Unsupported gold(I)-copper(I) interactions through eta1 Au-[Au(C6F5)2]- coordination to Cu+ Lewis acid sites

The reaction of the complex [Au2Ag2(C6F5)4)N[triple bond]CCH3)2]n (1) with 1 equiv of CuCl in the presence of 1 equiv of pyrimidine ligand leads to the formation of the heteronuclear Au(I)-Cu(I) organometallic polymer [Cu{Au(C6F5)2}(N[triple bond]CCH3)(mu2-C4H4N2)]n (2) through a transmetalation reaction. Complex 2 displays unprecedented unsupported Au(I)...Cu(I) interactions of [Au(C6F5)2]- units with the acid Cu(I) sites in a [Cu(N[triple bond]CCH3)(mu2-pyrimidine)]n+(n) polymeric chain. Complex 2 has a rich photophysics in solution and in the solid state.     

Synthesis of monoacyl A-ring precursors of 1alpha,25-dihydroxyvitamin D3 through selective enzymatic hydrolysis

An efficient synthesis of monoacylated 1alpha,25-dihydroxyvitamin D3 A-ring precursors 15, 16, 18, and 19 has been described through an enzymatic hydrolysis process. Candida antarctica A lipase (CAL-A) hydrolyzes the C-5 acetate ester in trans stereoisomers 9 and 13, with complete and high selectivity, respectively. In the case of cis isomers 11 and 14, Chromobacterium viscosum lipase (CVL) is the enzyme of choice, exhibiting opposite selectivity for these two enantiomers. This lipase selectively catalyzes the hydrolysis at the C-3 acetate in diester 11 and at C-5 position in diester 14. It is noteworthy that through a hydrolysis reaction CAL-A and CVL allow the synthesis of the four A-ring monoacetylated precursors of 1alpha,25-dihydroxyvitamin D3, precursors which are complementary to those obtained by the enzymatic acylation process. In addition, with excellent yield CVL selectively hydrolyzes the C-3 chloroacetate ester instead of the C-5 acetate in diester 22, a key intermediate in the synthesis of new A-ring modified 1alpha,25-dihydroxyvitamin D3 analogues.     

Evaluation of surface- and ground-water pollution due to herbicides in agricultural areas of Zamora and Salamanca (Spain)

The pollution of agricultural land due to herbicides was assessed in the Guare?a and Almar river basins, situated in the provinces of Zamora and Salamanca (Spain). A set of fifteen herbicides, including triazines, ureas, amides and others, was selected owing to their frequency of use, the amounts used, their toxicity and their persistence in the environment. Solid-phase extraction with polymeric cartridges, followed by HPLC with diode-array detection, were used to monitor the herbicides. This technique was chosen owing to the wide range of functionality and polarity of the analytes under study. The detection limits obtained were in the 0.004-0.025 microg/l range (lambda=220 nm). Surface and ground waters, taken from different locations in the basins, were analyzed over a 6-month period. The presence of six out of the fifteen herbicides monitored--chlortoluron, atrazine, terbutryn, alachlor, diflufenican and fluazifop-butyl--was detected in several samples at levels ranging from the detection limit to 1.2 microg/l. The relationship of these herbicides to the agricultural activities of the zone is discussed.     

Synthesis, solid-state structure, and bonding analysis of the beryllocenes [Be(C5Me4H)2], [Be(C5Me5)2], and [Be(C5Me5)(C5Me4H)

