Determination of pesticides in milk-based infant formulas by pressurized liquid extraction followed by gas chromatography tandem mass spectrometry

An efficient and selective automated analytical method for the determination and quantification of a selected group of 12 organochlorine and organophosphorous pesticides in milk-based infant formulas has been developed. The samples were extracted by pressurized liquid extraction (PLE) and analysed using GC-MS/MS. The use of alumina as the fat retainer in the PLE extraction cell, together with the application of an injector temperature program during the GC injection process, avoided typical matrix interferences without the application of additional cleanup steps. Mean recoveries of between 70 and 110% were achieved for most of the compounds, except for chlorpyrifos methyl (50%), vinclozoline (48%), fenitrothion (56%) and procymidone (53%), with relative standard deviations ranging from 9 to 17%. Low limits of quantification were obtained for the studied compounds, from 0.01 to 2.6 μg kg⁻¹, thus guaranteeing their accurate determination within the rigorous requirements established for baby food. The validated method was applied to a pilot monitoring study in Spain. Twenty five samples of different brands of powdered infant formulas were obtained from supermarkets. Positive findings of endosulfan I, endosulfan II, fenitrothion, chlorpyrifos ethyl and bifenthrin were detected at concentrations ranging from 0.03 to 5.03 μg kg⁻¹.     

pH‐Responsive Pharmacological Chaperones for Rescuing Mutant Glycosidases

A general approach is reported for the design of small‐molecule competitive inhibitors of lysosomal glycosidases programmed to 1) promote correct folding of mutant enzymes at the endoplasmic reticulum, 2) facilitate trafficking, and 3) undergo dissociation and self‐inactivation at the lysosome. The strategy is based on the incorporation of an orthoester segment into iminosugar conjugates to switch the nature of the aglycone moiety from hydrophobic to hydrophilic in the pH 7 to pH 5 window, which has a dramatic effect on the enzyme binding affinity. As a proof of concept, new highly pH‐responsive glycomimetics targeting human glucocerebrosidase or α‐galactosidase with strong potential as pharmacological chaperones for Gaucher or Fabry disease, respectively, were developed.     

Graphenes as Efficient Metal‐Free Fenton Catalysts

Reduced graphene oxide exhibits high activity as Fenton catalyst with HO^. radical generation efficiency over 82 % and turnover numbers of 4540 and 15023 for phenol degradation and H₂O₂ consumption, respectively. These values compare favorably with those achieved with transition metals, showing the potential of carbocatalysts for the Fenton reaction.     

Strongly Emissive and Photostable Four‐Coordinate Organoboron N,C Chelates and Their Use in Fluorescence Microscopy

Six strongly fluorescent four‐coordinate organoboron N,C chelates containing an aryl isoquinoline skeleton were prepared. Remarkably, the fluorescence quantum yields reach values of up to 0.74 in oxygen‐free toluene. The strong B?N interaction was corroborated by the single‐crystal X‐ray analysis of two dyes. The intramolecular charge‐transfer character of the fluorophores was evidenced by solvatochromism studies and time‐dependent DFT calculations at the PCM(toluene)/CAM‐B3LYP/6‐311++G(2d,p)//PCM(toluene)/B3LYP/6‐311G(2d,p) level of theory. The compounds combine high chemical stability with high photostability, especially when equipped with electron‐donating substituents. The strong fluorescence and the large Stokes shifts predestine these compounds for use in confocal fluorescence microscopy. This was demonstrated for the imaging of the N13 mouse microglial cell line. Moreover, significant two‐photon absorption cross sections (up to 61 GM) allow the use of excitation wavelengths in the near‐infrared region (>800 nm).     

