(2) changes as expected for a high-spin to low-spin crossover with increasing pressure. The difference in the spin-state crossover behavior of these two complexes is likely related to the unusual behavior of (Fe[HC(3,5-(CH(3))(2)pz)(3)](2))(BF(4))(2) upon cooling.     

Polymorphism in Fe[(p-IC6H4)B(3-Mepz)3]2 (pz = pyrazolyl): impact of supramolecular structure on an iron(II) electronic spin-state crossover

The new ligands Na[(p-IC6H4)B(3-Rpz)3] (R = H, Me) have been prepared by converting I2C6H4 to IC6H4SiMe3 with Li(t)Bu and SiMe3Cl, and then to IC6H4BBr2 with BBr3 and subsequent reaction with 3 equiv of (un)substituted pyrazole and 1 equiv of NaO(t)Bu. These new ligands react with FeBr2 to give either purple, low-spin Fe[(p-IC6H4)B(pz)3]2 or colorless, high-spin Fe[(p-IC6H4)B(3-Mepz)3]2. Depending upon the crystallization conditions, Fe[(p-IC6H4)B(3-Mepz)3]2 can exist both as two polymorphs and as a methylene chloride solvate. An examination of these polymorphs by variable-temperature X-ray crystallography, magnetic susceptibility, and Mossbauer spectroscopy has revealed different electronic spin-state crossover properties for each polymorph and yields insight into the influence of crystal packing, independent of other electronic perturbations, on the spin-state crossover. The first polymorph of Fe[(p-IC6H4)B(3-Mepz)3]2 has a highly organized three-dimensional supramolecular structure and does not undergo a spin-state crossover upon cooling to 4 K. The second polymorph of Fe[(p-IC6H4)B(3-Mepz)3]2 has a stacked two-dimensional supramolecular structure, a structure that is clearly less well organized than that of the first polymorph, and undergoes an abrupt iron(II) spin-state crossover from high spin to low spin upon cooling below ca. 130 K. The crystal structure of the methylene chloride solvate of Fe[(p-IC6H4)B(3-Mepz)3]2 has a similar stacked two-dimensional supramolecular structure, but the crystals readily lose the solvate. The resulting desolvate undergoes a gradual spin-state crossover to the low-spin state upon cooling below ca. 235 K. It is clear from a comparison of the structures that the long-range solid-state organization of the molecules, which is controlled by noncovalent supramolecular interactions, has a strong impact upon the spin-state crossover, with the more highly organized structures having lower spin-crossover temperatures and more abrupt spin-crossover behavior.     

trans‐Bis(3‐acetyl­pyridine‐κN)diiodoplatinum(II)

In the square‐planar title complex, [PtI₂(C₇H₇NO)₂], the Pt atom lies on a crystallographic inversion center, coinciding with an anti arrangement of the 3‐acetyl­pyridine ligands. The dihedral angles between the pyridine rings and the Pt coordination plane are 67.5 (2)°, while those between the pyridine rings and the acetyl planes are 20.8 (5)°. The ¹⁹⁵Pt NMR resonance of the title complex (CD₂Cl₂) was observed at −3224 p.p.m. The major structural parameters are compared with those from previously reported related structures.     

High-resolution heteronuclear correlation spectra between 31P and 27Al in microporous aluminophosphates

A solid-state nuclear magnetic resonance (NMR) experiment, which provides high-resolution two-dimensional heteronuclear correlation (HETCOR) spectra between 27Al and 31P, is described. The first part of the experiment uses triple-quantum or quintuple-quantum magic-angle spinning (MQMAS) NMR of spin-5/2 nuclei (27Al) to produce an isotropic echo that is unaffected by the second-order quadrupolar broadening. The magnetization is then transferred to the spin-1/2 (31P) nuclei via cross-polarization (CP), resulting in isotropic resolution in both spectral dimensions. To illustrate its usefulness, this method (referred to as MQHETCOR) is applied to two important microporous framework aluminophosphates, hydrated VPI-5 and AIPO4-40.     

New Functional Polyolefins: Towards a Bridge Between Catalytic and RAFT Polymerizations?

Summary: Di‐polyethylenyl magnesium compounds, obtained by a transition metal catalyzed chain growth reaction on butyloctyl magnesium, are reacted with a range of disulfides of thiocarbonylated compounds (RC(S)SSC(S)R). Xanthate, dithiocarbamate, dithioester, and trithiocarbonate‐functionalized polyethylenes are thus obtained and characterized by ¹H NMR and IR spectroscopy, and MALDI TOF mass spectrometry. These macroRAFT agents may serve as building blocks for the synthesis of block copolymers based on polyolefins and polar segments.

Thio thiocarbonylate‐terminated polyethylene chains are easily prepared in high yield by a two step reaction and analyzed by MALDI‐TOF mass spectrometry.