The beryllocenes [Be(C(5)Me(4)H)(2)] (1), [Be(C(5)Me(5))(2)] (2), and [Be(C(5)Me(5))(C(5)Me(4)H)] (3) have been prepared from BeCl(2) and the appropriate KCp' reagent in toluene/diethyl ether solvent mixtures. The synthesis of 1 is facile (20 degrees C, overnight), but generation of decamethylberyllocene 2 demands high temperatures (ca. 115 degrees C) and extended reaction times (3-4 days). The mixed-ring beryllocene 3 is obtained when the known [(eta(5)-C(5)Me(5))BeCl] is allowed to react with K[C(5)Me(4)H], once more under somewhat forcing conditions (115 degrees C, 36 h). The structures of the three metallocenes have been determined by low-temperature X-ray studies. Both 1 and 3 present eta5/eta1 geometries of the slip-sandwich type, whereas 2 exhibits an almost regular, ferrocene-like, sandwich structure. In the mixed-ring compound 3, C(5)Me(5) is centrally bound to beryllium and the eta(1)-C(5)Me(4)H ring bonds to the metal through the unique CH carbon atom. This is also the binding mode of the eta(1)-ring of 1. To analyze the nature of the bonding in these molecules, theoretical calculations at different levels of theory have been performed on compounds 2 and 3, and a comparison with the bonding in [Be(C(5)H(5))(2)] has been made. As for the latter molecule, energy differences between the eta5/eta5 and the eta5/eta1 structures of 2 are very small, being of the order of a few kcal mol(-1). Constrained space orbital variations (CSOV) calculations show that the covalent character in the bonding is larger for [Be(C(5)Me(5))(2)] than for [Be(C(5)H(5))(2)] due to larger charge delocalization and to increased polarizability of the C(5)Me(5) fragment.     

Preparation of new monoanionic "scorpionate" ligands: synthesis and structural characterization of titanium(IV) complexes bearing this class of ligand

The preparation of new "scorpionate" ligands in the form of the lithium derivatives [(Li(bdmpzdta)(H(2)O))(4)] (1) [bdmpzdta = bis(3,5-dimethylpyrazol-1-yl)dithioacetate], [Li(bdphpza)(H(2)O)(THF)] (2) [bdphpza = bis(3,5-diphenylpyrazol-1-yl)acetate], and [Li(bdphpzdta)(H(2)O)(THF)] (3) [bdphpzdta = bis(3,5-diphenylpyrazol-1-yl)dithioacetate] has been carried out. Furthermore, a series of titanium complexes has been prepared by reaction of TiCl(4)(THF)(2) with the lithium reagents [(Li(bdmpza)(H(2)O))(4)] (4) [bdmpza = bis(3,5-dimethylpyrazol-1-yl)acetate] and 1. Under the appropriate experimental conditions neutral complexes, namely [TiCl(3)(kappa(3)-bdmpza)] (5), [TiCl(3)(kappa(3)-bdmpzdta)] (6), and [TiCl(2)(kappa(2)-bdmpzdta)(2)] (7), and cationic complexes, namely [TiCl(2)(THF)(kappa(3)-bdmpza)]Cl (8) and [TiCl(2)(THF)(kappa(3)-bdmpzdta)]Cl (9), were isolated. Complexes 8 and 9 undergo an interesting nucleophilic THF ring-opening reaction to give the corresponding alkoxide-containing species [TiCl(2)(kappa(3)-bdmpza)(O(CH(2))(4)Cl)] (10) and [TiCl(2)(kappa(3)-bdmpzdta)(O(CH(2))(4)Cl)] (11). A family of alkoxide-containing complexes of general formulas [TiCl(2)(kappa(3)-bdmpza)(OR)] [R = Me (12); R = Et (14); R = (i)Pr (16); R = (t)Bu (18)] and [TiCl(2)(kappa(3)-bdmpzdta)(OR)] [R = Me (13); R = Et (15); R = (i)Pr (17)] was also prepared. The structures of these complexes have been determined by spectroscopic methods, and in addition, the X-ray crystal structures of 3, 7, 10, and 11 were also established.     

Selenium speciation by coupling vesicle mediated HPLC with off-line ETAAS and on-line focused microwave digestion HG-AAS detection

A novel High Performance Liquid Chromatography (HPLC) method for the separation of selenium species with specific detection by off-line Electrothermal Atomization Atomic Absorption Spectrometry (ETAAS) or on-line focused microwave digestion (MW) Hydride Generation Atomic Absorption Spectrometry (HG-AAS) is described. Vesicular mobile phases of the cationic surfactant didodecyldimethylammonium bromide (DDAB) have been evaluated for the liquid chromatographic separation of inorganic selenium (selenite and selenate) and different selenoaminoacids (selenocystine, selenomethionine and selenoethionine) on a C(18) reversed-phase column modified by DDAB molecules. The effects of different parameters (pH, buffer and vesicle concentrations) of the mobile phase on the retention times have been determined. The detection limit for selenium with the proposed off-line HPLC-ETAAS method has been found to be 5 microg/L of Se. The detection limit using HPLC-"on line" focused microwave digestion-HG-AAS has been found to be 1 microg/L of Se, with a precision (repeatability) better than +/- 5%. The latter proved to be an exceptional on-line real-time chromatographic detector for selenium speciation purposes.     

