Synthesis and characterization of composite Au/TiO2 nanoparticles by laser irradiation

Composite Au/TiO₂ nanoparticles were synthesized by laser ablation of gold plate in TiO₂ sol. The nanoparticles were characterized by UV-visible spectroscopy, transmission electron microscopy, X-ray diffraction, and atomic force microscopy. The peak of surface plasmon is at 550 nm with a red shift of 30 nm compared with that of Au nanoparticles in water. Monolayers of composite Au/TiO₂ nanoparticles were obtained by dip-coating technique. The XRD pattern of Au/TiO₂ powders resembles a mixture of anatase TiO₂ and gold.     

Monolithic molecularly imprinted cryogel for lysozyme recognition

The application of molecularly imprinted polymers in the selective adsorption of macromolecules such as proteins by monolithic protein‐imprinted columns requires a macroporous structure, which can be provided by cryogelation at low temperature in which the formation of ice crystals gives a porous structure to the molecularly imprinted polymer. In this study, we applied this technique to synthesize lysozyme‐imprinted polyacrylamide cryogels containing 8% w/v of total monomers and 0.3% w/v of lysozyme. The synthesized cryogel was sponge‐like and elastic with very fast swelling and reshaping properties, showing a swelling ratio of 24.5 ± 3 and gel fraction yield of about 72%. It showed an imprinting effect of 1.58 and a separation factor of 1.37 for cytochrome c as the competing protein. Adsorption studies on the cryogel revealed that it follows the Langmuir isotherm, with a maximum theoretical adsorption capacity of 36.3 mg lysozyme per gram of cryogel. Additionally, it was shown that a salt‐free rebinding solution at low flow rate and pH = 7.0 is favorable for lysozyme rebinding. This kind of monolithic column promises a wide range of application in separation of various biomolecules due to its preparation simplicity, good rebinding characteristics, and macroporosity.     

Pharmacophore elucidation and 3D-QSAR analysis of a new class of highly potent inhibitors of acid ceramidase based on maximum common substructure and field fit alignment methods

Comparative molecular field analysis (CoMFA) and comparative similarity indices analysis (CoMSIA) studies have been carried on a series of 2,4-dioxopyrimidine-1-carboxamides as acid ceramidase inhibitors. Two alignment rules for the compounds were defined using maximum common substructure and field fit. The best orientation was then searched by all-orientation search strategy, to minimize the effect of the initial orientation of the structures. The Kennard Stone algorithm was used to divide the entire set into training (25 compounds) and test (7 compounds) sets. Pharmacophore model identification was also performed using DISCOtech algorithm and refinement was carried out using GASP, to highlight important structural features that could be responsible for the inhibitory activity. All constructed models showed appropriate statistical parameters in terms of q ² and r _pred ² . Based upon the information obtained from CoMFA, CoMSIA, and developed pharmacophore pattern, some key features that may be used to design new inhibitors for acid ceramidase have been identified.     

Synthesis of Tungsten Oxide Nanorods by the Controlling Precipitation Reaction: Application for Hydrogen Evolution Reaction on a WO3 Nanorods/Carbon Nanotubes Composite Film Modified Electrode

Tungsten trioxide nanorods (WO₃) were prepared by controlling the precipitation reaction of sodium tungstate dehydrates solution and hydrothermal process. The synthesized tungsten trioxide nanorods have been characterized by X‐ray diffraction (XRD), energy dispersive spectroscopy (EDS), scanning electron microscopy (SEM), cyclic voltammetry (CV) and linear sweep voltammetry (LSV). Electrochemical activity for hydrogen evolution reaction (HER) on WO₃ nanorods / carbon nanotube (WO₃/CNT) composite electrocatalyst was first studied in acid solution (0.1 M H₂SO₄) at room temperature. The overall experimental results revealed that the electrocatalytic activity for HER on WO₃/CNT is two order magnitude higher than those obtained with WO₃ nanorods and is four times than in the case of commercial WO₃ in 0.1 M H₂SO₄. On the other hand, the kinetic reaction mechanisms were discussed on WO₃/CNT electrocatalysts in acid solution for HER. However, the rate‐determining step carries through Tafel reaction on commercial WO₃, CNT, WO₃ nanorods and WO₃/CNT electrocatalysts in acidic solution was introduced.     

Electronic and Chemical Characterization of Aluminum–Nitrogen (AlN) Substituted Fullerenes: C58AlN to C24Al12N12

Density functional theory calculations (B3LYP/6-311G*) are applied to devise a series of AlN-substituted C₆₀ fullerenes, avoiding weak homonuclear Al–Al and N–N bonds. The substitutional structures, energy gaps between the highest occupied molecular orbital and the lowest unoccupied molecular orbital, ionization potentials, binding energies, as well as dipole moments have been systematically investigated. The band gap (HOMO–LUMO gap) is larger for all the AlN-substituted fullerenes than C₆₀. The properties of heterofullerenes, especially, the HOMO–LUMO strongly depend on the number of AlN units. Natural charge analyses indicate that doping of fullerene with AlN units exerts electronic environment diversity to the cage. High charge transfer on the surfaces of our heterofullerenes provokes more studies on their possible application for hydrogen storage.     

Kinetic studies on the extraction of uranium(VI) from phosphoric acid medium by bulk liquid membrane containing di-2-ethylhexyl phosphoric acid

To go through the first stage of industrial solvent extraction process in order to recover uranium from phosphate rocks by liquid membrane techniques, as a simple model, the kinetics of facilitated transport of uranium(VI) from a dilute phosphoric acid medium into more concentrated phosphoric acid media as a receiving phase through a bulk liquid membrane containing di-2-ethylhexyl phosphoric acid as a carrier was studied. The influence of phosphoric acid concentration in the source and receiving phases, carrier concentration, type of solvent, stirring speed and temperature were investigated. The kinetic parameters (k _e, k _s, t _max, J _max) were calculated for the interface reactions assuming two consecutive, irreversible first-order reactions. The activation energy values were calculated as 29.40 and 19.51 kJ mol^?1 for extraction and stripping, respectively. The values of calculated activation energy indicated that both the extraction and stripping processes were controlled by mixed regime (both kinetic and diffusion). In addition, the influence of adding trioctyl-phosphine oxide into the membrane phase as a synergic agent on the transport kinetics was determined.     

二氧化锡纳米粒子催化四组分Hantzsch缩合合成多氢喹啉衍生物(英文)

Tin dioxide (SnO2 ) nanoparticles efficiently catalyzed unsymmetrical four-component Hantzsch condensations of various aldehydes, dimedone, ethyl acetoacetate, and ammonium acetate to form polyhydroquinoline derivatives in excellent yields. This novel method offers several advantages over the traditional method of synthesizing these compounds, including safety, mild conditions, short reaction times, high yields, and an easy workup.     

Synthesis of oleylamine capped copper nanocrystals via thermal reduction of a new precursor

The present investigation reports the novel synthesis of copper nanocrystals using thermal reduction, and their physicochemical characterization. The copper nanocrystal powder has been prepared using [bis(2-hydroxyacetophenato)copper(II)] as a precursor. The effect of oleylamine and triphenylphosphine on the particle morphology has been investigated. Transmission electron microscopy (TEM) analysis has demonstrated that the copper nanocrystals have an average diameter of about 3 nm. The as-prepared copper nanocrystals were characterized by XRD, SEM, TEM, EDX, UV–Vis and FTIR.