Rational Design of a Near-infrared Fluorescent Material with High Solid-state Efficiency,Aggregation-induced Emission and Live Cell Imaging Property

Near-infrared(NIR) fluorescent materials with high photoluminescent quantum yields(PLQYs) have wide application prospects. Therefore, we design and synthesize a D-A type NIR organic molecule, TPATHCNE, in which triphenylamine and thiophene are utilized as the donors and fumaronitrile is applied as the acceptor. We systematically investigate its molecular structure and photophysical property. TPATHCNE shows high T_gof 110℃ and T_d of 385℃ and displays an aggregation-induced emission(AIE) property. A narrow optical bandgap of 1.65 eV is obtained. The non-doped film of TPATHCNE exhibits a high PLQY of 40.3% with an emission peak at 732 nm, which is among the best values of NIR emitters. When TPATHCNE is applied in organic light-emitting diode(OLED), the electroluminescent peak is located at 716 nm with a maximum external quantum efficiency of 0.83%. With the potential in cell imaging, the polystyrene maleic anhydride(PMSA) modified TPATHCNE nanoparticles(NPs) emit strong fluorescence when labeling HeLa cancer cells, suggesting that TPATHCNE can be used as a fluorescent carrier for specific staining or drug delivery for cellular imaging. TPATHCNE NPs fabricated by bovine serum protein(BSA) are cultivated with mononuclear yeast cells, and the intense intracellular red fluorescence indicates that it can be adopted as a specific stain for imaging.     

脱氧核糖核酸与对二甲氨基偶氮苯邻羧酸作用机理的荧光光谱研究

通过实验,采用荧光光谱法研究了对二甲氨基偶氮苯邻羧酸(JJR)与脱氧核糖核酸(DNA)结合反应的特征.由Stern-Volmer方程和双倒数曲线Lineweaver-Burk方程获得了反应的猝灭常数Ksv=1×106～2×106 L/mol、结合常数KA≈0.5×106 mol/L以及对猝灭的类型做出了推断.通过热力学参数、离子强度实验讨论并得到它们以氢键、嵌插入、范德华力等几种方式作用.该反应的最佳实验条件为pH值控制在6.1左右;加入顺序为JJR+DNA+(B-R)适宜反应体系;线性范围在0～100 mg/L之间.     

氨基酸植物组织传感器的研究

选择苹果及仙人球的组织切片作生物催化材料,同氨气敏电极组合,研制了2种对L-谷氨酰胺及L-天冬酰胺选择响应的新型的组织传感器。研究和讨论了传感器的最佳工作条件。用该组织传感器测定了L-天冬酰胺脱氨酶和L-谷氨酰胺脱氨酶的动力学参数K_m和V_m。     

三硒化二铒Er_2Se_3的合成与结构

采用高温固相反应和化学气相传输法合成三硒化二铒。晶体属于四方晶系，Ｍ_ｒ＝５７１．４０，空间群为Ｐ４／ｎｍｍ，ａ＝３．９８４（１），ｃ＝８．２２８（３），Ｖ＝１３０．５９（７），Ｚ＝１，Ｄ_ｃ＝７，２７ｇ／ｃｍ￣３，Ｆ（０００）＝２３８，μ（ＭｏＫα）＝５２８．８６ｃｍ￣（－１），对于１８７个Ｉ≥３σ（Ｉ）的独立衍射点，最后偏离因子Ｒ＝０．０６６，Ｒ_ｗ＝０．０７８。化合物Ｅｒ_２Ｓｅ_３的晶体结构是由Ｅｒ配位多面体的双层状结构通过共用Ｓｅ（２）原子，沿ｃ轴方向堆积而形成的三维结构。     

中药现代化基础理论研究的几点思考

我国中药现代化基础理论研究应立足于提高我国人口素质及健康水平,促进国民经济发展（国家目标）。以传统中医药理论为基础,以现代生物医学与技术为指导（指导思想）,围绕以下几个方面来进行：（１）治疗常见病、疑难病、多发病新药的创制;（２）为创制新药所需要的稳...     

离子色谱法测定水果及其树叶的含氯量

本文提出用离子色谱法测定水果及其树叶中氯含量的方法,在IC-PAK阴离子柱上,用4 mmol/L邻苯二甲酸(pH4.5)作流动相进行洗脱,电导检测器检测。方法简便、快速,灵敏、准确。氯的最小检出量为0.14μg,相对标准偏差为2.4%,回收率为99.4%。     

甲壳素-壳聚糖对皂土悬浮液的絮凝

研究了三种摩尔质量大体相同而脱乙酰度分别为93%、78%和62%的甲壳素-壳聚糖在pH=3～6范围内对皂土悬浮液的絮凝性质, 并与非离子型絮凝剂聚丙烯酰胺作了比较, 证明含自由氨基的甲壳素-壳聚糖在酸性溶液中形成阳离子聚电解质后. 对带负电的皂土悬浮颗粒有很好的絮凝能力. 通过对上述三种聚合物的絮凝能力、在皂土颗粒表面的吸附量等测定, 认为絮凝中桥连机制起了主导作用, 但聚合物所带正电荷则有利于被皂土颗粒所吸附, 电中和还降低了颗粒间的静电排斥, 这都对桥连絮凝起了促进作用. 聚丙烯酰胺分子在水中不带电, 故当介质pH升高使皂土颗粒双电层变厚时, 絮凝能力迅速下降.     

Prevention of postoperative tendon adhesion by biodegradable electrospun membrane of poly(lactide-co-glycolide)

An electrospun poly(lactide-co-glycolide)(PLGA) membrane was prepared and used to perform the anti-adhesion of Achilles tendon. Throughout the experiments, the membrane showed an appropriate degradation rate, and the p H values of degradation media were maintained at around 7.4. Simultaneously, the excellent biocompatibility of the membrane in vitro and in vivo was confirmed by live/dead and histopathological analyses. Meanwhile, the membrane can reduce tendon adhesion significantly and promote functional recovery effectively. The encouraging results were further demonstrated by hematoxylin and eosin(HE), and Masson's trichrome stainings, and type I collagen immunohistochemical analysis. It was concluded that the model treated with the electrospun PLGA membrane was significantly better with respect to the adhesion prevention and tissue repair than that without treatment. Considering the results of degradation and adhesion prevention efficacy, the electrospun PLGA membrane would be a great candidate for the prevention of postoperative tendon adhesion.     

光伏太阳能电池生产过程中的污染问题

日益壮大的光伏产业正在为人类发展作出积极的贡献.采用光伏发电来代替传统的发电技术,将会减少89%的空气污染.然而,在这个倡导绿色环境的时代,光伏器件生产引起的环境、健康和安全（EHS）问题也日益引起社会各界的广泛关注.认清光伏产品在生产过程中污染的真相对维持光伏产业的可持续发展有着相当重要的意义.本文综述了常见太阳能电池的EHS问题,并提出了可以减少污染的有效途径;采用生命周期评估（LCA）方法进一步比较了各种太阳能电池生产过程中污染物的排放量数据.