A sensitive spectrophotometric method for lead determination by flow injection analysis with on-line preconcentration

A new flow injection (FI) system for the determination of Pb(II) at trace level with a preconcentration step and spectrophotometric detection is proposed. It is based on preconcentration of lead ions on chitosan and dithizone-lead complex formation in aqueous medium (pH 9). The chemicals and FIA variables influencing the performance of the system were optimized and applied to the determination of lead in natural, well, and drinking water samples. It is a simple, highly sensitive, and low cost alternative methodology. The method provided a linear rage between 25 and 250 μg l⁻¹, a detection limit of 5.0 ng ml⁻¹ and a sample throughput of 15 h⁻¹. The obtained results of spiked samples are in good agreement between the proposed method and ICP-AES.     

Immunosorbents: A new tool for pesticide sample handling in environmental analysis

 Immunoaffinity techniques have been widely used for the determination of different analytes in the medical field. However the use of antibodies immobilized in an appropriate support material to preconcentrate pesticides from environmental samples is only recent. The production of antibodies, election of supports, antibody immobilization procedures, elution of analytes from immunosorbents and the more recent applications in the field of pesticide analysis are reviewed. The present review concludes that immunosorbents have great potential and discusses the present limitations and expected future trends. Received: 29 July 1996 / Accepted: 14 August 1996     

Synthesis, characterization, biocide and toxicological activities of di-n-butyl- and diphenyl-tin(IV)-salicyliden-beta-amino alcohol derivatives

The one pot reaction of salicylaldehyde 1, beta-amino alcohols 2a-2c, and di-n-butyltin(IV) oxide 3a or diphenyltin(IV) oxide 3b produced five diorganotin(IV) compounds, 4a-4c, 5a, and 5c, in good yields. All compounds were characterized by IR, (1)H, (13)C, and (119)Sn NMR spectroscopy, and elemental analysis; furthermore, compounds 4b, 4c, 5a, and 5c were characterized by X-ray diffraction analysis. After the structural characterization, all of the compounds were tested in vitro against Bacillus subtilis (Gram-positive, strain ATCC 6633), Escherichia coli (Gram-negative, strain DH5alpha), Pseudomonas aeruginosa (Gram-negative, strain BH3), Desulfovibrio longus (strain DSM 6739), and Desulfomicrobium aspheronum (strain DSM 5918) to assess their antimicrobial activity. Compounds 4 and 5 demonstrated a wide range of bactericidal activities against the tested aerobic (one Gram-positive and two Gram-negative subtypes) and anaerobic bacteria (two sulfate-reducing bacteria, SRB). Compound 5 had better bactericidal performances than compound 4. For all of the compounds, the acute toxicity was measured using luminescent bacteria toxicity (LBT-Microtox) tests to track their further environmental impact. According to these results and in order to fulfill environmental regulations, the toxicity of the compounds studied herein can be modulated through the proper selection of the disubstituted tin(IV) moiety.     

Optimisation and comparison of microwave-assisted extraction and Soxhlet extraction for the determination of polychlorinated biphenyls in soil samples using an experimental design approach

Optimisation of microwave-assisted extraction (MAE) for the extraction of polychlorinated biphenyls (PCBs) from soil samples has been accomplished using an experimental design approach. Variables studied have been: percentage of acetone (v/v) in an acetone:n-hexane mixture, solvent volume, extraction time, microwave power and pressure inside the extraction vessel. Five samples of a certified soil (CRM 481) have been extracted under the optimum conditions of the developed method and the results have been compared to those obtained by Soxhlet extraction. Good recoveries (>95%) have been obtained for all the PCBs studied. All extracts have been analysed by gas chromatography/mass spectrometry (GC/MS) and an optimum determination method for the electron impact mass spectrometric (EIMS) has also been developed.