119Sn and121Sb Mössbauer studies of BaSn1−x Sb x O3 Perovskite system

The relations between the electrical characteristics of BaSn_1?x Sb _x O₃ perovskite system and the contents of BaO, Sb₂O₃ and silicate sintering agent were studied by X-ray diffraction analysis and Mössbauer spectroscopy. It was found that the electrical conductivity is related to the substitution of Sb³⁺ for Sn⁴⁺, the content of sintering agent and the phase constitutents in samples. BaSnO₃, Ba₃Sn₂O₇, Ba₂SnO₄ and SnO₂ phases might appear in different fractions when the contents of BaO change from 0.5 mole to 3.5 mole. In low antimony percentage condition, pentavalent Sb³⁺ ions inserted in Sn⁴⁺ sites and formed the donor center. In high antimony percentage (x≥0.20) condition, the existence of an insulating phase (BaSb₂O₆) was confirmed.     

MNA/PMMA有机薄膜光波导

研究出MNA/PMMA有机薄膜光波导。用棱镜耦合器进行了波导参数的测量,发现薄膜呈现各向异性,有较大的双折射。     

An order-by-disorder process in the cyclic phase of spin-2 condensate with a weak magnetic field

We present in this paper a model study on the “order-by-disorder” process in the cyclic phase of spin-2 condensate, which forms a family of incommensurable, spiral degenerate ground states. On the basis of the ordering mechanism of entropic splitting, it is demonstrated that the energy corrections resulting from quantum fluctuations of disorder lift the accidental degeneracy of the cyclic configurations and thus lead to an eventual spiral order called the cyclic order. The order-by-disorder phenomenon is then realized even if the magnetic field exists. Finally, we show that our theoretic observations can be verified experimentally by direct detection of the cyclic order in the ⁸⁷Rb condensate of a spin-2 manifold with a weak magnetic field.     

TiO2 Nanotube Array/Monolayer Graphene Film Schottky Junction Ultraviolet Light Photodetectors

Schottky junctions made from a titanium dioxide nanotube (TiO₂NT) array in contact with a monolayer graphene (MLG) film are fabricated and utilized for UV light detection. The TiO₂NT array is synthesized by the anodization and the MLG through a simple chemical vapor deposition process. Photoconductive analysis shows that the fabricated Schottky junction photodetector (PD) is sensitive to UV light illumination with good stability and reproducibility. The corresponding responsivity (R), photoconductive gain (G), and detectivity (D*) are calculated to be 15 A W^?1, 51, and 1.5 × 10¹² cm Hz^1/2 W^?1, respectively. It is observed that the fabricated PD exhibits spectral sensitivity and a simple power‐law dependence on light intensity. Moreover, the height of the Schottky junction diode is derived to be 0.59 V by using a low temperature I–V measurement. Finally, the working mechanism of the TiO₂NT array/MLG film Schottky junction PD is elucidated.     

Femtosecond laser micromachined optical waveguides in LiTaO3 crystal

By using femtosecond laser micromachining, optical wave guides in both depressed cladding and dual‐line configurations have been produced in LiTaO₃ crystal. The guiding properties and the thermal stability have been investigated for both geometries, which exhibit different performance. Depressed cladding waveguides support guidance along both extraordinary and ordinary index polarizations, while dual‐line waveguides support only extraordinary index polarization. Thermal annealing has been proved to be an effective method to reduce the propagation losses. For the cladding waveguide, the lowest propagation loss was as low as 0.38 dB/cm after the annealing treatment at 400 °C. (© 2013 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

热对流条件下颗粒沉降的格子Boltzmann方法模拟

采用格子Boltzmann方法模拟了在热对流条件下的颗粒沉降问题, 在研究单颗粒在等温流体、热流体和冷流体中运动的基础上, 进一步模拟了两个不同温度的颗粒在流体中的沉降.结果表明:两等温颗粒的沉降方式与雷诺数Re以及格拉晓夫数Gr密切相关, 而两不同温度的颗粒与两等温颗粒的沉降规律有显著不同.无论初始位置如何, 冷颗粒最终总位于热颗粒下方运动, Re较大时, 发生连续的拖曳、接触现象, 而Re较小时, 冷颗粒会以较大的沉降速度远离热颗粒. 关键词： 格子Boltzmann方法 颗粒沉降 热对流     

偏分复用系统中偏振模色散补偿与偏分解复用一体化方案

本文建立了偏分复用系统中偏振模色散与信号偏振态变化引起信道串扰的数学模型, 分析了偏振模色散对偏分复用信道射频功率的影响, 并提出了适用于偏分复用系统的光域偏振模色散补偿与偏分解复用同时进行的方案: 用信道的射频功率作为反馈控制信号, 监测链路中偏振模色散和偏振态变化引起的信道串扰的大小, 用改进的粒子群优化算法对偏振控制器进行自适应控制, 同时完成偏振模色散补偿与偏分解复用. 在112 Gb/s偏分复用-差分正交相移键控(PDM-DQPSK)传输系统中仿真验证了该方案的有效性. 结果表明该方案可以使112 Gb/s-PDM-DQPSK传输系统完成自适应偏分解复用的同时, 在1 dB的光信噪比代价下, 使系统对偏振模色散的容忍度提高20 ps. 关键词： 偏分复用系统 信道串扰 偏振模色散 偏分解复用