High-pressure synthesis and neutron diffraction investigation of the crystallographic and magnetic structure of TeNiO3 perovskite

TeNiO(3) has been prepared under moderate pressure conditions (3.5 GPa), starting from a reactive TeO(2) and Ni(OH)(2) mixture contained in a sealed platinum capsule under the reaction conditions (850 °C for 2 h). The sample has been studied by neutron powder diffraction (NPD) data and magnetization measurements. TeNiO(3) crystallizes in an orthorhombically-distorted perovskite structure (space group Pnma) with the unit cell parameters a = 5.9588(1) ?, b = 7.5028(1) ? and c = 5.2143(1) ?. The NiO(6) octahedral network is extremely tilted, shaping a trigonal-pyramidal environment for the Te, where it is effectively coordinated to three oxygen atoms at Te-O distances of 1.92 ?. Below T(N) ≈ 130 K, it experiences an antiferromagnetic ordering, as demonstrated by susceptibility and NPD measurements. Above the Néel temperature, a paramagnetic moment of 3.24(1) μ(B)/f.u. and θ(Weiss) = -199(1) K are obtained from the reciprocal susceptibility. Below T(N), the magnetic reflections observed in the neutron patterns can be indexed with a propagation vector k = 0. The magnetic structure corresponds to the magnetic mode G(y)F(z). The magnetic moments are oriented along the y-direction, with a canting along the z-axis. This ferromagnetic component explains the weak ferromagnetism observed in the magnetization isotherms; the infrequent shape of the magnetization cycles suggests a metamagnetic transition below 0.2 T. At T = 2.5 K, the ordered magnetic moment for the Ni(2+) ions is 1.88(5) μ(B) for the G(y) mode and 0.9(2) μ(B) for the F(x) mode.     

The role of oxidative etching in the synthesis of ultrathin single-crystalline Au nanowires

The fabrication of ultrathin single-crystal Au nanowires with high aspect ratio and that are stable in air is challenging. Recently, a simple wet-chemical approach using oleylamine has been reported for the synthesis of Au nanowires with micrometer length and 2 nm in diameter. Despite efforts to understand the mechanism of the reaction, an ultimate question about the role of oxygen (O(2)) during the synthesis remained unclear. Here we report that the synthesis of ultrathin Au nanowires employing oleylamine is strongly affected by the amount of O(2) absorbed in the reaction solution. Saturating the solution with O(2) leads to both a high-yield production of nanowires and an increase in their length. Nanowires with diameters of about 2 nm and lengths of 8 μm, which corresponds to an aspect ratio of approximately 4000, were produced. The role of oxygen is attributed to the enhanced oxidation of twin defects on Au nanoparticles formed in the first stage of the reaction. Understanding the role of oxidative etching is crucial to significantly increasing the yield and the length of ultrathin Au nanowires.     

Comparison of residual oil cluster size distribution, morphology and saturation in oil-wet and water-wet sandstone

We imaged an oil-wet sandstone at residual oil saturation (S(or)) conditions using X-ray micro-tomography with a nominal voxel size of (9 μm)(3) and monochromatic light from a synchrotron source. The sandstone was rendered oil-wet by ageing with a North Sea crude oil to represent a typical wettability encountered in hydrocarbon reservoirs. We measured a significantly lower S(or) for the oil-wet core (18.8%) than for an analogue water-wet core (35%). We analysed the residual oil cluster size distribution and find consistency with percolation theory that predicts a power-law cluster size distribution. We measure a power-law exponent τ=2.12 for the oil-wet core which is higher than τ for the water-wet system (τ=2.05), indicating fewer large clusters in the oil-wet case. The clusters are rough and sheet-like consistent with connectivity established through layers in the pore space and occupancy of the smaller pores; in contrast the clusters for water-wet media occupy the centres of the larger pores. These results imply less trapping of oil, but with a greater surface area for dissolution. In carbon storage applications, this suggests that in CO(2)-wet systems, capillary trapping is less significant, but that there is a large surface area for dissolution and reaction.     

Elemental mass spectrometry for quantitative proteomics

In the last decade mass-spectrometry-based proteomics has become an indispensable analytical tool for molecular biology, cellular biology and, lately, for the emerging systems biology. This review summarises the evolution and great potential of analytical methods based on elemental mass-spectrometric detection for quantitative proteomic analysis.     

Analysis of fumonisins B(1), B(2) and B(3) in corn-based baby food by pressurized liquid extraction and liquid chromatography/tandem mass spectrometry

A sensitive and reliable method using pressurized liquid extraction (PLE) and liquid chromatography (LC)/electrospray ionization (ESI) tandem mass spectrometry with a triple quadrupole (QqQ) analyzer has been developed for the analysis of fumonisin B(1) (FB(1)), fumonisin B(2) (FB(2)) and fumonisin B(3) (FB(3)) in corn-based baby foods. Influence of several extraction parameters that affect PLE efficiency such as temperature, pressure, solvent extraction, number of cycles and dispersant/clean-up agents were studied. The selected PLE operating method was: 3g of sample was packed into 11 ml stainless-steel cell and fumonisins were extracted with methanol at 40 degrees C, 34 atm in one cycle of 5 min at 60% flush. The analytes were ionized in ESI operating with positive ion mode and identified by selecting two monitoring transitions, permitting quantification and confirmation in a single injection. Recoveries ranged from 68% to 83% at fortification levels of 200 microg kg(-1) with relative standard deviation (RSD) from 4% to 12%. The limits of quantification were from 2 microg kg(-1) for FB(1) and FB(2), and 5 microg kg(-1) for FB(3), which are below the maximum residue level established by the European Union legislation in infant formulas. The proposed method was successfully applied to the analysis of twenty seven samples of baby food products collected from different markets, and one positive sample with a content of 15.9 microg kg(-1) for FB(1), 9.2 microg kg(-1)for FB(2) and 5.8 microg kg(-1) for FB(3) was obtained. Given the simplicity and potential of the proposed procedure, its application for safety control is recommended.     

Gold(I) and silver(I) complexes containing a tripodal tetraphosphine ligand: influence of the halogen and stoichiometry on the properties. The X-ray crystal structure of two gold(I) dimeric aggregates

Complexes of the type [Au2(micro-PP3)2]X2 [X=Cl (), Br (), I ()], [Ag2(micro-PP3)2](NO3)2 (), Ag(PP3)Cl (), M3(micro-PP3)X3 [M=Au, X=Cl (), Br (), I (); M=Ag, X=NO3 ()] and Au4(micro-PP3)X4 [X=Cl (), Br (), I ()] have been prepared by interaction between gold(I) or silver(I) salts and the ligand tris[2-(diphenylphosphino)ethyl]phosphine (PP3) in the appropriate molar ratio. Microanalysis, mass spectrometry, IR and NMR spectroscopies and conductivity measurements were used for characterization. and are ionic dinuclear species containing four-coordinate gold(i) and four/three coordinate silver(i), respectively. Solutions of behave as mixtures of complexes in a 2:1 [Au2(micro-PP3)X2; X=Cl(), Br(), I()] and 4:1 () metal to ligand ratio. and react with free PP(3) in solution to generate the ionic compounds and , respectively. Complexes and , with four linear PAuX fragments per molecule, were shown by X-ray diffraction to consist of dimeric aggregates via close intermolecular gold(I)gold(I) contacts of 3.270 A () and 3.184 A (). The resultant octanuclear systems have an inversion center with two symmetry-related gold(I) atoms being totally out of the aurophilic area and represent a new form of aggregation compared to that found in other halo complexes of gold(I) containing polyphosphines. The luminescence properties of the ligand and complexes, in the solid state, have been studied. Most of the gold systems display intense luminescent emission at room and low temperature. The influence of the halogen on the aurophilic contacts of compounds with a 4:1 metal to ligand ratio results in different photophysical properties, while and are luminescent complex is nonemissive. The luminescence increases with increasing the phosphine/metal ratio affording for complexes , without aurophilic contacts, the stronger emissions. Silver complexes and are nonemissive at room temperature and show weaker emissions than gold(I) species at 77 K.